help with the problem of font size on PSE7

Similar Questions

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Problem with the change of font size in a legend

  With the help of Acrobot X Pro: when you use drawing annotations and add text in a caption box, how can I change the size of the font of the text in the caption box? Anyone know?

  Double-click inside the legend (so that you can select the text).

  Press CTRL + E (this will open the PROPERTIES bar).

  The PROPERTIES bar can be turned on in the menus by: VIEW-> SHOW / HIDE-> ITEMS-> PROPERTIES BAR TOOLBAR.

  Here, you can change ANY aspect of the fonts in the legends.

  I haven't figured out yet how to make my changes to the DEFAULT value for the outgoing call.  I'm still working on that!

• Please help with the problem of Validation

  Recent changes: Yes, had to replace the hard drive of my laptop (I had three years and more)

  When error: when I copy the code returned by the validation tool

  What tool: GenuineCheck.exe (downloaded from http://www.microsoft.com/en-us/download/exe-validation.aspx)

  Windows Update stopped working, too.

  You will appreciate the help.

  RP3456

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/validation-tool-gave-me-this-answer/e51e7172-5bc8-42AE-AAB5-7f3c2fc0a166#LastReply

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• In Windows Live Movie Maker, how to make a subtitle with the inner different font sizes?

  How to make a subtitle with different font sizes, as in the old Windows Movie Maker?

  I want to produce an effect video, like MTV clips that fade in and out for video (not before or after the video). It of about what I want to produce and could not because the new WLMM seems to have this deleted title feature.

  My song (large)
  Composer (small fonts)

  I want that this block of text fade in and out for my video. Is there a way to do this? Otherwise I would feel obliged to go back to the old WMM.

  FWIW... going back to an older version of Movie Maker
  Maybe the answer. You need to restart your
  because the Live Movie Maker WLMP project project files
  would be not compatible.

  No guarantee but the next for an installable download
  version of Vista Movie Maker 6 may be worth a try

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Also, Movie Maker 2.6 will work on Windows 7:

  Windows Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)

• pls help with the problem of player

  Hello

  I posted last week, I couldn't open pdf after update of the player.

  After having followed the advice that I received, I uninstalled and reinstalled, accepted the agreement of the user, searched and not found the eula file.  Finally I managed to open the pdf files, however drive either now hangs completely or the blue circle shows updated continuously propagated.

  It appears that there are major problems with the update or I'm doing something completely wrong.

  could someone please suggest a way to solve this problem or a way to get back to my previous version that worked?

  Thank you very much in advance for any help.

  Kind regards

  Andy

  Three things to try - which some have already been given to you in message your last week...

  1. Using Windows Explorer navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement
  2. You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
  3. It might even be a malware problem; See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

• Need help with the problem of the form

  I created a web site in a test directory on my domain. It includes 3 forms. all forms work properly.

  I moved the site to a new domain. I have everything flies with filezilla and everything looks good except for the forms. All of them display an error at the top of the page. The message is about the field of the captcha Image verification

  You can see the problem here;

  http://www.telluridegravityworks.com/contact.php

  and here:

  http://www.telluridegravityworks.com/winter-rental-Form1.php

  I used a product called FORMfields for this. I was abel to create what was needed but found a little hard to use FORMfileds. In addition, they do not answer your questions and provide no support at all. I'm stuck out of these forms and need to do their job. I have re-uploaded everything and did everything I could think just shoot this but I can't seem to understand.

  FORMfileds assistance:

  • Configure your facility by filling out the form at http://www.yourdomain.com/FormFields/config.php .
  • Test your installation by going to http://www.yourdomain.com/FormFields/examples/paths/contact_us1.php . You should see a form contact us with fields for the user name, subject and the Message of

  I get the error checking of the Image on the page config.php.

  The "test your installation by going to . http://www.telluridegravityworks.com/FormFields/examples/paths/contact_us1.php . ' load and display correctly. .

  Can anyone offer advice or suggestions on why I am now hhaving this error on 3 forms?

  Thanks in advance for any help.

  Thread moved to the Dreamweaver application development forum, which deals with PHP and other issues aside server.

  markf12 wrote:

  I moved the site to a new domain. I have everything flies with filezilla and everything looks good except for the forms. All of them display an error at the top of the page.

  Here's the first messages of two error on the first page point you to that:

  Warning: session_start() [Function.session - start]:

  Open (/ home/users/web/898/moo.telluridegravitywork/cgi-bin/tmp, /sess_3a796794467996fdecff8703c5826cf1, O_RDWR) failed: no such file or directory (2) in php/hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField on line 52
  
  
  
  Warning: session_start() [Function.session - start]: Cannot send session cookie - headers already sent by (output started/hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField. php:52) in / hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField. php on line 52

  The first message tells you it can't open a file or a directory and gives the name of the file it is trying to open. The second message tells you that the headers have already been sent, and it tells you where production started.

  Read the two locations, and there's a possible clue to the problem. Your script is looking for a temporary on/home/users/web/898 file, while your script is on/hermes/web01/b898.

