Help with what are the effects of use.
Hello, I have CS5 PP on a 64-bit (intel i7 with plenty of ram) computer. I want to do is put a dry 5 video on black screen, apply a cache of transparency to be the central part of the 5 video s, then put a circle or ellispe above the center of the video. The problem I encounter is that I can't cache 16 points to be circular, enough; so that when I put the circle outside the center of the video, I see a few uneven masts points. Is there a better way to achieve this effect? Or is there a better effect to use? Thanks for your suggestions Jean
So, you want a thumbnail/lock effect, like that?
Simple: apply the circle (under Generate) effect in the foreground of the video and set the blending Mode to stencil Alpha. Adjust the other settings (RADIUS, feathers, etc.) to your liking.
Tags: Premiere
Similar Questions
-
What are the effects of the clearing the browser Cache?
What are the effects of the clearing the browser Cache?
Caches to store a copy of the page Web that you visit to speed up the loading of the page even when you revisit the page.
Once you empty the Caches, pages must be again downloaded from Web sites.
With higher bandwidth available now, is not a problem.
Sometimes these caches can get damaged and a troubleshooting step
You can clear those without causing any problems.
-
What are the KEYstroke (s) used to CLOSE the current tab in the web browser?
What are the KEYstroke (s) used to CLOSE the current tab in the web browser? I hesitate to use a mouse where can I use sequences of keys, as the mouse is a much slower process. Indeed, to find a list of all the main features that can be used in Firefox, for example ALT + S, followed by R (or several times) and the ENTRANCE used to restore the last browsing session; or CTRL + F to search for a specific word or term? Thank you.
CTRL + W closes a tab at a time. It also closes a window if there is only one tab open in this browser.
-
BlackBerry smartphones, what are the benefits of using the spindle to spindle and BBM?
I have not used BBM again but was compose and send messages pins (peer-to-peer). Is this the same thing as the BBM and what are the benefits of each? Are they better than just SMS? Would like to have an explanation, because I'm confused! Thank you!!
BBM and PIN messages are messages sent from one BlackBerry to another. The message is composed by the sender and goes through the secure server of the RIM before being delivered to the recipient. They are only available for BlackBerry users.
The thing I like about them, it is how you can see if they have been received by the recipient. Once the message reaches the recipient's phone, you will notice a small would be "at the beginning of your message. In other words, that it is delivered. When the recipient opens the message, who had "will change to a 'R' for 'reading'. So now you know that it is actually received by the recipient.
One more great thing about these messages, it's that there is no length limit. As you probably know, most carriers limit SMS 160 characters; not the case with these messages, they can be much longer.
BBM and PIN messages are of the same type of message, but with PIN messages, you are limited to just contact reception. With BBM, you can have a lot of contacts on a cat, or you can broadcast a message to multiple contacts at the same time.
I hope this explains things for you.
-
What are the system properties using JavaFX?
What are the system properties JavaFX uses it, what are their options of value and what do they?
The system properties used by JavaFX vary between platforms?
The JavaFX system properties will continue to work in future versions JavaFX?
Properties of the example are = > - Dprism.lcdtext = false, - Dprism.order = j2d
I'm only interested in JavaFX, not generic-specific properties for the Java runtime environment, or the implementation of the JVM/JDK.
There are some documents that I missed, please just point me to a link to that.:-) From lcdtext I found in JIRA. No idea if this continues to be taken in charge... but I hope of course.
