Problems with the removal of password for stsrting upward

Similar Questions

• Problems of the change of password for my iMac

  I'm finishing the change of password for my iMac in early 2014 running on the latest version of El Capitan.

  When the opening up of the procedure is finished, I get a message in the upper right of the home screen of the iMac. The message says that I need to enter my new password to complete the amendment of the code of procedure. I can either click on "enter new password" or "delete" message. I tried to click on the two, but nothing happens except the message disappears.

  It's all quite strange that I have to use the new password to open the iMac for use and it recognizes the new password, if I try to change the password once more.

  Can someone tell what I am doing wrong or where I need to enter the password to complete the password change procedure. Thank you!

  This problem has not yet someone can help please?

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• Problem with the trial of InDesign for Mac

  Hello! I have problems with the InDesign trial download to my Macbook pro. This works on my macbook air to friends, but now on my computer. What can I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Problems with the generator of Folio for CS5 (Mac)

  Hello

  I run Adobe CS5 Suite. I am currently developing an iPad app and run into a problem with the generator of folio. Previously, this computer doesn't have a generator all of folio. I followed the instructions on adobe.com and downloaded and installed the update producer folio tools (http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5433 & starts = 5435) and then downloaded and installed the updated folio builder Panel (http://www.adobe.com/support/downloads/product.jsp?product=180 & platform = Macintosh). When I open inDesign, generator of folio is still saying "an update Is had to use Folio Builder."  "Please click here to download the producer Folio tools."

  I don't know why this is happening because I have already downloaded the new tools producer, by following these instructions: http://help.Adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

  Anyone have any suggestions on how to fix this? Please let me know as soon as possible.

  Thank you very much for your help!

  Try the following steps:

  1. on your mac, go to the Spotlight, search > uninstall Folio builder control panel - uninstall, uninstall producer Folio tools research - uninstall.

  2 then uninstall Adobe Air.

  3. restart your Mac.

  4. install Adobe Air

  5 re-install the Folio and tools Panel generator producer Folio.

• Many problems with the runtime Adobe AIR for Android

  I created an application on Adobe AIR for Android platform, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of the Adobe Air runtime.

  For example, these users phones: LG LGE-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of the Air, their phones are compatible with it.

  Tell me how to solve the problem?

  In addition, I have a few questions:

  1. Decides that the problem of demand for export with built-in AIR runtime?

  2. I have create my applications using ADT. In this case how do I seal AIR runtime?

  3. is it possible to invite the user to download and install older versions of AIR? Where can I find her?

  I hope I can help, because the problem is global.

  Hi Astraport,

  I think you should integrate the air in your application runtime,

  Some time ago I wrote a step by step guide, take a look at this post:

  http://forums.Adobe.com/message/3961579#3961579

  I hope it helps

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to solve problems with the update of security for Microsoft NET. Framework SP1 (KB2657424)

  I hope that Microsoft Support will answer this question:

  Homepage of Microsoft Windows Update is re - download and reinstall the same update (KB2657424).

  I was advised to try this link: https://support.microsoft.com/oas/default.aspx?gprid=6527 and it brought me to this page.

  I downloaded Microsoft Fixit 50202, installed and ran, but in "default" mode, since he warned that "aggressive mode" may disrupt other updates.

  It took me 8 hours (using a dial-up access provider) to get through all of the suggestions, including those in the following links:

  http://support.Microsoft.com/kb/910339

  http://support.Microsoft.com/kb/906602

  http://support.Microsoft.com/kb/2657424

  http://www.Microsoft.com/download/en/default.aspx

  I followed the suggestion of Microsoft to visit their site and check out "Review of my update history". Since January 11, 2012, when Microsoft first downloaded the update to in question (KB2657424), it failed. Microsoft has offered by clicking on the Red 'x' next to the 'update failed' to open the info on the reason that has been...

  Error code: 0x01

  Microsoft proposed the search for this error code in this list:

  http://support.Microsoft.com/ph/6527

  The error code is not in this list.

  Microsoft said then click "find solutions," "enter keywords" and click on "search". The result was this message: "Sorry, no result found not to match this criterion."

  As I mentioned earlier, since the first update "failed", I clicked several times on the icon (almost daily), which reappears constantly in my taskbar, asking me to "Reinstall", the update, and these measures have been recorded at yellow end of Microsoft. As I mentioned earlier, the update of security (KB2657424) is already listed in my Add/Remove programs as being installed. The "update history" reveals that a series of 'success' (KB2657424) facilities are recorded as well as "failures".

  I went to Windows Update Microsoft Web page to 'review my update history'.  After analysis of my PC, Microsoft has determined that (KB2657424) "has been downloaded and ready to install," with another update of IE (KB2618444). So I clicked both for "Quick Installation".

  When you are finished, I revisited the "update history review". (KB2657424) has been disabled with the green icon as 'successful', while at the same time, in the right box next, there was a message: "Install Updates (1).» So I clicked it, and another window open with the message that the "high priority update" (KB2657424) had to be installed. Yet once, I clicked on "Install updates". He ended with another successful window "Update."

  Then I clicked to "review update history", and it was registered under the name "successful." But the window beside her reappears at the same time: "Install Updates (1).» I have has. ... It was the 3rd time within an hour. 3 slices of the same update (KB2657424) are now disabled with the green icon as "successful"... but the window side "House of Windows Update" reappeared again with the same message: "Install Updates (1).»

  Then I followed the suggestion of Microsoft to type in the "run command" keywords to the day windows journal. Since the January updates up until this date in February the journal is 428 pages (transferred from Notepad to Microsoft Word.)

  Then I followed the instructions to download the update 'NDP35SP1-KB2657424 - x 86 .exe' (1.3 MB) directly from Microsoft link... http://www.microsoft.com/download/en/details.aspx?...28569.

