Similar Questions

• Need help with activation of the CC training plan

  Hey, I made a purchase order for a comprehensive cloud was created for students and teachers two weeks ago.

  1.5 week ago , made the payment but I do not have any new informations and I still can not use any application.

  Track version was released. CC cannont find my subsrciption associated with my Adobe ID

  Last email that I received said I'll be getting another within 24 hours, still no response.

  Order No. AD001694082EDPL

  Support information can not help with this problem.

  Customer support Adobe please help!

  Hi gregnawrat,

  My apologies for the delay in response.

  I just checked your account and found that you have tried to make the payment by Paypal, Paypal however rejected the transaction.

  Please check with them and place a new order, this order is not yet confirmed.

  I hope this helps!

• Help with authorization of the OAG

  Hello

  I'm looking for authorization of users to the policy after the user ([email protected]) is authenticated using WS - Security Username Token based on the sub condition.

  
  ${authentication.subject.id} [email protected]

  Help please how the above condition be placed in "requirements to attribute" the authorization filter "attribute."

  Thanks in advance,

  Vani

  Hello

  How to allow as you are doing is not a way I would recommend as its not very dynamic. You say everything, that you use a repository as an active area, but generally speaking, you would always check whether the authenticated user is a member in a specific group, rather than maintain a list of users in a comparison filter. You want to avoid having a very own logic in the configurations of the bridge as much as possible, otherwise, you will need to transfer whenever you want to add or remove users, etc.

  If you use a server active directory you can use the filter "extract to the directory server ' after a successful authentication to retrieve the attributes of this user and then normally memberOf that will give you all the specific user groups is a member and on these data, you would do an authorization check.

  If you use the built in the repository of user there are a filter of "Control group" that can be used instead.

  See you soon,.

  Stefan

• Help with fonts on the Web site

  Hi guys,.

  I'm having a little problem with a Web site, the soloution is probably very simple but cant for the life of find out me.

  Welcome to the 1st Winnington Scouts

  Please choose your topic below.

  In my code html above is under the "main" div and css for h1 is calibri fonts and it shows it in dreamweaver. Whenever I use the mode live view, or preview in the browser, or downloaded as it is now the police back to times new roman and color black.

  Below is the link to the site.

  http://winningtonscouts.hostei.com/

  Any help with this would be great

  Solved the problem

  There were some thugs in the stylesheet coding

• help with authorization of the ADE?

  Hello

  I downloaded ON my PC and I need to allow it. Now, my computer asks me if I want to replace the AdobeID by the new. I get confused, because OF is not yet on my computer, but I don't allow my ereader with my AdobeID.

  The question is, if the email address remains the same, but password changes, I will always be able to read the books I already have on the ereader? I bought via the ereader, whereas they were not on my computer before.

  When asking you TO 'replace' means replace the anonymous account which is currently my pc or can I replace what I had before on the ereader as well? Because if I have to replace the AdobeID on my ereader as well, then I won't be able to read ebooks that I put on the ereader.

  Thanks in advance!

  Kind regards

  Denise

  Many people seems to think that the use of Digital Editions with an ereader is

  'plug and play '.  It is not because there is a good amount of technology

  lurking in the background.  No offense, Denise, but I should put a

  view around the answers to your questions.

  EPublications are consistent with the Digital Millennium Copyright Act of 2000 (DMCA

  for short), which sets out the way they are managed.  There are

  restrictions on copying and printing of ebooks and these restrictions may be

  fixed by the authors, distributors and publishers using digital rights management

  (DRM).  At the same time, as Digital Editions library management systems

  need to build these restrictions to their programs.  In addition, ereader

  manufacturers can choose some options to integrate into their equipment.

  Some ereaders can be used without their registration with the manufacturer.

  But their capacities are limited.  Some, like the Kindle and

  iPads/iPods/iPhones, are related to a certain ebookseller (Amazon or Apple).

  All PC library management systems can access ebook sources without being

  recorded.  However, as you have discovered, some will impose limits

  on you if you do not save.

