Help with installing my version LR 3 on my iMac CD (no optical drive)

Similar Questions

• Help with installing previously bought CS5 on the new iMac.

  Today I bought a new iMac, when I got home and started putting in place I realized, he didn't have a CD player (very attentive to me), and now I'm totally stuck with how to get my macbook on my new mac CS5.

  Ive asked for help on Apple and Adobe cat. The cat from Adobe told me that they do not support it more because it isn't CS6 so now I am totally confused and worried, I'll have to pay a charge more money for the software, I need for my coursewhich I already bought once!

  HELP ME PLEASE!

  
  

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5:

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

• I bought a HP with Windows 10 Tower preloaded. Is there place where I can get help with installing Windows 7?

  * Original title: Windows 10 disappointment

  Recently, I bought a HP with Windows 10 Tower preloaded.  I gave up 10.  I would like to return to the Windows 7 desktop.  If I buy or buy this software, I guess I have to 'wipe' 10 of my machine?  Or I would just download 7 top?   What I have found online are instructions for people who have updated to 10 and want to revert to an earlier version of windows.  In my case, I never had an earlier version on the machine I have now.  Is there place where I can get help with installing Windows 7?  Online, local dealer?  Thank you.

  If I were you, I call HP and tell them that you do not want this computer with Win10.  They are very likely still sells machines with Win7 for businesses, because most companies do not affect the Win10 with a 10 foot barge pole.

  Dell is selling them for sure.  I've been helping my clients by computers Dell Win7 for a very long time now and just had one on my desk a week ago.  Look at the range of Dell Vostro of computers.

  The trick is to approach Dell as a businessman, and not as a normal consumer.

• help with my purchased version

  I loaded elements, entered the redemption code, got a serial number, but it says the serial number is invalid can not install. I loaded the trial version and it works, but I need help with my purchased version

  Thanks I thought about it. Windows. Responsible for the trial and from there, got the serial number and there

  Sent from my Verizon Wireless 4 G LTE smartphone

• need help with the mac version of PES

  need help with the mac version of PES

  If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  p.s. If you need a more direct link, you must specify the exact version you want.

• Help with installing Creative Suite 5.5 on your other Mac.

  I had installed a version of the education of the Creative Suite 5.5 on Mac Pros a few years ago and since then the application deleted both. Now I try to install my Creative Suite 5.5 on my recent Mac Pro with the my serial number, but the installation will not complete a final stage. How can I get my serial number to not recognize the previous two Mac computers?

  You need to disable this feature before you uninstall a program

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Need help with installing XP on Satellite P200-IEE

  I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
  My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
  It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.

  HELP Please

  There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
  Some won't take only short xp. (for one, made this mistake on a new laptop!)

  Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...

  Concerning

  Published by: ADMIN

• Hi, I need help with installing updates for CS5

  Hi, I need help with the installation of the updates of CS5. I get the following message: some updates to installation failure. My product is already registered. Can someone help me, please?

  Erkan please download and apply updates directly from updates.

• Cannot install a version upgrade of Windows Vista after changing the hard drive.

  Original title: my computer gives me a warning... saying backup.

  My hard drive is bad.  I can feel it.

  Keep the system lock up and rebooting message says cable and BAD status.

  I took the hard drive... put in a new one... and now it says I can't install vista.

  I have the version upgrade.

  I put XP on this drive and upgrade again.  Y at - it something I can do.

  I want to just reinstall windows vista on a new drive.  How can I accomplish this.

  The bad hard drive still works and is accessible it is not stable and keeps locking up.

  The full version of XP that I have is out of licenses.  Help Help

  Hi Rob,

  You must install first Windows XP and upgrade to Windows Vista.

  If you have a genuine copy of Windows XP, after you install Windows XP you can contact support for Microsoft's Activation to activate the copy of Windows XP.

  For more information, you can consult the following articles:

  Upgrade Windows XP to Windows Vista

  How to activate Windows XP

• Need help with installing Win7 on Satellite L70-A-12W

  I bought Satellite L70-A-12W with preinstalled victory 8.1 two days ago... I have no recovery of win7, but I have Win7 64 Bit DVD new.
  I would like to install win 7. I follow the instructions concerning the closing down, on Bios (I have version 1.3) safety boot is disabled and the boot mode is MSC mode.

