Help with my ME settings for h.264 720 p
Hi all. I really enjoyed to the tail upward exports in ME first, and then the batch code all at once. I do a weekly job where I will have one or two videos dozen finished in a sequence, so I need to put the entry points and and export each of them individually. With my old workflow in Final Cut Pro 7, I had to export each item one at a time. Just has them like ProRes and waited on them, and then took those compressor and I coded them in my final download YouTube format.
With my new workflow, to keep good quality HD, I find that I can not queue for ME with what should be the right setting of h.264 720 p. So, I've been queues to ProRes and then taking these files to compressor for my final output of 720 p. Don't get me wrong, it is still faster than the old way I. But I want to make the tail just my code to ME with settings h.264 720 p in the first place and not make another encoding. So see if you can find something that I did it correctly.
I'll post my ME and compressor settings I used. With compressor, videos come out looking really good. But with ME, it's really muddy. There are a few macroblocking and - I forgot the term for TI - where the gradient on a wall of a light will not have enough depth and a bad image. But the better term for what it looks like is just muddy.
It comes to my Apple Compressor settings that work well for me:
File extension: mov
Planned size: 2.3 GB/hour of source
Audio encoder
AAC, stereo (L, R), 48,000 kHz
Video encoder
Format: QT
Height and width: up to 1280 x 720
Format of the pixels:
By default the cultures: no
Padding: Preserve the source aspect ratio (t 0, l: 0, b: 0, r: 0)
Rate: (100% of the source)
The selected Frame controls:
Registration: (fast)
The closest frame
: Resize filter linear
Deinterlace filter: Fast (on average line)
Adaptive Details: On Antialias: level of details of 0: 0
Field trip: progressive
Type of codec: H.264
Multi-pass: frame, rearrange: on
Sampling: 24
Spatial quality: 50 Min.
Spatial quality: 50
Temporal quality: 50
Min. temporal quality: 50
Average: 5.12 (Mbit/s)
Maximum data rate: 5.12 (Mbit/s)
Fast Start: on
And here is a screenshot of my ME settings that I think should be comparable to the compressor settings.
And here are two examples of videos to watch. To rule out other issues, I first encoded a master ProRes. Then, I took this file and encoded using the settings above for each program. File name shows who is who. Video is 36 seconds, and the files are approximately 22 MB and 16 MB. The file ME encoded is really great, even if it seems worse.
https://drive.Google.com/folderview?ID=0B9g3lbp53ZU6WURFYURjVjN3anc & USP = Sharing
I appreciate really all help on this. I certainly have a workflow that works for me right now, but if I could understand this point, it would save a lot of time for me and be much more effective. Thank you!
SOUL is better and faster than the compressor.
You should be fine to get the right files looking for PP with the option to export H.264.
Tags: Adobe Media Encoder
Similar Questions
-
The speeds are horrible! need help with the best settings.
I can't not significant with my internet speed (less than 1 Mbps in the speed test).
These speeds are intermittent. Sometimes - but rarely - I get much higher speeds I have pay for.
My provider is Time Warner. I have a time capsule tall which is 1 year old. I also have an old flat capsule which is a wireless extension, as well as a newer airport express (flat type) and an airport express that plugs on the (old) wall as extensors as well.
I called Time Warner repeatedly. They have sent people twice and messed around, but the problem persists.
I started think maybe it's time Capsule. (I tried my old mac into the router directly - wiring because it has an ethernet port - but it would not connect).
I don't know a lot about what do all the settings, so I have not messed with a lot (even if I tried to change the renew the DHCP lease for 1 hour instead of 1 day).
Could give me an idea on the best settings for a time used as wireless with extensions Capsule?
Is it possible that my older Extenders slow down things?
Thank you.
It is usually best to start from scratch.
This modem do you have? Brand and model please.
Simply run the TC... measure speeds... by wireless and ethernet and report.
Run the TC and the new express... (much better than GEN 1 or 2... TC equal but gen3 gen4 TC is greater than the express new).