  ADE - registered or not - creates a small file of ID for each ebook and that

  contains information about the user.  So, you are right in saying that, if

  you use a different ID, you won't be able to read ebooks that you

  downloaded with (or without) a different ID.

  Your ereader also contains information on registration - if you are registered

  then the ID you used is embedded in its file ID and is associated

  with all of the ebooks that are downloaded/copied on it.

  All that being said:

  ADE is flexible enough, you've discovered.  You can allow it with a

  ID and then change it when you want.  However, because of the DMCA, it won't

  allow you to read electronic books other than those to this ID.  One solution is

  the other is to set up an Adobe ID which is independent of your email

  address (you can do even if the suggested format is an e-mail

  address) and use it.  If you change your email, you do not assign your

  eBooks.  However, for the moment, whatever ID you use must match

  the one that you used to download the ebooks.

  I can't tell you exactly what to do with your ereader, but the very idea

  apply.  You must register, and using the same ID that you did for ADE

  greatly simplifies things.

  I hope this helps!

  =================

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• Problem with development of the attribute in the OPS

  Dear all,

  I have a requirement while defining an attribute like below.

  I have a table advanced that I'm the filling of data as below:

  lineNum (Column) POINT

  1                         A

  2                         B

  3                         C

  null                      D

  null                     E

  so my requirement is when I press a button, say "Save" he want to check maximum linenum of the VO and need to set other values as the maximum value + 1 null...

  so it should print as so here maximum line number is 3, so I need to set two values 4 and 5 others

  1                  A

  2                  B

  3                  C

  4                  D

  5                  E

  If the table contains data such as

  A null

  Then it should display as

  1A

  I tried using below piece of code

  for (rowi XXDPECONTAINDATAVORowImpl = (XXDPECONTAINDATAVORowImpl) vo2.first ();)

  Rowi! = null;

  Rowi = (XXDPECONTAINDATAVORowImpl) vo2.next ())

  {

  rowi.setAttribute ("linenum", i);

  i ++ ;

  }

  Using this code it contains all the lines of the definition, but I don't need these lines with null value I need to value maximum linenum + 1, please help me it's urgent

  
  

  Thank you

  Deb
  

  Hello

  use code below to find maximum of Linenum first lines and then set the values according to your requirement.

  Number of maxLineNum = new Number (0);

  XXDPECONTAINDATAVOImpl vo2 = getXXDPECONTAINDATAVO1();

  RowSetIterator iter = vo2.createRowSetIterator ("iter");

  for (int i = 0; iter.hasNext (); i ++)

  {

  Rowi XXDPECONTAINDATAVORowImpl = (XXDPECONTAINDATAVORowImpl) iter.next ();

  Consider only the lines where the linenum is not null

  If (null! = rowi.getlinenum () & maxLineNum.intValue ())<>

  {

  maxLineNum = rowi.getlinenum;

  }

  }

  iter.closeRowSetIterator ();

  code to set the number of the line update-

  RowSetIterator iterUpdate = vo2.createRowSetIterator ("iter");

  for (int i = 0; iterUpdate.hasNext (); i ++)

  {

  Rowi XXDPECONTAINDATAVORowImpl = (XXDPECONTAINDATAVORowImpl) iterUpdate.next ();

  Consider only the rows where the linenum is null

  If (null == Rowi.getlinenum ())

  {

  Rowi.setlinenum (maxLineNum);

  maxLineNum = new Number (maxLineNum.intValue () ++);

  }

  }

  iterUpdate.closeRowSetIterator ();

  Thank you

  Kone

• help with formatting of the accidental partition

  I had to re - start my operating system. whem I formatted the drive, I was installing on, I accidentally formatted partitions on one external drive. My question is; is it possible to pull content market back this player. or better yet, restore the partitions on this subject? I have a ton of things in it that I can't replace. any help would be greatly appreciated. and please. keep simple language please. I am a novice at this stuff. Thank you.

  There are 3 third-party programs that should be able to restore partitions or data that were on them. This might work only if you have done a quick format. Quick format just basically says "store data between points A and B", without deleting data that are there, so the data is recoverable. I don't know the names of all the programs, so maybe someone else can help you with that, but I can say until you find a do not do anything with the external hard drive because whatever it is placed on the disk will be overwriting previous data.

