Help with built-in converter and a script

Similar Questions

• FirePOWER 8130 come with built-in ports and is need of a Management Center?

  Hello

  I'm looking for information for a 8130 HA pair.

  They come with built-in ports or the ports must be ordered in the form of Modules of network?

  Also a management centre needed to handle a 8130 HA pair or not?

  Is FS-VMW-SW-K9 to manage?

  Hello

  You must netmods with the device, which can be ordered with the machine.

  http://www.Cisco.com/c/en/us/products/collateral/security/firepower-8000...

  All modules of firepower including the 8000 series requires center (FMC) of management firepower

  Virtual CMF is good enough to manage it. Material FMC is normally made when there is a lot of sensors and rating that must be stored.

  Rate if helps.

  Yogesh

• Need help with Exchange 2010 Diag and implementation

  I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

  Hello HectorLopez_790,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
  Click here for a link to transfer your question in the forums of Exchange.

  Thank you

  Marilyn

• Help with shortcuts removed/dead and weird Windows Update

  OK, so some time so that I was on vacation, my om used my PC in about 5 min to do something I told him to do. And somehave, when I returned, all the buttons in the start menu under the 'Connect to' or wathever is blocked. Whenever I press them, Windows is opening an empty window. Like all empty them, no text at all. And shortcuts (those in the lower-right corner) died too, all of them.  In addition to the Windows Update, its quite weird. When I open and select 'Install updates' (because I turned off auto update), he did his thing and goes to the classic blue/green start with updated text. And stays there. Can use hours and get back, and it is screwed up and before it resets the fact again. And once again. And once again. Help!

  Kraizer,
  We need to know some info on your system.  What version of level pack Windows\service are you running?  What error codes do you receive?  Questions you have indicated, I would look for in an infection possible virus\malware.  You should take a look at this thread: Mike to get rid of malware – Microsoft answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

  And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

  Hi Alison,.

  You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

  Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

  Let us know if that helps you solve/Rolling back Photoshop.

  ~ Assani

• Help with installation of licenses and proposed

  We are currently using esxi 5 free edition on 1 server with approximately 5 vm running on it.  They are just tested at this stage and are not production machines.  Everything went very well and we want first using computer virtual production on it but will not work them on the free version as we can failover and balancing of load with vmotion.  In addition, since there will be multiple hosts, I guess we want to vcenter server?

  I spent hours looking at all the products and the various licensing options and I cant just to quite wrap my head around what we would want / need.

  Ideally, we would like a minimum of 3 guests (probably 2 active/1 pending), but can go in the future if/when we start to add more guest vm.   It is possible in the future that we begin to implement virtual desktops and we would certainly more hosts in this situation.  We want to centrally manage all of these hosts and virtual machine running on them.  Our servers are dell r610/r710 with 2 physical processors and a minimum of 32 GB of ram.  We already have some servers and some have 2 x 6 carrots and others have 2 x 4 cores.  Most likely, we will add more ram in the future if necessary.

  If we get the version of vsphere which is limited to 3 guests, is it easy to upgrade in the future?  If one exceeds the limitation of vram 192Go is it easy to be upgraded as well past that?  Basically I'm looking for the cheapest license at this time method does not limit me in the future.  Please do not hesitate to ask any questions im just do not know what other information would be needed to provide the best configuration.

  Thank you.

  If you really need to DRS then you would just go with the Enterprise acceleration kit.  It includes 6 processors and vCenter Standard licenses.   You don't have to get the essential kit more and then upgrade.   If you buy only the Enterprise CPU licenses, you will also need to purchase a license of vCenter Server (standard or foundation - Foundation would be limited to 3 guests).

• Need help with an Export-CSV and ForEach loop

  Hi guys, I'm total NOOB in CLI so please forgive the stupid question.

  I need your expert advice for the very large environment and will award points.

  I have a working script that alerts to our logout ESXi hosts, maintenance and NotResponidng mode

  His job well, but need to send a mail to all three of our VCenters

  Current script only works for a VC at a time. How do I ForEach and always the hose of the same body CSV and HTML

  It would be nice to have an HTML and CSV output that looks like this (assuming that there are currently disconnected etc.)