In airport utility watch connection speeds. It shows the speed of connection, if you place your mouse over it.
Slow links will cause worse problems on the line... Make sure that all the repeaters (wireless extensions) get at least good signal...
Please give numbers and the screenshots as it helps no end.
-
Export issues of sequences with the correct settings for DVD
Hi - I'm relatively new at first, but working on a project that is very important for me - for the life of me I can't understand correctly export settings.
I have compiled from home movies of my family in a few sequences for the 60 years of my dad. I worked on these weeks now get cleaned and put all together. In total, it's about 24 hours of footage. These videos have all turned initially on a very old camera video in the 80 and 90 - the kind you actually stuck a VHS tape in. My ultimate goal is to put these or on a DVD (although I guess that's too many images for one), or a drive flash or something of all compiled in one video.
So far, I got error messages on not enough disk space - so I tried breaking the sequences and exported individually as smaller files. But now, when I export those, all videos come out tiny - the video focuses on a much larger screen, do more fit to size. I studied everything about elongation and corresponding parameters and I tried everything. Of course I do not something good, I don't know what.
I tried all different export settings, the settings of the sequence, and I thought I was following with the sequence settings, but I guess I'm not. Although I worked on it for weeks, I am out of time. His birthday was yesterday, and I wanted to give her the finished disc tomorrow. This does not seem possible as I am about to give up!
Someone please help! I would be grateful if someone could guide me through what my sequence settings should be and what my export settings should be and how to get the video output to the correct size for the screen.
I appreciate your help,
Danielle
Time of export will vary widely, depending on at least these factors
1 - your computer... Processor and the amount of RAM, and is this external drive, USB2 and USB3?
2. what you change, and effects that you have applied your 718 x 480 video size... is odd, the usual when scanning a VHS tape is 720 x 480, so your video requires 'some much' extra processing
-
Need help with the port forwarding for a XBox remote Streaming
I have a router R6200v2 and need help with port forwarding.
I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere
http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/
I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.
Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?
Hi @varxtis,
You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.
1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)
2. Select the type of service (TCP, UDP or both)
3 entry 5050 times a start external Port and external endpoints.
4. Select the IP address of your XBOX.
5. Select apply.
6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.
Kind regards
Dexter
The community team
-
Need help with SQL/PL/SQL for Dates
Hi Experts - need help with a SQL query.
I need to insert some date fields in a table called CALENDAR_PERIOD.
Current data in CALENDAR_PERIOD table with their data types:
STARTPERIOD (DATE) YEAR (NUMBER) PERIOD_LABEL (Varchar2 255)
02/11/2014 2014 2014/02/11 SUN
03/11/2014 2014 14/03/11 MON
04/11/2014 2014 11/04/14 MAR
I have to increment above values up to the year 2025. I don't know how to write SQL and increment of these values.
Ex: My next value should insert: 05/11/2015 2014 11/05/14 WED like that I need to insert data until 12 31, 2025.
Can you please help me with PL/SQL block?
Really appreciate your help!
DB version:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Thank you
SandyHello Sandy,
Maybe something like
INSERT INTO calendar_period (startperiod, year, period_label)
SELECT DATE '' 2014-11-04 + LEVEL
, TO_NUMBER (TO_CHAR (DATE '' 2014-11-04 + LEVEL, "YYYY"))
, TO_CHAR (DATE '' 2014-11-04 + LEVEL, "MM/DD/YY DY")
OF the double
CONNECT BY LEVEL<= date="" '2025-12-314="" -="" date="">=>
;
((mais je ne comprends pas pourquoi nous créons une telle table "année" et "period_label" peuvent être calculé à partir de startperiod))
Best regards
Bruno Vroman.
-
HP laptop: need help with internet and search for things
whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request
Yes it's a Windows 10 and it arrived already installed I'll take the other info now
-
Does anyone can help with the display settings on Satellite 4070?
My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
The display settings are gone and continue to go haywire and display a message saying:
There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.I tried to change the display settings but they go back - anyone got any ideas on that?