• Cannot run the smart calc script

  Hi gurus,
  I recently installed 11 1 2 2 version on my place of work.
  I was using smartview to access the planning Web forms and when we run a script of long calc we get the following error
  
  "Unable to connect to the provider. Make sure that it is running in the specified host and port. Error (12031)"
  
  I use a load balancer to my web applications.
  can you please help to solve the problem.
  
  Thank you
  Praveen.

  It could be that APS stopwatch, I guess you run OSH
  If yes stop OSH, go to \user_projects\\httpConfig\ohs\config\OHS\ohs_component
  change mod_wl_ohs.conf

  Here, you will see something like

  
  SetHandler weblogic-Manager
  WeblogicCluster : 13080
  

  Add

  WLIOTimeoutSecs 3600

  It looks like

  
  SetHandler weblogic-Manager
  WeblogicCluster : 13080
  WLIOTimeoutSecs 3600
  

  Save, start OSH and try again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Help with built-in converter and a script

  Hello-

  I'm looking for a p2v of a script machine import in a virtual every so often.  I know that there is built in new (GUI) to do this, but I'm looking for a script if possible.

  My script which is probably not good is attached.  I run the command of my workstation with the following parameters

  C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Plugins\Converter Ent

  recovery 4.1.1 > converter - tool.exe - vcHost HOST1 - jI TEST.xml

  version 4.1.1 conversion tool build-206170

  P2V of reading file TEST.xml...

  Enter the user name for Host1: username

  Enter the password for Host1: PASSWORD

  Can I get

  P2VError UNKNOWN_METHOD_FAULT (vim.fault.NoPermission)

  conversion tool failed

  I tried username root and password

  I tried my vcenter username and password (which is an admin on the data center in question)

  If I try with the credentials of the command line, that nothing happens

  C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Plugins\Converter Ent

  recovery 4.1.1 > converter - tool.exe - vcHost Host1 - vC name - I TEST.xml

  version 4.1.1 conversion tool build-206170

  P2V of reading file TEST.xml...

  C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Plugins\Converter Ent

  4.1.1 Recovery >

  Research, it seems that I could run a P2V via GUI and XML code will occur.  Is it produces on my workstation or vcenter Server files?

  I imported my workstation in vcenter which went well but I could not find the xml file on my desktop anywhere.  I don't check the vcenter server yet.

  Any help would be great

  Hi Ryansoto,

  Maybe you can find information at this location: http://communities.vmware.com/thread/115185

  Concerning

  Franck

• Can anyone help with removal of the malware virus on the website?

  After update of some elements of the website http://www.gena-interieurbouw.nl it seems that some virus has been activated on the site. A few words in the product text automatic links to malicious software (dating site, site of games?)

  I don't know how to remove this virus and clean the script I ask if there is someone out there who can help me with this problem? I'm not a programmer at all.

  I did state this problem to Adobe with casenr. 183793053. they couldn't help me because it is not a system problem. But I still have the problem.

  Thank you very much in advance.

  Kind regards

  Looks like you have JS files related to this page that look like this-

  Just go to the page or a model they are in and delete them. You can do this via the admin or FTP.

• Help with loops and the fi

  Hi, im quite new to action scripts but the use of pascal a lot. Im stuck with a loop. What I want to happen, is when it gets to a certain range, not stop there and do some things visible on the frame when I press the specific letters on my keyboard. I had:

  Stop();
  {if (Key.isDown (85))}
  Statements
  }

  but I found that it would apply only if I held the button when I walked into the frame.
  I did try using some different loops, but in vain
  any suggestions would help!
  Alex

  Try to use a listener...

  var keyListener:Object = new Object();
  Key.addListener (keyListener);

  function keyDownF() {}
  If (Key.GetCode () == 85) {}
  Statements

  }
  }

  keyListener.onKeyDown = keyDownF;

• Need help with regard to the audit

  Hi all
  Im trying to audit the actions of users who access the database.i.e I get requests from users. In the column sqltext from sys.aud$ table im get entries. But the problem is im not getting queries like
  
  Select employee_id in system.employee; (IE queries containing specific attributes to select)
  
  but it is audit queries like
  
  Select * from system.employee;
  Select count (*) in the system.employee;
  Select count (*) in the system.employee, system.department;
  
  Please help me with this...
  Thanx

  Hello

  As Justin says: maybe you first want to work on the correct schema.
  SYS and SYSTEM schema is not "playgrounds".
  It is strongly deprecated by Oracle to create or modify objects in the schema these.

