help with sync settings

Similar Questions

• Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

  Hello.

  I have windows vista 32 bit home edition.

  Today somehow automatically installed windows ' automatic update agent 747600226

  I always keep my settings to check the updates but let me choose whether to update or install.

  With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

  I would like to help you with these settings to make sure that the update is still as I want.

  Below chose correctly when the new program installed today.  That's how I still want the settings to be:

  Look for updates but let me choose whether to update or install

  Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

  There are four options and a box is in two and I don't know if I should remove the check marks or not.

  Here are the other four options that I need to know how to configure it so that only I have update/install.

  Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

  Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

  Give me updates recommended in the way I receive important updates.

  Option 2: (this is not checked and am not worried about this one)

  Allow all users to use installed on this pc.
  
  Option 3: (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

  Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

  Option #4 (this is not checked, and I am not concerned about this).
  
  See the notification me detailed when new microsoft software is available.

  Thank you very much for your help.

  Take care! :)

  Hello

  The Windows Update automatically updates the updater (himself), regardless of your settings.

  1. Yes it will alert you so you can update or install.

  2. check if you need more of yourself (other users) to be able to select and install the updates.

  3. it will let you know when they become available.

  4. just gives the news of additional details about some of the updates.

  Looks like you're ready for anything you like.

  Rob - bicycle - Mark Twain said it is good.

• Need help with the settings of the firewall for Firefox

  My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

  Hi Tara,

  You can check the link and follow the steps and check if this may help;

  Configure the firewall so that Firefox can access the Internet

  http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

  Is has problems, I suggest you to contact the Mozilla Firefox support,.

  http://support.Mozilla.org/en-us/products/Firefox

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Need help with syncing the iphone

  I am tryng to download music on my iphone to my laptop (windows media player) 5s... I plugged by his charger to the computer but its still not appear as a portable device. Anyone know what could be the problem? or how can I fix this? I appreciate very much all the advice you can give me.

  Thank you very much

  Andy

  I don't have an iPhone of any sort, but see if this - helps http://support.apple.com/kb/TS1538 , esp "Apple Mobile Device" sections. Have you tried iTunes?

  BUT is this relevant - http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/why-wont-my-new-iphone-5s-sync-to-my-widows-7/df341ea0-f909-4bf9-b6e4-064cb59be5e0

• Help with QoS settings

  Hi all

  We put the QoS in the following way.

  The BW is completely booked under these classes and lie unused when there is no traffic under this categoty or QoS comes into picture when the link BW will get overfished?

  Any help is appreciated.

  Premium class
  40% of police
  priority
  set ip dscp ef

  class 1-class business
  percentage of bandwidth 20
  random detection based on dscp
  set ip dscp af31

  class 2-class business
  percentage of bandwidth 20
  random detection based on dscp
  set ip dscp af21

  class 3-class business
  percentage of bandwidth 5
  random detection based on dscp
  set ip dscp af11

  class Management-routing-Class
  percentage of bandwidth 5
  set ip dscp af41

  class class by default
  percentage of bandwidth 10
  random detection based on dscp
  set the default dscp ip

  Kind regards

  Mohit

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any damage that it (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  Police class is active all the time, but the policies only the bandwidth of this class, i.e. the bandwidth use other classes are not always concerned.

• Helps with the rv180w and the Shrew soft vpn

  Hi, I'm trying to establish a vpn connection by using soft shrew for the cisco rv180w router.

  I watch and read everything I could find, but the connection drops during the opening of the tunnel.

  There were a few tuttorial here in the forum, but the links are down.

  I want Edifier is to establish communication and to be able to access my domain on the network.

  Any help with the settings would be greatly apeciated. I am new to vpn.

  Thanks in advance.