I know there is a product recovery CD, but naturally enough I don't have that either.
Thank youHello
I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.I think you are using the Win98. Am I wrong?
Then visit Toshiba, download the Trident display driver and install it!Good luck and have a nice day ;)
-
Need help with downloading driver WLAN for Satellite A100 (PSAA9)
Hello!
I should update the drivers for my Satellite A100 (PSAA9) according to the last email received by Toshiba. Check it HERE
However, I am not sure they are the right ones for my Intel(r) PRO/Wireless 3945ABG. The download page includes not 3945ABG, but only Wireless 3945.
Any help? I'll download them anyway? Thank you
Hello
you know that you can use the drivers, because they are for this series of w - lan cards. Moreover, intel drivers for the lan cards are almost the same won´t then you have problems with the installation again. Don t worry, just download and install them, they are the right ones for your machine/w-lan card.
If you have additional questions just ask their...
Welcome them -
Need help with Windows 7 drivers for Radeon HD 7670 m on a preinstalled Windows Pavilion g6-2300sy 8
Hey, I recently bought a HP Pavilion g6-2300sy with Windows preinstalled 8 and decided to install Windows 7 on it instead, as I'm rates more familiar with it. Now I seem to be running into issues with the Radeon HD 7670 m laptop graphics card, since I can't find a driver that works for her. I tried several generic drivers AMD HD 7000 series, but none of them is not working - Windows continues to give the error code 43.
How can I fix without going back to Windows 8? Any help would be really appreciated.
Hello:
For the g6-2300sy, use the W7 x 64 drivers and software for this model:
For the graphics, you install only the AMD graphics driver. Do NOT install the Intel driver. The AMD driver has the graphics for two video cards.
DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES
-
Help with Husqvana transfer 3D for Windows 7 XP
Husqvarna 3d will not be copied in windows 7, you can tell me how I can do this. I want to transfer my embroidery on my Windows 7 and can not. Help!
I've heard XP did put at day end October so need to do very soon.
It is unclear what you mean by "won't copy. If you're having trouble installing the software 3D of Husqvarna on a Windows 7 system, see--> http://www.joeldare.com/wiki/installing_husqavarna_3d_embroidery_on_windows_vista
Download the files directly from the page with instructions, or the following:
Here's where you get the upgrade patch 7.25 and the "patch Vista dongle"--> http://www.vsmsoftware.net/Registration/3D/Updates.htm
And it is the site of "Other useful software" for the "the Hasp dongle driver'--> http://www.husqvarnaviking.com/ko/8588_4197.htm
Also, see--> http://www.secretsof.com/wp/?p=1433 and note that:
If you bought your professional Husqvarna Viking 3D embroidery system after April 1, 2006, you will be entitled to a free upgrade to the Husqvarna Viking 4 d professional embroidery system; Check your details in the VSM software product registration database. Please ensure that the details of your authorized dealer are also correct, as in most of the cases your free update will be delivered to your favorite retailer.
Finally, Windows XP support must end on April 8, in order to have a little more time than the end of October.
-
Need help with the E4200v2 settings
I'm happy to say that my router is running again after getting my RMA. However I have noticed a strange behavior that is the same on the two E4200v2 than i; ve used. On the PC that is connected to the router via LAN, I noticed that whenver he awakens from his sleep that the network connection is listed as disconnected and it takes a minute or two for the PC Restore the connection with the router and internet access to resume. On wireless devices, including a PC connected via PCI-express card 801.11n, is not a problem and they restore their link immediately. Y at - it a network setting that I can change to fix? I don't think there is a problem with the PC's LAN port that my two desktops have exposed this problem when it is connected directly to the router directly.
It could be possible that your PC turns off (your NIC) nic mode "Eve". Turning can take a few minutes.
Try to check the properties of your network card in Device Manager and uncheck the "allow Windows to turn off this device to save power" and see if this helps =).This does seem like a problem of router for me.
-
Help with static IP address for the WRT54GL by EZXS55W
Hi all!