  Published by: hoek on November 4, 2009 16:34 typo

• Need help with calibration of the battery

  I have a Vn7 - 591 g and it's basically old 1.

  My problem is my laptop stop without noticing low battery notification and without any warning since I updated my windows 10 November pro build.

  First, it would close down to the level of 15% without indication battery and then I looked at here and there and find the calibration procedure as I tried battery as the load calibration procedures to 100% in stop and go in safe mode and let it drain and recharge again, after the fact that now he stops at the level of battery by 30% or 25% without notice or warning.

  I tried battery reset thing pinhole also as suggested somwhere in this discussion.

  One thing I noticed when I put my laptop power in High-Performance option, low battery, that it just goes right into hibernation but when I plug in the AC adapter it shows battery 0% or 1%, and perception.

  so is it problem in my battery or Power Options or the problem is another?

  Any help will be appreciate and please answer quickly because I am sad with this problem. It is a one year old laptop around, I bought new.

  Hello

  Well, the wear level is quite high for a laptop one year old. Do you often use on the farm?

  It is interesting that hwmonitor reads the same amount as that of windows, stop so suddenly, because of the battery not calibrated... I don't think so. It may be the case even if the PCI that controls the battery charging does not correctly read the State. That would mean that you would need to change the battery (the peak is on the battery).

  You can try to run battery Eater: http://www.softpedia.com/get/System/OS-Enhancements/Battery-Eater-Pro.shtml

  This software will monitor your battery while meeting and then make a graph of it after a reboot. I don't remember if trace the graph based on the percentage, or the actual capacity of the battery.

  You can read more about what the software did here:

  http://Lifehacker.com/5657275/battery-Eater-benchmarks-your-batterys-capacity-so-you-know-what-to-ex...

  Also, would probably be a good idea to see if what happens on another operating system as well. For example, you can try to make a USB boot Linux, ubuntu and check if your laptop suddenly stops at the same percentage values. If it is not the case, which is probably something just with windows.

• Bb user new blackBerry Curve 8330 Smartphones help with installation of the Email

  I can't understand this. "I have a new 8330 and when I go into the configuration Email options I have 2 options: I want to use a professional email with Blackberry Enterprise Server account" and I want to ignore the e-mail configuration. Shouldn't there be an option to configure an existing e-mail account? I want my Outlook of Comcast.net email to pass on to my BB, but can't seem to find a way to do it. I have setup a BIS account which seems to be configured correctly. I use Desktop manager 4.6 and Outlook 2007 HELPPpp please... It seems there is no option in Fund Manager to implement. And when I set up the synchronization options, it only shows the calendar (which works)

  To configure your email go to your phone via the Blackberry Internet Service, there are really only two options: 1) the installer of your phone; or (2) the installer through the website of your mobile phone service provider.  From your phone, search for "Setting up Internet E-Mail" icon, select and it will take you through the steps until the establishment of consumer email.  If you don't see this icon, go to main Menu > Options > Advanced Options > host Routing Table, press the menu key to the left of your trackball and select "register now".  Pull your battery, wait a few seconds and pop and then reconnecting, which should automatically start the phone.  If the icon is not there, contact your mobile phone service provider, because it cannot be fully implemented in their system yet.

  If you try to set up the email on the Blackberry Desktop Manager and you see an 'E-mail settings' icon, and then you installed the BES, not the version BIS of the BB Desktop Manager and you will need to uninstall and reinstall the software.  The key is to choose the second option, the installation options that is for BRI.

  I hope that helps!