Help with PDF hyperlinks

Similar Questions

• Problem with PDF hyperlinks

  Hello

  I have a very weird problem with exporting PDF from InDesign (CS3).

  OK, so I create with InDesign, pages with hyperlinks (text and graphics) and I export them in a PDF format, ensuring that the links "Include" is checked.

  Now hyperlinks in PDF documents work fine.

  My problem comes when I import these PDF files in a new InDesign file and then export again a new PDF (with the "Include links" checked). Hyperlinks in imported PDF files does not work.

  Does anyone know a solution?

  Thank you

  Kina

  Imported in ID PDF files is treated as images. Hyperlinks are not visible in an image. If the hyperlink is a full URL, it may still be active in Acrobat seen because of capabilities in Acrobat and Reader, but it is the choice of the user and may not work for everyone. See here

  http://forums.Adobe.com/thread/725103?TSTART=0

• Help with PDF import Indesign CS5 trial version

  Hello: I'm in a bit of a quandry. I have many PDF files I want to convert it to Epub. I called Adobe and asked them what program I need to do and they said InDesign CS5, so I downloaded the trial version to check it out. The problem is that there is no command to 'place' in the trial version, which is how could import the PDF file. So I'm left unable to perform a test with this software and don't want to buy a program that I can not confirm. Workarounds or ideas would be greatly appreciated. Thank you

  Krista

  No command to place? Check work spaces to make sure that you do not have one that hides the menu items.

  Secondly, I don't see how InDesign is going to be the right tool for this.

  Bob

• Help with PDF download vsn

  Why I can't download this form from the site http://eacea.ec.europa.eu/eforms/index_en.php#1- = Media Project development Eng VSN. The vsn PDF should I have?

  What is your operating system & version?

  What is your web browser?

  How do you download this PDF?

  I have no problem to download that form using Firefox 19.0.2 on Windows 7 by right clicking on the link 'fr', then Save Link as...

• Help with PDF form calculation

  OK, so I don't know if it's even possible, but what I'm wanting is for customers to enter their income in the small "income", and then to the small 'contribution' pre-fill with how they may have contributed...

  If the value is less than $31 920 then it is equal to $1000 - that works

  If the value is more than $61 920 then it is equal to $0, which also works

  If the value is between $31 920 and $61 920 to apply the following formula:

  1000. (0.0333*(Income-31920)) -c' is where I am confused!

  I used the following code which works for the lesser than / more requests... However when I ask him to really take the value in the box and use it to make a calculation, that I have no idea where to start (or even if it is possible) so (as you can probably) I just made up some kind of code that is not working well...

  If (this.getField("income").value < 31920) {}
  event.value = 1000
    } else {}
  if (this.getField("income").value > 61920) {}
  event.value = 0
    } else {}
  event.value = 1000-(0.03333* ((this.getFeild ("income"))-31920))
    }
  }

  Notice to lovers?

  You were very close. Try something like the following in the custom calculation of the calculated field script:

  (function () {}

  Get the value of the field
  var v = getField("income").value;

  If (v< 31920)="">
  Event.Value = 1000;
  return;
  }

  If (v > 61920) {}
  Event.Value = 0;
  return;
  }

  v is > = 31920 and =<>
  Event.Value = 1000 - (0.03333 * (v - 31920));

  })();

• How to get help with conversion ROCK on the export of PDF?

  How can I get help with the quality of the PDF documents converted to word format export.

  Not likely to have, you're doing a "happy dance" but a scanned image is "the ear of the sow" and (Yes, I'll say).

  You can't have a scholarship of silk in one ear of the sow.

  Make you a picture of the text content. You get a result of OCR of all that is recognized. The character by character recognition accuracy is generally quite good. But - No image/photo file actually holds information on format, layout, fonts, etc. - it's just a picture. Acrobat OCR makes some assumptions about all this.

  -You have a bunch of each of the characters being exported to Word. Individual characters, not paragraphs, sentences no, no words, no values "white space", etc.

  So you get an export that is a "best estimate" of the less desirable source. Sometimes, it isn't so bad. Sometimes it's just awful. In all cases, you will need to do some cleanup of the exported content that landed in the Word file.