I'm having some trouble network at the office and cannot keep close internet for all the world just try a new mode of connection of the cables.
We recently received a notice on five new static ip addresses for the office, we did turn on DHCP those for a year now.
We have a basic network requiring no credentials of the modem or connection.
At this moment we have a network cable straight from the network on the router (WRT54GL) failure. Then, the router is defined in gateway mode and uses one of our static Ip addresses.
I wanted to connect my server to the same fault, but using the static IP address, so I thought why not do it through a switch.
So the network failure, I ran the right network cable into the uplink on the switch (EZXS55W) connector and then put the router in port 1 and my server port2. Both connected with the right cables.
The Internet light on the router does not light and the switch just flicker light now and then.
Maybe someone here can help me how I should put up to get to the top and running, what do I have to configure something special on the router or maybe somewhere use twisted cables.
Please I need your help!
Thanks for the help and you where once there was something wrong along the way.
I tested my switch before trying this, but apparently it is now broken.
I borrowed another switch of a friend and everything was up and running in a few seconds.
So now I just need to buy a new switch and everything will be fine.
Once agan, thank you... -
Help with a custom calculation for rounding up/down in Adobe Pro
Hello! I've never written a custom calculation, so I'm lost; could someone help me please write one round to high-low a.50/.49 with this field name:
CreditedTotalLocal + OtherHE
For example, if the value of this field, which is the result of the function "value is the sum of the (+) of the following fields" on two fields named CreditedXXXXLocalHE and CreditedOtherHE - between 3.0 and 3.49, this field should be 3.0. If the value is 3.50 to 3.99, the field should show 4.0.
I'm sure it's very simple, but I've tried some things from this and other forums without success. Help, please!
Thanks in advance,
Kim
Instead of using the "field is the sum of the following fields:" or him simplified "Field Notation" you need a custom as a calculation script
function myRound (n, d)
{
/ * By d. P. story
http://Math.uakron.edu/~dpstory/acrotex/elementary/rounding.PDF
*/
n = String(n).replace(/^,$/g,""); "
d =-1 * d
var m = Math.pow(10,d);
n * = m;
n = Math.round (n);
n / m =;
d = ( d > 0 ) ? d: 0;
n = n.toFixed (d);
return n;
}var nResult = this.getField("CreditedXXXXLocalHE").value + this.getField("CreditedOtherHE").value;
Event.Value = myRound (nResult, 0);or
function DoubleRound (nValue, nDec)
{
var nResult = Math.round (value * Math.pow (10, nDec + 1)) / Math.pow (10, nDec + 1);
return Math.round (nResult * Math.pow (10, nDec)) / Math.pow (10, nDec);
}var nResult = this.getField("CreditedXXXXLocalHE").value + this.getField("CreditedOtherHE").value;
Event.Value = DoubleRound (nResult, 0);The above two functions to round the values decimal, myRound use - Dec for the decimal value to be rounded so that the DobuleRound use the positive value for the decimal number or powers of 10 as the 1,000 with the 3 myRound and -3 for DoubleRound.
-
Hi people.
So I have a boatload of pictures that I have to deal with as I'm moving off Ebay and open my own online store and the images that I have on Ebay, although excellent quality are not square, and unfortunately, the model that I use in Wordpress requires square photos.
Basically, what I need is a script that I can use in batch mode, which will focus on the size of the image and change the canvas size to be square corresponding to the current long image side. Resize the image to 1600 square pixels and finally save for web in JPEG quality 60.
Normally I would muddle my way through this trying to teach myself but I already do so much with this new project that I can't afford to pay developers for help that I would really appreciate if someone could help me with this script. I use Photoshop CS4 if it made a difference.
Thanks much for any help you can offer.
See you soon,.
J
A simple gesture can do that. What you need to do is that the action of lot. With the help of Photoshop Image Processor script. The Action is a two-step
N ° 1). File menu > automate > fit Image. In the dialog box Image Fit you assign Width and Height 1600 pixels.