  I have a set of credentials, that work on all 3 of my VC

  VC1

  Host1 disconnected

  Host2 NotResponding

  VC2

  Host3 disconnected

  Host4 NotResponding

  VC3

  No disconnected/maintemance/notresponding hosts for VC3

  Here is my current code, etc. of the hidden passwords >

  # Clear old sessions
  Disconnect VIServer VC01-confirm: $false

  # VC01 VC check for disconnection and Maintenance mode and does not
  SE connect-VIServer-Server VC01 - FakeUSer username-password FakePassword

  $Report = get-VMhost-State disconnected, maintenance, NotResponding | SELECT name, connectionstate

  # scan info to be html and give him a date stamp

  $ReportHtml = $report | ConvertTo-Html | Out-string

  # Write CSV file and give it a character of data

  $filePath = "C:\PS\Output".
  $filename = "VC01disconnectedHosts".
  $CurrentDate = get-Date
  $CurrentDate = $CurrentDate.ToString ('MM-dd-yyyy_hh-mm-ss')

  $Report | Export-Csv "C:\PS\Output\VC_$Currentdate.csv".

  # Send the info by Mail

  Send-MailMessage-to [email protected] - subject VMwareMorningcheckVC01$ CurrentDate '
  SmtpServer - mail.sanlam.co.za - from [email protected] '
  -BodyAsHtml-body $reportHtml - accessories 'C:\PS\Output\VC_$CurrentDate.csv '.

  Thank you in advance for help.

  You could use a ForEach loop through all vCenters and combine the results in a $1 report.

  Something like that

  $vCenters = "VC01","VC02","VC03"
  
  # Clear old sessionsDisconnect-VIServer $vCenters -Confirm:$false
  
  $report = @()# Check VC VC01 for Disconnects and Maintenance mode and Not Respondingforeach($vc in $vCenters){  Connect-VIServer -Server $vc -User FakeUSer -Password FakePassword
  
    $Report += (Get-VMhost -State Disconnected,Maintenance,NotResponding | Select @{N="VC";E={$vc}},name ,connectionstate)  Disconnect-VIServer $vc -Confirm:$false}
  
  # parse info to be html ,and give it date stamp
  
  $ReportHtml = ($report | ConvertTo-Html | out-String)
  
  # Write out CSV file and give it a Data Stamp
  
  $CurrentDate = Get-Date -Format 'MM-dd-yyyy_hh-mm-ss'$filename = "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
  
  $Report | Export-Csv -Path $filename -NoTypeInformation -UseCulture
  
  # Send info with Mail
  
  Send-MailMessage -To [email protected] -Subject VMwareMorningcheck$CurrentDate `-SmtpServer mail.sanlam.co.za -From [email protected] `-BodyAsHtml -Body $reportHtml -Attachments "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
  

  I added the property vCenter for each line in the report

• Help with effects of roll and radio button

  I searched the forum help and google and have not yet found an answer. Somehow I am trying to add a bar of menus with an option to sign up to a mailing list, I built bar and every thing becomes opaque number of specific pixels, however I can not understand how to apply the effect to scroll to the option button. the check mark opacity isn't check-able. If I missed a previous post or some info on this, it would also be a great help to be headed in the right direction.

  You can settle scroll to only button but the form itself. In the fill option, you can apply opacity.

  Thank you

  Sanjit

• Help with application of TLF and a few questions

  Hi guys,.

  I am a newbie with TLF trying to create a desktop gadget the basis for the management of contacts using TLF. Contacts are received from a server.

  TLF is used for the display of contacts.

  
  I encountered some problems. So I need help.
  My layout is as follows
  TextFlow container size is 700 X 600
  Each contact has the following structure

  Each < Div > contains the contact data.

  KWICKS MARKUP XML is as... (but I have not used the XML... I created this in through code using the div, element of paragraph

  and elements span etc)

  
  < DIV >
  < P >
  The USER < SPAN > </span > NAME (TEXT)
  < /P >
  < P >
  IMAGE (Image Online)
  < P >
  < P >
  DESCRIPTION (TEXT) USER < SPAN > </span >
  < /P >
  < / DIV >
  Layout of columns is 2

  Ideally, I want to show 4(can vary) contacts at a time... Please see picture.

  I added contacts to Textflow and set the size of container to 700 X 600 and 2 coulmns.

  Problem:
  Sometimes, when I try to fill in the details for example: If the DESCRIPTION of the USER is too large, the text overflows
  2nd column, and he gets overlaps the first contact in the first column
  example of a link to the image if 4th contact description data are very large.
  whenever the dynamic text is no longer, the text overflows.