  As instructed, I proceeded to manually install it in "Safe Mode".

  The result was this message:

  Patch installation (c:\35b7019bd0df08ac0003ec93627c\NDP35SP1-KB2657424.msp) failed on product (Microsoft .NET Framework 3.5 SP1). MSI log: Microsoft .NET Framework 3.5 - KB2657424_20120209_020143359 - Msi0.txt

  I scanned the PC with anti-virus and anti-malware programs, and none of them found any malware or virus in the way of updates from Microsoft. "The 'update' where it is saved in the Microsoft Download link is the only and unique" ""NDP35SP1-KB2657424 - x 86 .exe." The "Update" as it is installed in my Add/Remove programs in the Control Panel is the same.

  However, both "Windows Update Home" to Microsoft Page as well as in my BONES, the "update" continues to override all commands of Windows. Another odd fact, is that this "update" that keeps re - download and reinstall itself is actually partitioned into three parts, and I wonder if they may be "clones". Maybe the Windows Installer Service does not know where to place them, or what to do with them. These are three:

  MSIPatchRegFix - X 86 .exe_

  NDP35SP1-KB2657424 - 86.exe_

  NDP35SP1-KB2657424 - 86.exeQ

  Hi Jeine,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• Problem with the Removable Storage Service and Microsoft Fix it 50198

  I updated Windows XP computers in an office from Internet Explorer 7 to Internet Explorer 8.  During the process, the installation gave me security errors.  I resolved to fix these errors by running Microsoft 50198 recommended in troubleshooting Internet Explorer 8.

  The facility has been able to complete, but there is a new problem.  All computers that require this hotfix are now unable to use and USB storage media.  The following error is generated in the event log:

  Event type: error
  Event source: Removable Storage Service
  Event category: no
  Event ID: 111
  Date: 15/03/2011
  Time: 12:48:09
  User: n/a
  Computer: WCML-HNCX5J1
  Description:
  RSM could not load media in drive drive 0 of library SK_USB20 drive Flash USB Device.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 01 00 00 00...

  I am logged in as an administrator and have tried several different USB media with the same results.  I am posting this in the security group as it seems to be linked to security changes made by Microsoft difficulty he 50198.  Other computers that do not need this fix do not have the same problem.

  Thank you for your response.

  I'm working on it, I think I found my problem.  These computers are part of an area in which I do not.  They will be removed from the field in a few weeks as they are separate from this company.  The area has some group policy settings that limit to me logged on as a local administrator.  I think I'll have to wait until computers were removed from the field to solve this problem.

• Problem with the removal of the first row of the table

  Hi all

  I have a problem with my forms with tables where I have buttons to add or remove rows from the table. Adding the lines works fine but deleting lines has a problem when deleting the first row. Example: Here is a table with two rows where column 1 has the add and remove buttons and column 2 user imput that looks like this:

  Column 1	Column 2
  Add and remove buttons here	rank 1
  Add and remove buttons here	rank 2
  Add and remove buttons here	rank 3

  If the user deletes line 2 the table looks like which is correct:

  Column 1	Column 2
  Add and remove buttons here	rank 1
  Add and remove buttons here	rank 3

  If the user deletes line 1 then the table looks like which is false since the ranks 2 and 3 should be left:

  Column 1	Column 2
  Add and remove buttons here	rank 1
  Add and remove buttons here	rank 3

  The code is pretty simple:

  Table3.row2.instanceManager.addInstance (1); for the click event of the button Add line

  Table3.row2.instanceManager.removeInstance (1); for the click event of the button Delete line

  What I am doing wrong?

  Thanks in advance!

  Al

  The expression will be based on your structure... done .This refers to the current object, parent refers to the container parent of this object and index is the index of this object. So watching your hierarchy and from the key, you will need this.parent to join the line subform is it in (usually it is th esubform that repeats). If it's in a subform, you will need to add another parent. Continue on this road until you get to the repeating subform and then ask its index. Your expression might look like this.parent.parent.parent.index. Using this.index, you find the instance of the button object and there are just people and that's why you always get 0.

  Make sense?

  BTW your form is attached not... so I can't check what you should put it.

  Paul

• Problem with the Satellite C855-2EU for departure

  Hello

  When I start the computer the toshiba logo comes then she turnes
  All gray and then sometimes a clear blue screen with the text, but I can't read because
  It disappears fast then the toshiba logo comes up again and again
  Once again!

  Please could someone help me?

  I think you're talking about the blue screen (BSOD) shortages and the laptop crashes somewhere in the loop.
  In my opinion, this loop can be caused only due to hardware problems.

  I put t think its a software problem because Windows 8 includes a feature called auto repair recovery trying to automatically diagnose and fix common problems that can cause Windows 8 not start correctly. Auto repair starts automatically when Windows cannot start properly. Once launched, it will scan the various parameters, configuration options and system for settings files and corrupted files. If it finds anything, it automatically attempts to correct for you.

  Have you changed in the past something in the hardware configuration?
  Maybe a few upgrades of memory, etc.?

• Phone call about problems with the 315-633-3442 for scam program windows?

  Calls - call display unknown name showed & number.  Said I was outside and I could take a message :)

  They wanted to solve a problem with windows, when I called them back.

  I asked for her phone number - 315-633-3442

  Gave them no information - but they didn't know my name.

  Feels like a scam...

  Thank you

  If someone * COLD * you called and told me * you * you have problems - this is a scam.

  If you called someone and they later called you back - less likely to be a scam.

  Despite all the elders attempts-, we were unable to reconnect the webcams placed throughout your home/business/means of transport and matching clothes and all the means we have of your remote control system and follow everything that you do.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)