Help with the removal of unnecessary shadows of Ambient Occlusion

Similar Questions

• Helps with the removal of the picture of someone

  I'm fairly new to photoshop and I am familiar with the removal of the items/content aware. In the link im trying to remove the person with the hat on and whats difficulty flying over to give the impression that the water is. Especially if the difficulty to remove the lower part of the guy between her arms and keep water and plants there.

  http://i.imgur.com/Ol4NQ2J.jpg

  So my question would be what is the way most own pro of the person and to now look like water and weeds are still there? Thanks for the help.

  Thanks Cadogan, I'm glad you like the results. Here are some images that might help:

  

  It was the plane, I did inside the vanishing point, the idea is to ignore everything else and just try to focus on the perspective of the river. If your aircraft becomes red or yellow, you have an invalid plan this vanishing point can't really understand. play with the settings until you get a blue plane. Once the plane looks good, click ok to exit the vanishing point.

  Create a new layer and return to the point of escape, clone stamp, a little water in the upper right area, until you get something like this:

  

  as you can see I'm riding his arms a lot and clean up unwanted parts later by loading the mask. play with the levels to lighten some water, and it should marry very well.

  Finally, add a new layer for Clone Stamp weeds, it was general areas, I used:

  

  Please post again if you have any questions, have fun!

• Need help with the removal of Trojan.win32.playdun.A

  I have Trojan active on windows 7, MSE captures the Trojan horse, I click to remove all to see when I scan again, he appears once again, he comes up with the name Trojan.win32.playdun.A, serious, he drives me crazy, as it has been picked up 4 times with 4 scans, any help would be appreciated.

  Only a shot wild, I really don't know, but try:

  Update your MSE FRONT a new analysis. When update is complete, Disconnect your internet connection of the computer. After the update, just turn off the power to your router. Scanner not connected to internet...

  When the scanning is finished, analysis still, and if his statements, try Malware Bytes Antimalware, the one free, if you do not already have this, for 0, get it here: https://www.malwarebytes.org/mwb-download/ of course, go on the net again - He - he! :-) During the installation of Anti-Malware, remember to uncheck the "Get free Trial»

  1. Turn off your computer.
  2. Turn on your router - wait that the lamp flashes and lightning as they normally...
  3. When it flashes and lightning normally, turn on your computer...

  If you turn off your computer before you turn on the router, it can be difficult to get it online again.

• Need help with the removal of the media files on my personal computer

  I downloaded a media file and try to delete but asking special permission on my own computer and he repeats to me try again. I need help to remove this media file. Thank you very much

  You could try renaming the file, including the extension and then delete. Which can sometimes do the trick.
  If not, what type of file is and what about size? And logged as administrator?

• Need help with the removal of a document. Ask if I want to delete, click Yes, but will not remove.

  I have a photosmart 4580 printer. When a document has been interrupted for some reason, I can't delete it. Other ducuments can be deleted, but this one remains. Can't print other documents until it is removed, but I can't remove. Help please

  Hello
   
  In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
   
  Restart the computer and you should find that the documents have been deleted.

  Kind regards
   
  DP - K

• I need help with the removal of "all records associated with my domain name.

  Hello

  I have some problemsthe same exact problem like Daren... set up my site to go live. Here's what I've done so far:

  (1) built the site and pushed it live

  2) updated the site

  (3) put in place a GoDaddy domain name

  (4) set up servers on GoDaddy

  (5) put in place the account information associated with British Colombia

  And then... nothing.

  I then removed from the area and tried to repeat the process, in case I missed something, but now I can not put in place a new area and get the error "field already exists. Please delete all the records associated with this area. What records? What does this even mean?

  Anyone can guide me please you through the steps to get this live site?

  Thank you!

  Alex

  The field works on my end.

  It just a delay which should get fixed in a few hours.

  Give it some time and check again.

  Thank you

  Sanjit

• Help with the removal of trial Extended CS6

  I had installed CS6 as it became available, works correctly.  Recently, I installed a new motherboard and processor.  All programs work correctly except my CS6 installation, now opens as a trial of Extended CS6.

  Disabling the feature is grayed out in the menu help, and that the trial of Extended CS6 does not appear as an installed program I can't uninstall to reinstall my CS6.

  How can I uninstall the trial extended, in fact, I've never installed.

  Roger

  SOLVED!

  After an online discussion of 30 minutes with technical support told me that the problem is too complicated and that I would have to ring another number when experts opened Monday.

  I deleted the CS5 and CS6 folder C:\programs files and represented vacuuming.

  Re-installed CS5 and activated then re-installed CS6.  The installer suggested the wrong serial number for CS6 initially, but when I corrected that the program installed correctly and now appears correctly.

  Confusing because I have never used a trial version of CS5 or 6.

