Help with the (Advanced) pen tool

Similar Questions

• Flash line thickness with the line/pen tool

  Hi all

  I'm starting work on an animation project where I'm very straight lines of vector, not something designed by the brush/pencil tool or things like that which are normally used in Flash animations. What I was wondering is, is there a way to transition smoothly between the weight of the line between 2 points?

  For example, I can set A point to a line of 1 weight/weight, then point B a weight of 2 and have thick smooth the transition between two different weights? I can't find a way to change the process of creation, I can't find a way to change it later.

  Thank you.

  HA aman that you don't need that you will find as more complicated for something like that!

  I think your right on with what you do I think that the pen tool is probably your best bet, or if you like to make art in the other tools you can always import it into flash if the creative tools in Illustrator or other better tool works you flash is really good with the import of art as long as you don't need to animate the actual art that might be easier.

• Help with the rate stretch tool

  Whenever I wee the rate stretch tool to increase or decrease, I get some artifacts after export. I tried to check 'allow interlaced processing', but these two options does not seem to help. Artifacts appear when there is a lot of movement, for example shown in the photo with the handshake. Is there a way to get around this, or is there something that I did not not right?

  Frame you are intertwined artifacts.

  Always try to "deinterlacing" in the Options field.

  If his images a camera SD mini dv you will also need to reverse the dominant field.

• Need help with the advanced file Type changes

  Somehow all my folders of changed files option.  Instead of the folder when you click it, it opens the search.

  I know where and what to change, just do not know how.  Under Tools > folder options > file types, I select "files" and click "Advanced".  Of course, it says 'find '.  I click on 'new' under 'action', I type 'open', but what should I put under "Application used to perform action:"?  It won't let me not leave the field empty.  When I looked to see how it was done in 'file', 'edit' is gray.  I tried to look on other computers, but everyone has Vista, Vista doesn't even have a tab "file type" under folder options and I couldn't find it anywhere else.

  Even if you don't know the answer, if you could look to see what it says on your computer and let me know.  Like I said could not find on Vista, I am running XP.

  Yes, I know that I can do a right click on the folder and open it, and that's what I do.  It really happened to be a pain in the you-know-what.

  Any help would be greatly appreciated.

  I've reposted under the topic "Pls! I just need someone to look at their own computer! »

  If you are interested in the solution is there.

• Need help with the path text tool

  How to use the type on path tool without the object that you type on the developing of disappearance?  I can't understand it, someone please help!

  Make a copy and add your copy type.

• Help with the tool pen when moving CS5.1 to CC

  I never use PS, but still did not used to the tool pen in CC, especially when compared to CS5.1.

  I would be eternally grateful if someone could tell me what I'm doing wrong or how do things!

  In CS5.1 I could draw a path with the pen tool, then command-drag on the line between two points to change the shape of the path between these two points. In CC when I ordered-drag path of shape changes but made the way across two points, I am working on.

  In CS5.1 only the length of the handles Bezier control altered, in CC length and angle of the altered control handles, which affects the path I want to change.

  So what I am doing wrong? I use the pen and the path a lot and I'll have to go back to CS5.1 to do any series and complex path works because I can not familiarize themselves with the new CC pen tool. Help!

  Post edited by: Tim Atherton

  Also, with the Direct Selection tool selected see if checking force path by dragging in the options toolbar makes a difference.

  

• Help with the tool pen

  Hey,.

  I'm splitting both handles on a single anchor point in order to make a corner. How to I pull both handles out of sync (just move one at a time).

  Thank you

  Jason

  Hi Jason,

  1. Select the anchor with the direct Selection tool, so that you can see its direction handles.

  2. Select the tool Point Director conversion (part of the pen tools group)

  3. click on the end of one of the direction handles, and then drag a bit.

  

  Direction handles are now "separated" and can be moved individually.

• I need help with the allignment of lines with the pen - CC 2014 Photoshop tool

  Hi guys I have alignment issues. I'm trying to align the lines (pen tool), but there is no possibility to do!

  I have not tried, but I mean when you connect to the last line to make a square, I want to be all straight lines. I'll give your method a go thank you!

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Helps with the rv180w and the Shrew soft vpn

  Hi, I'm trying to establish a vpn connection by using soft shrew for the cisco rv180w router.

  I watch and read everything I could find, but the connection drops during the opening of the tunnel.

  There were a few tuttorial here in the forum, but the links are down.

  I want Edifier is to establish communication and to be able to access my domain on the network.

  Any help with the settings would be greatly apeciated. I am new to vpn.

  Thanks in advance.

  Federico,

  Try to access the following link. It has good instructions for a similar model. The main difference is that the SA500 has double-WAN and the RV180W does not work.

  https://supportforums.Cisco.com/docs/doc-9378#comment-7216

  Here's another tutorial for the RVS4000 that can help:

  https://supportforums.Cisco.com/docs/doc-18443

  Check out the last post in the following thread, which received instructions for the RV220W (should be exactly the same as RV180W)

  https://supportforums.Cisco.com/message/4165652#4165652

  -Marty

• Problem with the Spot Removal Tool

  The last several times I tried to use the removal tool the place, he did not "heal" the area that I asked for it to heal.  He heals an area adjacent to the area I want to heal.

  Any thoughts on the opportunity, it's a LR bug or something is happening with my Macbook?  I would like to address...

  Note that I ALSO encounter this problem with the adjustment Brush tool.

  (I know I can do this sort of editing in PSCC but for simple stuff like this, I usually use LRCC)

  Thanks for your help! LJB.

  IMAGE: miniature horse headshot for a friend

  screenshot 1: weird grass, I would like to change.

  

  screenshot 2: the area I have hi-limited with spot Healing Brush (it's messy but the best I could do while also doing a screen shot and not to release the spot removal tool)

  

  Screenshot 3: the pin code of the area of selection is completely in the wrong place and my strange blade of grass is still there.

  

  Change the Clone in the Heal and vice versa does not move existing pine. You will have to redo the brush stroke after changing between Clone and Heal.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.