  Without knowing more about the script you use, it is impossible to solve a problem on the server side. But it seems you need to do something to correct the location of your script uses to store temporary files.

• other elements with the change of font size to scale

  I do comics.

  Ive done a lot of work on this book

  and publishers want to take the size of the police up to a point. between a 5 and a 6.

  is it possible to change my font size and have the word balloons that are around them to scale too with it.

  Im trying to avoid having every thing of legends to the word balloons to eyball scale...

  Let me know.

  Thanks in advance

  angeltreads,

  If I understand correctly, in the right way, you can simply:

  (1) select what you wish to grow together;

  (2) in the palette/Panel transformation multiply by 1.2 (6/5, just add * 1.2) in the W or H Ctrl/CmdEnter area (to keep prportions).

• help with the problem

  I have two queries that need a feeding table. The problem is that is not having correctly and I can't for the life of understand me how to do this and so any help on this would be greatly appreciated. I tried two different scenarios to get to disposal properly, but I just don't get it.
  
  Here are the two I tried.
  
  First of all, I use two queries, the first gathering of the main information and the second are the comments associated with the data in the first. I tried a basic table layout and the positions of data to the table, but incorrectly. See the link: http://www.hmsims.net/hms/story.cfm
  
  I had to hardcode the comments online to make available to the way I would like that there. So it also does not work as it should.
  
  Second, I used one of the queries to retrieve data from all the tables needed to display. See the link: http://www.hmsims.net/hms/story2.cfm
  
  The problem is that the contract # 6755 VBC has two comments. I only need the data line to show once with all the comments below, and it replicates the data line twice with each comment separately on individual lines.
  
  

  Thank you very much. Worked perfectly.

• Need your help with the problem of SWF file swapping

  Hello
  
  I have two SWF Flash files I want to download in the same HTML file. But I would like to load only one at the time and would like to have a button on each Flash SWF file that causes the other SWF to load.
  
  Hmmm... I don't know if I managed to make sense. (: o) I would like to try it once more. (: o) I would like to exchange a SWF file to another SWF file by clicking on the buttons that are placed on the SWF files! : o).
  
  I was wondering if it is possible, or should I think of another way to work around this problem of mine.
  
  Thank you very much for your help and have a great day.
  
  See you soon,.
  
  Babak

  Khoramdin wrote:
  > Hello,
  >
  > I have two SWF Flash files I want to download in the same
  > HTML file. But I would like to load only one at a time and would
  > like to have a button on each Flash SWF file that causes the other SWF to be
  > load.
  >
  > hmmm... I don't know if I managed to make sense. (: o) I would try one more
  > times. (: o) I would like to exchange a SWF file to another SWF file by clicking
  > on the buttons that are placed on the SWF files! : o).

  make a swf as a holder. call the main.fla file main.swf.
  Embed this file in your html document. This button in place of the file with the
  the following measures:

  on (release) {}
  loadMovieNum ("second.swf", 1);
  }

  in this file have a button with the action to load the 3rd file:

  on (release) {}
  loadMovieNum ("3rd.swf", 1);
  }

  by charging them at the same level (1), they replace each other.
  Pretty simple... uh?

  --
  Concerning

  Urami

  --

  Happy new year guys - all the best there is in the 2006 :)

  
  http://www.Flashfugitive.com
  

  
  http://www.Firefox.com
  

• Help with the problem of data type...

  Hi friends,
  
  I have a requirement. I have a warrant 2 guests (from and to). The data contained in the guests are like "Fall 2006", "spring 2006", "full of 2006", "Academic 2006"for a given year. " I have data from the year 2000 to 2008. The data type of the column duration in varchar. I have a report corresponding to this prompt. This report works well if it is not linked with the guests. If I have this tie with guests, its giving me results because in the report I gave filter as term is greater than or equal to ' fisrt_pv "(où first_pv est la variable de présentation j'ai utilisé pour mon d'invite de terme... comme second_pv sage est pour à terme rapide) and the term is less than or equal to"second_pv"."» So, if I put my guest (and) fall 2007 and (spring 2008 to) and run the report, its sends a fall 2007, Full 2000... Full2008, spring 2000... Spring 2008. It is because it is comparing the term based on letter of departure with all the other term. We know that the fall 2007 and spring 2008 are next to next semesters, is expected to see just a 2-column output. How do oracle know that?
  
  I have a term_number associated with this table numbered 1 to the spring of 2000, 2 Full, 3 for autumn 2000 2000, 4 for academic 2000... all the way up to academic 2008. I used this area to the command prompt to order because I want the guest to show as the spring of 2000, Full 2000, fall 2000 etc. instead of 2000 academic, University 2001... hope this field will be useful for you to analyze... I need your help to do this... If you need other info let me know... Thanks for your time n help...
  
  Kind regards...

  Yes. The problem is that your guests are CHAR, so the calculation "superior to" is done alphabetically rather than numerically. This digital keys.

  Create two columns to contain the term_number that match the values selected in your guests. Then the BETWEEN operator do not filter on numeric values. You can still view the CHAR values in your report, but now they will be in the range that you would expect.