• Help with the removal of the pixels of color to Bw Images with a grain filter

  Hi, what is the best way to remove color pixles to convert images p.c. with a grain filter?

  You say that the grain filter is presenting the color noise in an earlier B & W image?  This filter Grain has a monochromatic setting?  Or just add a B & W adjustment layer.

• Help with the removal of trial CS6 and install CS5.5

  I had the Trial Version now complete CS6 and bought a CS5.5 Design Premium.  I have to completely remove the trial before installation?  If so, how?

  No need, but feel free to do so. Run the Creative Suite cleanup tool after uninstalling just to be sure...

  Mylenium

• Problems with the removal of password for stsrting upward

  problems with the removal of password

  Hello

  We can not help you with passwords in BIOS.

  You will need to contact the manufacturer.

  @@@@@@@@@@@@@@@@@@@@

  If it is the password of the user account, read this:

  "How to delete or change a password for a user account in Vista"

  http://www.Vistax64.com/tutorials/101986-user-account-remove-password.html

  See you soon.

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• need help with the Update statement

  Hello
  I received a question in a course and I tried my best to respond, and now my brain is giving. I would really appreciate help with the update statement. I don't mind if you do not validate a solution, a little nudge in the right direction would be really useful. I'll post that I got.
  
  THE QUESTION
  / * For these agents disabled on more than seven missions, change their date of deactivation of the first date of deactivation of all the agents that have been activated in the same year as the agent that you update currently.
  */
  
  I have it divided into parts, here is my select statement to agents disabled on more than 7 missions, which produces the deactivation_dates in the agents table that I want to update...

  SELECT
  s.deactivation_date
  FROM
  (
  SELECT
  a.deactivation_date,
  count(m.mission_id) as nomissions
  FROM
  agents a
  INNER JOIN
  missions_agents m
  on
  a.agent_id=m.agent_id
  GROUP BY
  a.deactivation_date
  ) s
  WHERE
  s.nomissions>7 AND s.deactivation_date IS NOT NULL

  .. .and the code for the first date of deactivation for each year of activation agent

  select 
  a2.deactivation_date
  from
  agents a2
  where a2.deactivation_date= 
  (
  select min(a.deactivation_date)
  from 
  agents a
  where to_number(to_char(a.activation_date,'YYYY'))=to_number(to_char(a2.activation_date,'YYYY'))
  )

  ..... I am not real to marry these two statements together in the Update statement. I can't extract each date of deactivation produced in the first select statement and their match against the first date of deactivation in the year they have been activated for the second select statement.
  
  Any help greatly appreciated... :))

  I began to wonder how things would :)

  user8695469 wrote:
  First of all why he chooses the date the earliest of all agents

  UPDATE  AGENTS_COPY AC /* (1) */
  SET     DEACTIVATION_DATE = (
  SELECT  MIN(AGS.DEACTIVATION_DATE)
  FROM    AGENTS_COPY  AGS
  ,       AGENTS_COPY AC /* (2) */
  WHERE   TRUNC(AGS.ACTIVATION_DATE,'YEAR') = TRUNC(AC.ACTIVATION_DATE,'YEAR') /* (3) */
  )
  

  He recovers as soon as the subquery has not been correctly set in the SET clause. It seems you are trying to update a correlated, but we are still having a conceptual shift. I have added a few comments to your code above and below will explain.

  (1): when you do a correlated update it is useful to the table alias that you did right here.

  (2): this table statement is not necessary and is the reason why the FIRST deactivation date is selected. The alias that you use (3) refers to THIS table, not the one defined in the update statement. Remove the line indicated by (2) in the FROM clause and a correlated update will happen.

  and secondly why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  user8695469 wrote: then why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  
  WHERE EXISTS
  (
  SELECT
  a.agent_id,
  count(m.mission_id)
  FROM
  agents a
  /* INNER JOIN AC ON AC.AGENT_ID = A.AGENT_ID */
  INNER JOIN
  missions_agents m
  ON
  a.agent_id=m.agent_id
  GROUP BY
  a.agent_id,
  a.deactivation_date
  HAVING
  count(m.mission_id)>7 AND a.deactivation_date IS NOT NULL
  )
  

  Once again this problem is similar to the question above that a correlation update doesn't work. Test existence of lines in an EXISTS subquery. Since your subquery is not related to the table that you are trying to update, it will be always return a line and, therefore, it returns true for EACH LINE in the AGENTS table. To limit the game to only agents > 7 missions results, you need to add a join condition that references the table in your update statement. I added one above (with comments) as a sample.

  I recommend you look over all material that you have associated with correlated subqueries, including documents that I posted above. This seems to be what you're having the problem more with. If you need me to explain the concept of correlated queries any better please let me know.

  Thank you!

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K