  Also, I don't want to use an individual textflow for a contact, because it will be difficult to manage?
  (or would it be easier?)
  Ideally a single stream has several contacts is required.

  Issues related to the:

  1] how to avoid overflows?
  Is there a way to know if the textflow is filled with text, or go over the top?
  Even if I can know whether the following contact data is going to overflow, I can put it on the next page

  [2] is the way to choose individual < DIV > elements .programatically. IE: cross the textflow.
  I want to be able to search for contacts on this basis. Description of user name and the user
  So I want to browse each thr div and move the < P > / < SPAN > text nodes username and userdescription and looking into it.

  [3] also, I want to be able to draw a border around each < DIV > element... thin red border.

  

  
  I had the example of columns by reference.

  Help, please.

  Thanks in advance.

  Amit

  Watch ContainerController.textLength; This gives you the number of characters is made up in this container. Add this value for each controller, subtract from the textFlow.length

  For the first paragraph, try textFlow.getFirstLeaf () .getParagraph (). Then call getNextParagraph() to get those successive. There is no equivalent for DivElements so you need to browse the hierarchy of streams (recursive calls to FlowGroupElement.getChildAt) and use the 'is' operator to check if a child is a DivElement.

  Borders for feed items are not supported natively by TLF. You will need to draw on the container after you determine the positions of the lines corresponding to the compound. BTW, have you looked at the components Flex Gumbo text such as TextArea which are built on top of TLF and are skinnable, so you can easily specify styles such as borders?

• help with the menu button and the film load

  Hi all... I am very new to flash and actionscripting and I am self-taught using mainly Internet searches.
  I'm building a site with a menu and a banner that is controlled by the menu (two swf files). I got to the make contact however, I'm stuck at this point.
  When 'bt_1' is hit I would like to be respected a "mv_1" to load in the banner.swf with intro animation... this I figured out how to... but now when you click on "bt_2" I want to play the rest of the animation of "mv_1" to unload the film before loading "mv_2" with its animation enterance respected... that I would make to several buttons. The method that I use for my local connection is...
  
  Sending script
  mySender = new LocalConnection();
  on (release) {}
  ------each button corresponds to a different setting... 1,2,3,4,5,6
  _root.mySender.send ("menuconnect", "action", 1);
  ------This is the best way that I could understand to disable the buttons appropriate... There might be a better way?
  Home.Enabled = false;
  couple.enabled = true;
  Events.enabled = true;
  Bridal.enabled = true;
  Media.enabled|disabled = true;
  RSVP.enabled = true;
  }
  
  
  
  Script of reception
  
  myReceiver = new LocalConnection();
  myReceiver.action = {function (doThis)}
  If (this == 1)
  gotoAndPlay (2);
  If (this == 2)
  gotoAndPlay (3);
  };
  and so and soforth for all six buttons
  myReceiver.connect ("menuconnect");
  
  If all this makes no sense at all, I'm sorry... I tried my best...
  If some pro out there can understand what I'm trying to do and can help me I would greatly appreciate it... Thank you all
  
  SJS

  I would like to use the ID to link to each of your mv_1, mv_2 etc. in the main stage and control them. This would have the advantage of eliminating the duplication of code and keeping most of your code in one place (image 1 of your _root timeline).

  If mc_1 etc was connection id mc_1ID etc, the other began on a frame labeled "outro" and ended on the last image, you can use:

• Please help with /el capitan iPhoto and iTunes /pet died need photos please

  I'm on an iMac El Capitan 10.11.3 running. I am also running iTunes 12.3.2

  I am also running and the iPhone 6 Plus 9.2.1

  my pet has just died and I would like to put pictures on my iPhone of assorted external hardeives and rebuild an iPhoto library. I also want to access the menus of iTunes.

  Its been beyond frustratiing as Apple has really changed the display and options to iTunes, iPhoto... .the option NOT automatically open iPhoto is no longer there.

  I also can't access the menus at the top of the iTunes page as before.

  MY questions are closely linked.

  1. where and how can I access menu options in iTunes.. terms itunes is just a FULL screen (which is editable?)... impossible to find or to orient the menu in a way that is understandable?

  2. How can I keep iPhoto to open whenever I plug in my iPhone?

  What versions of my above characteristics could help me keep things simple... especially at a time of crucial as now. Thank you and all help is greatly appreciated.