Step 2.) Menu Image > canvas size. In the canvas size dialog box, you assign Width and Height 1600 Pixels.
Record the action in some action with a name like 1600PxSquare
Then use the file menu to Photoshop > Scripts > image processor. In the dialog to the Image Processor script. Select your image source folder. Set where you want your jpeg images. Set it to save jpeg files quality 6. Set it to include your 1600PxSquare action.
Step adjustment image resize your image to fit in a 1600 x 1600 pixels are while keeping image proportions of images. Portrait image will be high 1600px and landscape image will be 1600px wide. The step size canvas will add the canvas to make the place of the image. Portraits will have a border on the left and right images of landscape will be confined to the op and downs.
-
Need help with a query complex for the production database
Hello again,
I need your help once again, for a query how to show me how long each stage of production is by order.
See examples of data and what I expect.
Thank you all for your help.
We use Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
Here the example data tables:
And here's what I expect of my request:CREATE TABLE TABLE_2 ( "ORDER_NR" VARCHAR2 (12) , "PRIORITY" VARCHAR2 (2) , "WO_STEP" VARCHAR2 (1) , "STEP_DATE" DATE ); CREATE TABLE TABLE_1 ( "ORDER_NR" VARCHAR2 (12) PRIMARY KEY , "PRIORITY" VARCHAR2 (2) , "CREATE_DATE" DATE , "ACT_STEP" VARCHAR2 (2) , "STEP_DATE" DATE , "EMPLOYEE" VARCHAR2 (5) , "DESCRIPTION" VARCHAR2 (20) ); INSERT INTO TABLE_1 (ORDER_NR, PRIORITY, CREATE_DATE, ACT_STEP, STEP_DATE, EMPLOYEE, DESCRIPTION) VALUES ('1KKA1T205634', '12', TO_DATE('10-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'), 'U', TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'), 'W0010', 'CLEAN HOUSE'); INSERT INTO TABLE_1 (ORDER_NR, PRIORITY, CREATE_DATE, ACT_STEP, STEP_DATE, EMPLOYEE, DESCRIPTION) VALUES ('1KKA1Z300612', '12', TO_DATE('08-FEB-13 14:00:00','DD-MON-RR HH24:MI:SS'), 'F', TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'), 'K0052', 'REPAIR CAR'); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'A', TO_DATE('12-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', '5', TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'K', TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', '5', TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'K', TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', '5', TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'C', TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'B', TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'E', TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'F', TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'S', TO_DATE('21-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'R', TO_DATE('21-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1T205634', '12', 'U', TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'A', TO_DATE('12-FEB-13 13:52:42','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', '5', TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'K', TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', '5', TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'K', TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', '5', TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'C', TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'B', TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'E', TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS')); INSERT INTO TABLE_2 (ORDER_NR, PRIORITY, WO_STEP, STEP_DATE) VALUES ('1KKA1Z300612', '12', 'F', TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS')); COMMIT;
And now the explanation for the result of the query:SYSDATE 28.Feb.13 14:00 ORDER_NR PRIORITYCREATE_DATE STATUS STATUS_DATE DESCRIPTION AGE_1 AGE_2 WAITNG STEP_A STEP_B STEP_C STEP_5 STEP_K STEP_E STEP_F STEP_S STEP_R 1KKA1T205634 12 10.Feb.13 10:00 U 28.Feb.13 12:00 CLEAN HOUSE 18,083 8,833 2,125 0,833 4,125 0,083 0,750 0,208 2,125 0,666 0,042 7,125 1KKA1Z300612 12 08.Feb.13 14:00 F 20.Feb.13 16:00 REPAIR CAR 20,000 16,042 2,125 0,833 4,125 0,083 0,750 0,208 2,125 0,666
The AGE_1 is the difference in days between the "CREATE_DATE" and if EXSIST L'ETAPE 'U' then STEP_DATE or if the STEP 'U' is not found in TABLE_2 then it should show the difference in days between the "CREATE_DATE' and the 'SYSDATE.
