Help with the hardware iSCSI initiator help

Similar Questions

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• PCIe ASPM is disabled "by reason of incompatibility with the hardware on this computer"

  My desktop computer running Windows 7 Professional x 64. As far as I can tell, my computer has no trouble mode sleep (S3) and no trouble waking from sleep mode. My power settings work very well, as far as I know.

  Nevertheless, my Windows 7 'Power report' shows the following "error":

  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  In my view, that it is PCIe link state power management.

  Considering that this computer is almost new, with no changes made to the original material, and that Dell is not likely to include material "known incompatibility" in its systems, can I just ignore this "error?

  If there is someone at Microsoft who really knows what the "known incompatibility", they aren't saying.

  After the search the Web site of Microsoft and the Web for an answer and finding none, I came to the conclusion that it is one of these incomprehensible Windows messages that Microsoft is trying to ignore ("...") consult your manufacturer for assistance... ") and nobody else can understand.

  Fortunately for me, my computer goes in and wakes from hybrid sleep without a problem, despite the "known incompatibility" that nobody at Microsoft.

• x 201 (fixed speaker problems! There is no problem with the hardware at least mine)

  Update:

  Well, got my x 201 for a few days and the sound was yet to come on the side LEFT. At the beginning I wasn't planning to install personal programs into it because I know he has speaker problem and Im will replace or repair.

  Now today, I can't wait for the new pilot to be released and I begin to use what I want. I just started with the operating system. The original system was Windows 7 Home premium 32-bit. But since I uninstalled and replace it with a Windows 7 ultimate 32 bit and something happens. The TWO speakers are working. So I guess that there is a problem with the hardware.

  =====================================================================================

  Did someone here Gets the x 201?  I was wondering if there are problems of speaker. I heard a few x 201 speakers has only one sound coming from the left. It should be soon on both sides.

  
  

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• at the level of the ESX iSCSI initiator

  Hey guys,.

  I have a hard time trying to imagine if the iscsi initiators software for vmware esx is a bunch of installable software that I need to download, or TI a bunch of settings that I need the value of the vmnic.

  Please help. If I need to download and install them on the esx host, can you guide me as to where I can find them.

  We run a free version of esx 3.5i, I don't see that would be a problem during the installation or the loading of the iscsi initiators, or would it?

  Thank you

  RJ

  Under adapters for storage in the Control Panel, you should see a SoftwareAdapter iSCSI.  Click it and then click Properties.  This should help you pointed in the right direction.  Under the security profile, you need to activate the customer iSCSI as well.  Otherwise it will be blocked by the firewall.

  Let me know if you need more information.

  Charles nights, VCP

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Clean shutdown for EqualLogic PS6100 without stopping the host/iSCSI initiator

  In fact, I've known the procedure on how to stop the Equallogic PS storage. But I have a question as well as the procedure.

  Do you really need to stop the iSCSI initiator or the host connected to the storage before you shut down the storage controller?

  Because we move the Equallogic box on the rack on the other. I just want to stop the Equallogic without stopping the hosts.

  Hello

  The hosts are connected to some other storage that you want to keep as you move the table EQL?  If you stop the storage, it is similar to pulling on a hard drive in its operation.  Most of the time nothing bad will happen.  But all entries that did not allow the storage is lost.   For applications such as SQL or Exchange is not something you want.

  If you need to keep the server up, stop all applications accessing the volumes, then disconnect all EQL volumes first, and then stop the EQL table.  Will be served waiting for the written word.

  Kind regards

  Don

• SG300-20 with the hardware V03 version?

  Hello

  I am looking for information on a SMB SG300-20 switch with hardware version V03 because I can't find any information on this subject on Cisco's Web site.

  Even the release notes of the firmwares for this family of switches indicate clearly that there are two review of material V01 and V02's mine howevever V03 thus written on the back of the unit PIN VID.

  What are the: number Total of MAC address, total number of assets of VLAN, total number of multicast for this revision of the material groups?

  And the firmware 1.4.0 is also compatible with this revision of the material?

  Can someone gently help me find an answer?

  Thank you very much

  Hello

  Response from the product team: -.