  I want to especially the photos to be easy to put music on my phone... can wait, but I never had so many problems with Apple stuff as today. I realize a large number is defined by the user, but I need help.

• HP 15 - ac043tu: need help with the key feature and WiFi Drivers

  Hi team,

  I try to activate the key feature and WiFi in my new HP 15 - ac043tu laptop.

  I use Windows 7 Ultimate 32 operating system.

  I installed all the drivers available on the site Web of HP (http://support.hp.com/us-en/drivers/selfservice/HP-15-ac000-Notebook-PC-series/7771404/model/8326116... for my product.

  To activate the function key, I installed driver: HP System Event Utility - sp71716, but it doesn't seem to work.

  In Device Manager, network controller shows exclamation as shown below. I tried to install Broadcom and Realtek WLAN drivers, tried to turn on/off, uninstalled/reinstalled drivers referring to other positions, but that did not work.

  

  I also tried to install HP SoftPaq Download Manager, but it did not help. Tool does not show my product described.

  I went through a similar question posted by other members, but failed to get the solution. This question gave me hard times.

  Appreciate your help in this regard.

  Thank you

  Kishan

  Hello:

  You need these drivers wireless and bluetooth driver 64-bit file should have the 32-bit drivers too.

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

  Unfortunately, I can't help you with the next question.  The system of the event utility would be the only software I can think that would have worked.

  You can try the software HP Quick Launch, but I doubt it will work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_112835_1

• NEED HELP WITH SELECTION was GOOD AND good POWER (HP dc7900 Convertible Minitowers) MARKET

  Hello! I have a HP dc7900 in Minitour Convertible with the following specifications:

  Core 2 Quad q9400 2, 66 GHz

  nVidia GeForce GT430 1 GB

  Elpida 2x2gb RAM 800 mhz (I'll add 2 x 2 earlier so I can get 8 GB)

  Card mother HP 3032 h

  Block POWER 365 stock w.

  So I was planning to buy a Radeon HD 7770 (MSI, Palit, or Sapphire) because I have a small budget and this seems to be a good fit, but there's better food, so I was wondering if there are more good, good markets that would be able to manage my PC (with the new gpu, 8 GB of ram and a single PCIe 6-pin). I also have an MS PRO-550 Industrial, ATX in my old PC and I wanted to add, but I just discovered that it is very bad and that there actually 200w (not 550) :/ Any help would be appreciated P.S I found 'used' Corsair CMPSU-400cx and an Antec SU - 430 then how do get?

  I see that your desired card has a minimum 400W power quantity, but I recommend moving more to a 500W or 600W for handling units your other hardware too although a little extra space so you would be upgraded.

  I am very pleased with the PSU Corsair, I recently installed a CX500 in my machine, although in a smaller case, you need good cables.

  I hope this helps.

• help with windows update errors and chkdsk

  I got a message saying I needed to update my windows.  I went to windows update, the express settled.  I received a message that says that I can't install the update to windows.  This is the message I received:

  The website has encountered a problem and cannot display the page you are trying to view. Take the following steps to try to resolve the problem: Refresh the page. In Internet Explorer, delete the temporary Internet files by going to the Tools menu and then Internet Options. Close and then reopen Internet Explorer.

  Then I'm defragmenting my "C" drive and I get an error with the States: Please run chkdsk /f.  I run that, once it goes through the whole process, I will return to defragment and I STILL get the same message.  I don't know how to clear these while I am able to update and to defragment my system.

  Thank you for your help

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

  See also:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

• Need help with copy/move programs and Admin files to other users of the account.

  I created 'connect users of accounts' and 'lost' the original Admin, now I know how to access certain programs and others in shift, click with the right button on connection as an administrator. but can't seem to copy or move some things into "shared folder" can someone help me please? Thanks for any help! No real computer smart right now, but im learning :)

  Hello

  You can also try to connect to the original administrator account by pressing CTRL + ALT + DELETE (all three keys twice at the same time), you will get the classic login prompt. Type the administrator user name and password. You should be able to connect.

  To activate this visible account to the Welcome screen, once logged in click on Start-> Run Type &-> Regedit-> ok.

  Navigate to HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> CurrentVersion-> Winlogon-> SpecialAccounts-> UserList

  Select the username administrator and set the value to 1-> of the close Registry Editor and restart your computer.

  I hope this helps.