The AGE_2 is the difference in days between the STEP "A" STEP_DATE and IF EXSIST L'ETAPE 'R' then STEP_DATE or if the STEP 'R' is not in TABLE_2 then it should show the difference in days between the "CREATE_DATE' and the 'SYSDATE.
The EXPECTATION is the difference in days between CREATE_DATE and STEP 'A' STEP_DATE
The following columns indicate the days, how long the ORDER_NR remains in these TIMES, if an ORDER_NR comes in the same STEP should be calculated together more than once.
If the ORDER_NR jump a step, it should show a zero in the specific field.
I hope that my explanation is good enough, my English skills are far from good.
Thank you for all your help.
Hosts Reinhard W.Solomon Yakobson says:
Just add the amounts:In fact, you could edit all CASES:
with t2 as ( select t.*, lead(step_date) over(partition by order_nr order by step_date) next_step_date from table_2 t ) select t1.*, nvl( max( case t2.wo_step when 'U' then t2.step_date end ), sysdate ) - t1.create_date age_1, nvl( max( case t2.wo_step when 'R' then t2.step_date end ), sysdate ) - t1.create_date age_2, sum( case when t2.wo_step in ('B','5') then t2.next_step_date - t2.step_date end ) step_b_5, sum( case t2.wo_step when 'C' then t2.next_step_date - t2.step_date end ) step_c, sum( case t2.wo_step when 'K' then t2.next_step_date - t2.step_date end ) step_k, sum( case t2.wo_step when 'E' then t2.next_step_date - t2.step_date end ) step_e, sum( case t2.wo_step when 'F' then t2.next_step_date - t2.step_date end ) step_f, sum( case t2.wo_step when 'S' then t2.next_step_date - t2.step_date end ) step_s, sum( case t2.wo_step when 'R' then t2.next_step_date - t2.step_date end ) step_r from table_1 t1, t2 where t2.order_nr = t1.order_nr group by t1.order_nr, t1.priority, t1.create_date, t1.act_step, t1.step_date, t1.employee, t1.description / ORDER_NR PR CREATE_DA AC STEP_DATE EMPLO DESCRIPTION AGE_1 AGE_2 STEP_B_5 STEP_C STEP_K STEP_E STEP_F STEP_S STEP_R ------------ -- --------- -- --------- ----- ----------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- 1KKA1T205634 12 10-FEB-13 U 28-FEB-13 W0010 CLEAN HOUSE 18.0833333 10.9583333 4.875 .083333333 .208333333 2.125 .666666667 .041666667 7.125 1KKA1Z300612 12 08-FEB-13 F 20-FEB-13 K0052 REPAIR CAR 44.252338 44.252338 4.875 .083333333 .208333333 2.125 SQL>
SY.
Maybe you are looking for
-
internet connection Wi - Fi friends is OK, but after update explorer 8 browser has been cut. Now, he has a good wireless connection to act as a browser interface. If I could download the installer of firefox to a flash drive and copy in his work the
-
Hello I have the source of aglient e5263a counter. But there is no record of labview for her on the Web site. What I find is driver labview for aglient e5270 series. In addition, the e5260 and e5270 series perform a very similar fuction and they shar
-
Made a recovery of the value on 32GB USB Flash Drive Sandisk
Hello I did once defined as I said above, and everything seemed to go well. But my HP Pavilion Windows 8 upgraded to 8.1 is always telling me to complete a recovery set. I know that I can only do this once so I am worried if I start doing it once aga
-
Bad Pool Caller error win8.1 Lenovo ThinkPad2
Since the upgrade to 8.1, I suffered the BSOD bad_pool_caller error. The Tablet originally came with trial of McAfee anti-virus that I removed to replace with ZoneAlarm; Then, I downloaded and ran the program to delete McAfee dll from their site - no
-
HelloI would like to turn minutes unpaid official in fifteen minutes that follow.For example----If the outstanding balance is 0 then output would be 02 minutes would be 1516 minutes would be 30etc.unpaid + (15-mod(unpaidmins,15)) works except when it