  	Total number Mac Addresses	Total number assets VLANs	Total number multicast Groups
  Sx300 in Firmware 1.4.0 HW VID = 03	46.	4 094	1 K

  Thank you.

  Kay Lee Yiu

  Concentrix at Cisco

  .:|:.:|:. CISCO | Kay Lee Yiu | Pre-sales SMB | [email protected] / * / | Phone + 1 (855) 354-7776

• Windows 7 hangs with the hardware problem, possibly video card

  We currently live hourly breaks down our Windows 7 ultimate (64 bit) desktop system.  Whenever Windows 7 restarts, it informs us that Windows 7 crashed because of a "hardware problem/question.
  We spent the last week using Memtest to test each individual memory stick (8 GB total RAM, 4 individual memory 2 GB sticks), as well as each of the individual memory on the motherboard slots.  Tests total were about 24-36 hours (not all at once, of course.)  Memtest found no errors.
  We are therefore now move to the video card.  Anyway is the same way and diagnostic test the video card (something similar to the test of memory)...?
  Sense, is there any software diagnostic tool that can be downloaded — like Memtest - to test its video card...?
  Thanks in advance for answers!
  * original title - card video problem *.

  Hello

  Utilities usually just video card testing their performance and General compatibility with Windows
  and the programs they are running. For the test that deals specifically with crash, BSOD and other
  questions, it would be best to contact the video card manufacturer support and check with their forums.

  Motherboard (and system manufacturers) also have troubleshooting utilities, if they will help you
  to access it.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  ------------------------------------------------

  Check this thread for J Stuart W response which has some utilities that might help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/random-black-screen-on-Windows-startup/ac0e0e3d-C6A2-4c35-9a69-81cfc446831f

  ------------------------------------------------

  This, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  These utilities can read the Minidump and another error collection files if you need to see what
  in them there. If this BSOD report see the below troubleshooting tool and report those or other issues
  here for further troubleshooting assistance.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ============================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can help with other errors you might find.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a problem with the hardware intitializing.

  Hello

  I have a question about my external hard drive (WD 1024 GB): I see the hard drive under the Manager of hardware, but once I have check the volume here, it says that the disk is not initialized. "If I don't see it under the link"my computer and I can not access the content. " Someone at - it an idea how to solve this problem? Thank you in advance!

  Hello

  You will need access to disk management to initialize the disk.

  1. start > computer (right click, select Manage) > on the left side, select storage > disk management.

  2. once in disk management, you will be asked if you want to make the disk MBR or GPT. Select the MBR.

  3. right click on the black bar of the new drive and select "New Simple Volume".

  4. the wizard should automatically set the default duration of available disk space.

  5 give it a drive letter.

  6 done.

  Kind regards

  Patrick

• OPC servers OR with the hardware OR

  Hi all

  We want to use the latest version of NI OPC (v. 4.27403.1 - U) servers for the collection of data from different sources (cDAQ, WSN) hardware. Has anyone have experience, how does it work? Material is NOT mentioned in the list of drivers NI OPC servers!

  Thanks for your support!

  Frank

  Frank,

  You can set up a virtual DAQmx Global channel for each data source unique cDAQ, and you can use LabVIEW to write an application that runs on the WSN gateway programmable to publish the data received in the variables shared on the network. These two sources of data can be imported into the OPC server from OR.

  To read the DAQmx virtual channels, create a new channel of NOR-OPC data, configure it to use the driver 'OPC DA Client' and select the 'Engine.1 of Instruments.Variable national"on the local computer as OPC server.

  Then add a new device for each of your channels DAQmx (leaving the largest part of the default options clickable at the moment) and when he was asked to select items to import, find and select the global virtual channel DAQmx in the category "National Instruments.Variable Engine.1\System\DAQmx\" and click on "Add >".
  .

  Best regards
  Sebastian

  PS: the new version of NI OPC's NI OPC servers 2010, code internally V4.500.462.0 :-)

• Use of the way of the hardware - iSCSi Netapp 10 Gb Ethernet

  We have a client that wants to connect to storage iSCSi to the ports of the device on their interconnections of the XP of 6140 fabric, because they do not have the Nexus switch and they have too few ports. Is this ok? I know he is not taken in charge by CIsco, but someone at - he tried Taylor or can share their experience?