  I did a recovery on USB media if something with is wrong. Earn 8.1 I installed Paragon Partition Manager 14 (free version) and see the Partition Table. It UriPattern like this:
  1 partition - system - 1-GB NTFS (Partition of Service);
  2. partition (no name) - 100 MB - it's the gray color.
  3 partition (local partition) - 128 MB;
  4 partition C: (win 8.1) - Go 920 - NTFS drive.
  5. partition - recovery - 10.1 GB - NTFS (Partition OEM Service).

  I would like to keep evrything what is, if possible, and instead og Win8.1 install Win 7 ultimate 64-bit (which I have). And after than that, resize this partition of 100 GB and make a second partition private for my data - partition D: - for example.

  I did things in the BIOS and win7 DVD and got error massage: Windows cannot be installed to this disk. The selected disk is of the GPT Style partition...

  I found a solution to clean the disc in the BACK, but I'm not sure that I have with this procedure will delete oll data disc. I'll guarantee loos e if I do this... If all other partitions will remain instead of C--> I can always make backup returns with media recovery with win 8.1 and hopes to keep the warranty.

  Now, I don't know what I have to do...

  I would just have win 7 on my laptop with minimal change to the partition table and all the partitions instead of C (where now is win 8.1).

  Could you please help me...

  Hello

  The question is: why you want to keep the present partitions on the HARD disk.
  Using two systems Win 8 and Win 7 on this laptop?

  The fact is that if you want to use only Windows 7, it s not appropriate to keep the old partitions on the HARD disk.

  Secondly, you already have the Toshiba Recovery flash memory stick.
  This recovery media allows you to return to the factory settings.

  This means that recover the laptop using this memory flash USB stick recovery would again create the same partitions and install the Win 8.1 System.

  Finally and above all Windows 7 supports 4 primary partitions as primary partitions are applicable to the tables of partition MBR and partition table MBR allow four primary partitions.

  After you create the primary partition 4th Windows system will accept only the volumes 'Dynamics' (logical drives). You must create an extended partition containing many logical partitions.

  However, if you use a table of GPT partition that is supported by the 64-bit Windows versions, you can configure up to 128 partitions and you need t differ between "primary" and "extended" partitions

  In addition, the GPT partition table also requires the UEFI BIOS.

  More details here:
  http://support.Microsoft.com/kb/2581408

• Need help with installing the driver Vista for Satellite A200-23U

  INSTALL THE

  WINDOWS VISTA
  N ° Version of the component name
  1 Windows Vista RTM
  2 native Intel ICH7M Chipset utility
  3 945GM Intel display driver
  or
  3 nVIDIA Display Driver G72MV-A3/NB7P-GS
  Realtek Audio driver ALC861D 4
  5 Realtek 8101E 10/100 / Driver LAN Gigabit 8111
  6 Synaptics Touch Pad Driver (with LuxPad)
  7 ALPS Touch Pad Driver
  8 card reader TI Multiple digital media
  9 TOSHIBA software modem
  10 Golan Intel Wireless LAN Driver
  11 Kedron Intel Wireless LAN Driver
  12 Atheros Wireless LAN Driver
  Camera Chicony 13 software
  14 Bluetooth Stack for Windows by Toshiba
  15 Bluetooth monitor
  16 TOSHIBA Value Added Package
  17 TOSHIBA Flash Cards Support utility
  TOSHIBA 18 hardware configuration utility
  19 TOSHIBA supervisor password
  20 TOSHIBA SD Memory utilities
  21 TOSHIBA ConfigFree
  22 TOSHIBA Assist
  TOSHIBA Speech System 23
  24 TOSHIBA Extended tiles for Mobility Center Windows V1.01
  TOSHIBA Fingerprint Utility V5.6.0.3221 25

  But the [code] http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&mode=allMachi nes & action = search & teddProduct = 738 & selShortMod = 532 [/ code] I don't know what connection is No2 chipset driver (I use vista 32 bit), similar what link is No3 display driver.