• Please help with the problem of deployment OTA

  Hello

  I'm trying to deploy my application (for the first time) using a live approach.

  First of all, let me mention that I developed this application using the BB for Eclipse plugin.  It generated files jad and cod.

  I have 5 files of cod and jad for the application, all in a directory on a web server. Apache has been set with the necessary MIME types for jad and cod files.  When I use the browser on the BB to access the jad file, your browser correctly displays the name, Version, vendor, etc. of my application.  But then he said:

  This application requires the following modules, which are not installed:
  {followed by a list of my other 4 modules}

  This is obviously a true statement, but I thought that the jad would cause the BB get these other modules and install them automatically.  It would really suck if my customers had to manually install each of the 5 modules.

  It is therefore possible for the other 4 modules loading is automatic, and how I have to happen?

  Moreover, my OS is 4.2 and my application is written for this OS.

  Thank you
  Paul

  See if this helps:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25327&query.ID=11...

• Help with the problem of understanding ip address

  Hello

  Can anyone help me please with this. I grabbed the following to my pix 515e worm (6.2):

  IP address dmz xxx.xxx.210.72 255.255.255.248

  But I got the following response:

  IP and subnet mask can be an invalid pair

  I don't see why this is here. Can someone please explain it to me. I don't see anything wrong with the ip address and the subnet.

  Thank you

  Dan

  Amigo, solve, it's very simple: (courses of subnetting recalled CCNA)

  your subnet mask is 255.255.255.192 (26 decimal)

  The interesting octet in mask is so--> 192

  and--> 64 is interesting byte of the address

  (1) find the magic number, having subtracted:

  256 interesting byte mask-> 256-192 = 64

  (2) find a Multiple of magic number (here: 64) that is less than or equal to interestzing byte of address (also 64).

  Then first Multiple of 64 = 64,

  Then start your work 64 subnets

  1 subnet 255.255.255.64.

  -> Add 64 to find the following subnets: always<>

  2nd 255.255.255.128 subnet

  3rd 255.255.255.192 subnet

  IF YOUR AVAILABLE in 1 subnet IP ADDRESSES are: xxx.xxx.210.65 to: xxx.xxx.210.126

  Don't forget xxx.xxx.210.64 and xxx.xxx.210.127 are not allowed as an IP address (subnet number and dissemination)

  Now, if you want subnets with 8 welcomes everyone, then you solve (2 ^ y - 2 = 8) or (2 ^ y = 10)

  You'll have y = 4

  (because 2 ^ 4 = 16 and 2 ^ 3 = 8 which is unsuffisant)

  Therefore, book 4 bits for subnetting.

  So, your subnet mask is 32-4 = 28 decimal places

  Which means that it is 255.255.255.240

  240 = 128 + 64 + 32 + 16 (2 ^ 7 2 ^ 6 + 2 ^ 5 + 2 ^ 4)

  To find the Ip addresses available for 28, same reasoning as above (the magic number is 16 here)

  For example, they are xxx.xxx.210.65 to xxx.xxx.210.78

  xxx.xxx.210.79 is not allowed (emission) and in

  this case you have 14 addresses available

• Help with the problem of event possible mouseEvent/keyboard

  Hi guys, I have problems with a game I've created now.  The problem seems to lie on the mouse / keyboard event.
  
  Basically I have a character that the player can control using the arrow keys on the keyboard and it works perfectly well on its own.  Whenever the game begins, the player can control the character instantly with the keyboard. Here's the problem now, after that I added another page (in box 1) and created a game start button, keyboard events does not start immediately more.  The player must click on the stage before it works.  Is there a method to solve this problem?
  
  At the present time, here is my page of the Start button.
  
  var start_btn:Start_btn = new Start_btn;
  start_btn.addEventListener (MouseEvent.CLICK, goGame);
  
  function goGame(event:MouseEvent) {}
  gotoAndStop ("game"); The game framework
  this.removeEventListener (MouseEvent.CLICK, goGame);
  }
  
  Here is a code for the actual game part.
  
  stage.addEventListener (KeyboardEvent.KEY_DOWN, keyP resurrected);
  
  function keyPressed (e:KeyboardEvent): void {}
  Code of character... like charcter.x ++ movement, x - etc.
  }
  
  Thanks in advance

  How about you try:

  internship. Focus = stage;

  in goGame().

• Can someone help with the problems of storage for photoshop cc

  Hello

  Ive recently bought a new mac and have downloaded photoshop top. When I open the program and work on A2 size pages for my portfolio my storage used on my mac goes 92 GB free for only 12-8 GB free, what I read photoshop uses temporary when editing files (I don't know if that's okay) and so use temporary RAM.

  Is there anyway to stop that I sometimes get a message saying my storage scratch is full and I can do is no longer any work, please could someone with more experience let me know if there is a way to solve this problem, or if I simply have to share my new laptop for one that allows me to have more storage RAM.

  Thank you!

  In the screenshot below I've implemented an A2 document for printing.

  The size of the file is 99.6 MB, and the pixel dimensions are 4961 x 7016, which should work without problem.

  If you have several layers the file size, but it must always be easy to manage.