  The alternative is to transcribe the hardcopy to the Word file.
  In fact it can often be higher as a workflow rather than the scanning-ocr-export-cleanup shuffle

  .

  For really nice export "spot - we ', you must start with a PDF file from an application of creation (not a scanned image) which is a well-formed tag PDF (for example ISO 14289-1, PDF/UA-1).
  The purpose of the tagged PDF document is not only Accessible PDF is also how PDF supports actively the re-use of content (for example, export).

  Be well...

• No support for pse4, don't need help with aid and all the rest. What is a layer? How can I get help PDF from CD? I don't have any idea how to use it. I have a Macbook pro.

  Need help with using pse4 not taken in charge by adobe. How subjects do not available and I have never used something like that. Aide said there is a download but have not been able to do. What is a rookie to do? Y at - it somewhere that I can go to learn how to use PSE4?

  To find out how your problem:

  http://kb2.Adobe.com/CPS/402/kb402107.html

  To get help from the CD files you double-click in the finder, go to PDF help and drag it to the desktop or elsewhere.

• El Capitan Preview Zoom App problem with PDFs

  Hello world

  After the upgrade to Yosemite to El Capitan (10.11.5), I noticed a strange when behavior you zoom in PDFs with Preview.app. Crossing of a certain zoom level obviously breaks the screen refresh. The window turns white, while the text and the images disappear. Also has anyone seen this behavior with Preview.app? Is that what I can do to fix this problem?

  Thanks in advance,

  Kind regards

  Alex

  Hi A_H,

  Welcome to the communities of Apple Support! It is a great place to get help with the issue of zoom that you encounter in the application overview since the update to El Capitan. I will be happy to provide you with suggestions.

  For starters, let's you completely exit the application overview and restart your Mac. Here are instructions on force quit an application:

  Force a nearby application on your Mac.

  The next step would be to restart your Mac in safe mode. The support article title is a bit misleading, but this step is very valid. From your Mac in safe mode will erase some caches, conduct system audits and prevent some elements of the user to open automatically. Here is the information on how to enter safe mode:

  Try safe mode if your Mac does not end commissioning

  If after you restart normally, you always run into questions within the preview, I recommend creating a test user account. This will help isolate if it's a problem specific to the user, either something across the system. You can use the following resource:

  How to test a question in another account on your Mac.

  Have a great day!

• intermittent of the printing problems with PDF files were letters are replaced by symbols radomly

  When printing a PDF file sometimes it works fine sometimes certain letters are replaced by random symbols.  If the printer driver may be corrupted?  It happens not every time.

  Hello

  1. the problem occurs only when printing with PDF files?

  2. What is the brand and model of the printer?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps from the link below and check if it helps.

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  Hope this information is useful.

• I have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send.

  Original title: pdf files

  I am running microsoft windows xp home edition 2002. I always have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send. I use microsoft works Task Launcher 2004 edition.

  Is there an easy way to pass so I can handle pdf files?  Can anyone help?

  Thank you Tim

  Hello

  Please provide us with more specific information on the issue. Your post is a bit confusing.

  If you need to open the PDF files, you will need to install a PDF reader.

  If you try to print in PDF format, you must install Adobe Reader.

  Reference: http://www.adobe.com/downloads/

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• How to integrate an image with a hyperlink in an Outlook e-mail message?

  What is the best way to create an email (in Outlook for Mac) with a (embedded) picture that contains a hyperlink?

  To be clear, I want to embed an image in the message that contains a hyperlink, I don't want to attach a PDF file with a hyperlink. Thank you

  Ask Microsoft... the owner of Outlook

  http://search.Microsoft.com/search.aspx?mkt=en-us&setlang=en-us

• Table of contents trees in sync with the hyperlink navigation

  A requirment for the project that I am working on is to create a process mapping (check) that links to court documents (check, using the hyperlink map).  Everything is good, but the table of contents in the left pane should open/tree on the document which jumped through the hyperlink.  Is there a way to RoboHelp 9 (update tomorrow) to synchronize the table of contents of the opened document?

  Thank you

  Rob

  Hi Rob

  Your car and you say "HTML" is the exit that's like asking what brand of car tell us that it's a car.