  Federico,

  Try to access the following link. It has good instructions for a similar model. The main difference is that the SA500 has double-WAN and the RV180W does not work.

  https://supportforums.Cisco.com/docs/doc-9378#comment-7216

  Here's another tutorial for the RVS4000 that can help:

  https://supportforums.Cisco.com/docs/doc-18443

  Check out the last post in the following thread, which received instructions for the RV220W (should be exactly the same as RV180W)

  https://supportforums.Cisco.com/message/4165652#4165652

  -Marty

• Bug in sync settings w / lens Corrections

  I'm having a problem with "Sync settings" and copy and paste. Even if I * no, * lens Corrections are applied. Of course, I notice only when I try to sync that some develop settings, for example, from a picture taken with a 135 mm with a single blow with a 24 mm - the distortion correction is synchronized, even if I don't him have not checked in the Synchronization dialog box.

  Mac OSX 10.5.8, Lightroom 3 64-bit running.

  Known bug.

  http://forums.Adobe.com/message/2893063#2893063

• Help with Windows XP. Your security settings do not Web sites to use ActiveX controls installed on your computer.

  Original title: help with Windows XP.

  I have a laptop with Windows XP. When I try to go on homepage e-mail he says I have no internet connection, even if I do. Also, I can't run windows update. A pop up as my security settings will not allow active x but don't give me any option to change as I've seen it before. I tried everything I can think of.

  Hi SteveKey,

  ·         You use Internet Explorer to access these sites?

  ·         If so, which version?

  Method 1: Run automated troubleshooting and check if it helps.

  Improve performance and security in Internet Explorer

  Method 2: Check to see if the following is useful.

  a. open Internet Explorer.

  b. Select tools, then Internet Options in the menu at the top of the Internet Explorer window. The Internet Options window opens.

  c. Select security from the list of tabs at the top of the Internet Options window. The Security tab appears.

  d. click on the custom level button. The security settings window opens.

  e. scroll down to download signed ActiveX controls entry and select the quick option.

  f. scroll down to Run ActiveX controls and plugins entry and select the active radio button.

  g. Select the OK button to accept the changes. You may have to restart Internet Explorer for the settings to take effect.

  Method 3: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• sync settings are nowhere lies with the new release of photoshop?

  Help

  Hi superec,

  The sync settings feature has been removed from the latest version of Photoshop.

  Please visit the following link: new analytical features: Photoshop CC 2015 release

  Kind regards

  Tanuj

• I can't synchronize my parameters of color with my colleagues. Sync settings is always grayed out

  Hello. Although I looged in, my color profile have kept and I'm not synced with my co-workers. I tried through PS and InDesign, but the option is grayed out for the sync settings. any ideas?

  Well in that case I advise you to Contact customer services as technical troubleshooting may be required.

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• Help with settings in the capture of a 1968 for the Production of DVD movie

  I have a problem with the Premier Pro and need help.

  I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
  
  My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.

  
  

  The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.

  I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.

  
  

  Here is a picture of what appears on the screen of the Sharp VL - AX1

  
  

  

  
  

  Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)

  
  

  

  
  For any help or suggestion will be appreciated. I have this project done Friday.

  
  

  George

  The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.

  Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• The use of generate for demodulation and modulation PSK sync settings

  Hi I'm trying to generate Parameters.vi of sync allows you to synchronize the flows recovered after demodulation and my input to the block of modualtion streams but I do not know how to work with this block to synchronize the input with the output stream stream. Also would you please let me know what are the modes of synchronization of the input bits and demodulation bit stream. I really appreciate your help

  Thank you

  Hi en99,

  To use 'Synchronization generate MT Parameters.vi' you must wire in what follows on your block diagram:

  • The parameters of the system created in 'System generate MT Parameters.vi' needs must be connected directly to the vi synchronization.
  
  
  • Sync settings must be wired directly to 'MT Demodulate.vi'
  
  
  • The bits of synchronization can be connected to synchronization vi directly at "MT generate Bits.vi.

  What I did is took your 11. VI you downloaded in your post previous and amended to contain synchronization vi. I recorded as a 2010 version.

  I hope this information helps!

  Kind regards