  Can you help me to download 25 entry because I'm bad at computing :(
  Sorry because of my English... THX

  Hey Buddy

  You have a machine with the ATI graphics card. Am I wrong?
  If Yes, then the Chipset driver is ALREADY included in the ATI graphics driver that is available on the European driver Toshiba page!

  The order of installation displays the instructions step by step for all THE portable Satellite A200 PSAE6E but the fact is that devices were equipped with different material parts and that's why some single drivers do not appear or are not available.

  Once again; Utility/driver chipset is available/included in the ATI graphics driver

  Good bye

• Need help with installing Windows 7 32 bit / 64 bit editions

  I have a laptop that originally had Windows 7 home premium 32 bit oem installed on it, I have subsequently upgraded to windows Ultimate edition through update at any time.

  The laptop is retired and I want to install Windows 7 on my new PC but to install the 64-bit versions, but do not have them.

  My question is, should I buy a new copy of windows 764 bit home premium. It is also possible to apply my series of Win7 Ultimate upgrade to an another Windows Installer or it will be related to my original OS install and only the 32-bit version?

  I hope someone can help

  I have a laptop that originally had Windows 7 home premium 32 bit oem installed on it, I have subsequently upgraded to windows Ultimate edition through update at any time.

  The laptop is retired and I want to install Windows 7 on my new PC but to install the 64-bit versions, but do not have them.

  My question is, should I buy a new copy of windows 764 bit home premium.

  No, as long as you have a disc of Windows 7 Home Premium 64-bit, you can use the same product key that was used to activate the copy of 32-bit, you had installed.

  It is also possible to apply my series of Win7 Ultimate upgrade to an another Windows Installer or it will be related to my original OS install and only the 32-bit version?

  If the Express upgrade is planned for the Windows 7 Home Premium to Ultimate upgrade, this computer must also run Home Premium.

  You will need to use the phone for both activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  I hope someone can help

  I do not have 64-bit Windows 7 Home premium, just a 32-bit version OEM

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Need help with the evaluation version of Lightroom CC: the application does not start.

  Hello, I installed the creative cloud and Lightroom CC three days ago (trial version).

  When I try to start Lightroom CC, I get a window with a countdown by saying "28 days left" and at the bottom of this window, there is a "further assessment", click on the button, but when I click on it (to start using Lightroom), nothing happens. I was not able to launch the app for 2 days!

  Thanks for your help.

  Try here. Not sure how relevant it is for you, but the solution that worked for me, and I am also a user of the trial of the new Lightroom running problems...

  Re: Lightroom CC crashes

• Need help with installing Windows

  I recently did a full format my computer and re-installed Windows software.  I can't access the internet then I downloaded the drivers and my flash drive to move them to the computer, that I corrected.  Now internet will not work. It was my first time trying this and I want to just make sure I did everything right.  I do not have the recovery discs and HP does not provide them to my computer as they said that the computer was obsolete.  I'm running an HP Pavilion a310e series.  Help, please.

  If you have problems with the integrated ethernet controller, you must download and install the chipset drivers nForce2 for any operating system you have installed on the PC.

  Specifications of the motherboard you:

  http://support.HP.com/us-en/document/c00006476

  To download and install the driver, go to the section of downloads from nVidia, gnaw legacy and nForce 1/2, select your operating system.

  For XP, it would be here:

  http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

• Need help with installing Linux on Satellite Pro A300

  Hello

  I would like to install Linux on my laptop and am wondering which is the best distribution I can use and is it simple to follow guide to use so I'll get to the top and running with a dual boot with Microsoft Windows Vista?

  Please help because it is really important to me!

  Appreciate your help in advance.

  Thank you
  Bill.

  Hello

  To be honest I didn't install Linux on my laptop with Vista and XP.
  Sometimes, I use Linux Live distribution called Koppix, and I m satisfied!

  The devices have been recognized, and most of the drivers were included.

  Maybe it s an option for you too

  But Ubuntu might also be interesting for you.

  Check this box:
  http://www.Ubuntu.com/