  However, did you also say that "it is the exit for the company intranet" so that hopefully narrow down the choices a bit. So I guess here is that it is either WebHelp and FlashHelp helps Web Based AIR.

  I choose WebHelp here. If it's something different, you can come back and tell us, or possibly you will see what I'm showing here in the dialog box and who can help with another type of output.

  

  See the Navigation section of the recipe for the presentation of a single Source.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Help with check boxes and actions

  Hello

  I just downloaded a trial version of LiveCycle Designer ES2 to see if this program works for the company that I work for. I need to create order forms for our products that our customers can fill out online and then send an e-mail to our sales department.

  I have imported our current order form to LiveCycle as a work of art and have inserted check boxes on the form. I want the form to automatically add the price of the option they checked off the retail price of total at the bottom of the form. Do you have any suggestions for me?

  Thank you!

  Stefan

  Hello Stefan,

  LC Designer is a very powerful application. While you can drag and drop objects on the form, for things really move you need to put a script in objects. This allows to control the way in which the form will be according to the users actions.

  To begin with there is help. If you have a look at the Action Builder in the Tools menu, you can select an object, then use the plain instructions accumulates the desired interaction. When you click OK, LC Designer will insert the necessary script.

  Therefore, there may be a steep learning curve, so it depends on how comfortable you are to roll up your sleeves and do some scripts.

  First, you must configure your workspace. This tends to be a personal preference, but here's a basic layout.

  

  It is a bit small, because of the scale, but you get the idea. At any time, you should be able to see the page, the hierarchy and the script editor. The object library and the range of the object and other palette must be close to hand as well.

  I am NOT inclined to import the form existing as work. This can limit the built-in options in LC Designer later. You can save your form existing in JPEG format and then in a new form to use the image object (value size full page) to display the image of the existing form.

  [ALTERNATIVE: you can also add fields to a PDF in Acrobat].

  Regarding scripting, the following JavaScript code should work in the click event of the checkbox (on the ground that the other field is named totalPrice).

  If (this.rawValue == 1)

  {

  totalPrice.rawValue = totalPrice.rawValue + 10;

  }

  on the other

  {

  totalPrice.rawValue = totalPrice.rawValue - 10;

  }

  This should take into account if the user changes of opinion and unticks the box.

  One thing to keep in mind about forms developed in the LC Designer, it is only the functions that will be available in the form (such as submit by e-mail in PDF format) will depend on whether the user has Acrobat or Reader, and also on whether the form has been active player (and how it has been activated). There is more information here: http://assure.ly/gYyYc2.

  I highly recommend JP Terry on LC Designer which is excellent - book "create dynamic with Adobe LiveCycle Designer Forms. It starts at the beginning and clearly sets out the key learning points. In the end, there are a few good examples that you can copy anywhere in your forms.

  We have solutions and blog posts on our website http://www.assuredynamics.com.

  There are also a range of online resources. You can find these resources useful:

  http://www.Adobe.com/go/learn_lc_scriptingBasics

  http://www.Adobe.com/go/learn_lc_scriptingReference

  http://www.Adobe.com/go/learn_lc_formCalc

  http://www.Adobe.com/devnet/LiveCycle/articles/Adobe_XML_Form_Object_M odel_Refer ence.pdf

  http://www.Adobe.com/devnet/Acrobat/PDFs/lc_migrating_acrobat_xmlform. PDF

  And a very convenient resource (and even if it's for version 6, it is still very good because of the way it is presented):http://partners.adobe.com/public/developer/en/tips/CalcScripts.pdf

  The HelpFile in the LC designer can also help with the syntax and LC designer itself comes with some great models and examples.

  Finally, discover the network of the developer on http://www.adobe.com/devnet/livecycle/

  A book that does not deal with the scripts at all, but is very good on the formatting is also ""does this work " by Caroline Jarrett and Gerry Gaffney."

  The Adobe "PDF forms Bible" is OK, but focuses mainly on AcroForms.

  WindJack Solutions have a service on subscription for the scripts and solutions tohttp://www.pdfscripting.com. There a lot of AcroForm script which can be modified according to LC designer and a growing library of LC Designer solutions.

  I hope this helps,

  Niall