  Atle,

  You're right, it not there no CVD for this that I am aware.  If you have two paths defined in your strategy of starting within the UCS host will be able to failover to the other track in the event where a fails.

  Robert

• Microsoft iSCSI Initiator with MPIO software

  Use the Microsoft MPIO Software iSCSI initiator installed from an OS supported by VMware guest? Can you tell me analysis that supports this or not?

  Setup would be:

  (1) FAS of NetApp with two Ethernet ports, two IP addresses and two VLANS

  (2) guest operating system (2000, 2003, 2008) with the Microsoft iSCSI initiator installed/enabled and configured for failover or MPIO load balancing

  (3) don't know how to put in place the ESX network, either:

  (i) two physical ESX NIC physical, connected to two different physical switches and two vSwitches, each physical NETWORK adapter on the VLANS separated mentioned in point (1). Guest operating system with two network cards for, each vNIC connected to the separate vSwitches - MPIO configured to load balance/failover.

  (II) active/passive team ESX physical NIC (not the choice here for active/active), connected to a unique vSwitch, both VLAN present at vSwitch. Guest operating system with two network adapters, each vNIC connected to the separate vSwitches - MPIO provisions set up two paths to the storage.

  Other ideas would be appreciated, thanks.

  Hi Tao2,

  Welcome to the forum.

  NetApp site information: "MPIO is not supported in a guest OS." ( http://now.netapp.com/NOW/knowledge/docs/snapdrive/relsnap62/html/software/admin/GUID-5341E2D6-4BFD-41E1-8AAE-0D643D2596EC.html ).

  Most of the time, we ensure the redundancy of storage iSCSI network through the VMware network design:

  • a vNic dedicated for storing the virtual machine

  • vNic attached to a vSwitch with two physical in failover mode maps

  It may be useful

  Concerning

  Franck

• Where and how to get the downgraded version iSCSI initiator?

  Is there a place for older versions of the microsoft iSCSI initiator?

  We are trying to install a piece of legacy equipment and the last confirmed the version that has been tested is V1.05a

  Kind regards

  Drew

  Hi Brainojack

   

  Please refer to the below provided links and check if the provided versions help you. -

  http://www.Microsoft.com/windowsserver2003/technologies/storage/iSCSI/default.mspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=12cb3c1a-15d6-4585-b385-befd1319f825&displaylang=en

   

  But it does not seem you can get versions older than those set forth above. So I suggest you use your favorite search engine search for third party links that can provide you the version you need.

  
  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• CAN grasp the material master Timebase rate returns an error with new hardware OR XNET

  Hi all

  I have a project that communicates on a CAN bus. It has always worked well with a PCI-CAN/2 card, but when I tried to use it in combination with an NI PCI-8512 (NOR-XNET) newly purchased card, it returns the following error:

  "1074388560 error has occurred CAN set material master Timebase Rate.vi

  NI-CAN: (Hex0xBFF621B0) the specified feature has a drawing or model under the NI_CAN which can be made compatible with the hardware, NI - XNET CAN. »

  Yes, I have installed the NOR-XNET for NI-CAN compatibility library.

  The error occurs during the initialization of the RTSI connections for synchronization, that VI is attached.

  I guess that this code is based on an example found in LabView.

  When I remove the BOX: block Set (material master time base rate) property, there is no error and the rest of the application seems to work very well.

  Can someone explain what is / was some timebase setting the internal clock of 10 MHz before connecting a RTSI line for her?

  Are there side effects caused by the elimination of this step?

  Should I still include if I run the application in combination with the old card PCI-CAN/2?

  Thanks in advance.

  Hello Pianne,

  Based on our discussion in class, it seems indeed as part of your existing code is written in a very specific way which is not entirely compatible with the XNET approach.

  Indeed, it would be useful to have 2 separate versions of this init VI (and other CAN-code) of your code and allow you to decide which one to run your top-level application, depending on the setting used.
  A HAL as approach could still be used in this case.