I also would be interested in a complete list. Here is a list of old, I found:
com Sun.Scenario.Animation.adaptivepulse
com.sun.scenario.animation.AnimationMBean.enabled
com Sun.Scenario.Animation.NOGAPS
Decora.purgatory
Glass.Platform
JavaFX.Animation.framerate
JavaFX.Animation.fullspeed
JavaFX.Animation.Pulse
JavaFX.Debug
javafx.embed.isEventThread
JavaFX.SG.Warn
JavaFX.Toolkit
JavaFX.Verbose
JavaFX.version
NativeWindow.WS.Name
Prism.Debug
Prism.Device
Prism.dirtyregioncount
prism.disableBadDriverWarning
Prism.forcerepaint
Prism.MultiSample
prism.noFallback
Prism.Order
Prism.printallocs
Prism.RefType
Prism.showcull
Prism.showdirty
prism.shutdownHook
Prism.Tess
Prism.tessaa
Prism.trace
Prism.Verbose
Quantum.Debug
Quantum.pulsedebug
Quantum.VerboseOf http://www.adamish.com/blog/archives/320
-
What are the different ports used by BTA?
Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?
I am aware of the following:
9001 actually mentioned when you configure a load agent
1099 mentioned when you configure a data collector
1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
4444 -? necessary for the agent to load
7071 -? necessary for the agent to load
I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):
7073
8083
8088
I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.Ian
Oracle.port.RMI = 4444
Oracle.port.http = 8088
Oracle.port.empstart = 9001
Oracle.port.uil2 = 7071
oracle.port.dataCollector = 7073
Oracle.port.WebService = 8083
Oracle.port.JNDI.rmi = 1098
Oracle.port.JNDI = 1099
Oracle.port.HTTPS = 8433You can change the ports
-
\EmpAppServer\server\default\conf\oracle.propertie The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:
* 9001 (the agent communication port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running scripts OpenScript)Concerning
Alex
-
What are the steps to use COPYAPP in planning
I should first create a DSN for the target application? The error says "cannot retrieve the entry of the application to the target application.
What are the exact conditions to execute this utility?Your source and target databases are identical, is the first thing you need to have separate databases of sql server by planning an application
See you soon
John
http://John-Goodwin.blogspot.com/ -
We have a problem were user profiles continue to accumulate on the desktop display used in laboratory environments where multiple users connect. I don't want to delete the virtual machine when a user disconnects, because we're in an educational environment were we have 30 + students logging in and off every hour. For a lot of activity on the back-end for my tastes. I would use the last-born independent disks disk mode. It is available in the virtual machine settings in the VI client. This will outline the hard drive to it original state after it is restarted. Anyone used this feature with a view? I noticed that this is not a feature of the view itself, so I was wondering if it was by design and if I use it if it will cause me problems.
Thank you
Ty
I used the mode of non persistent disk in without any problem. One thing to watch is the computer account AD password age. I came across a situation where it has been updated in AD, but my non-persistent drive had the old password. I ended up having to join the domain for all desktop computers. You can disable this via a GPO and it should go. Since you have many users connect you can set desktops to reset every night, so don't be the sizes of drive out of control.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
Need help with timing of the effect!
Hello! I currently own Adobe CS5.5. I have not touched After Effects for awhile now, I would like to use an effect and be able to start and finish the effect whenever I want bascially, but I'm not sure on how to do because it simply works the effect through the entire video I'm editing. Help, please! Thank you!
Easy-peasy! Just set keyframes for the effect to animate properties. The closest together set you keyframes in the timeline, change things faster. You can drag the keyframe around, too.
-
What are the benefits of using a namespace, such as "flow"?
Last week, I started to drawn through several articles to blogs, livedocs and api on TLF and noticed in some XML data that will be used to the TLF uses namespace, such as "flow." What benefits are currently or in the near future to use? And it is--to have the data to use a namespace?
Moreover, this framework gives me goosebumps. Can't wait to begin to produce work of this one.
The main reason to use a namespace is if you want to use some of your items and will not have to worry about name collisions. But you can make space names tlf (or another) space of names by default, then you do not have to use the stream: prefix everywhere.
Happy that you can't wait to write code on TLF! Let us know how it goes for you.
Thank you
-robin
-
RH8:Webhelp: What are the parameters to use to open the topic by using the URL?
Hello
WebHelp pages can be opened by URL from a few additional parameters so I need to integrate my WebHelp with some third party applications and specific topic was opened instead of the cover page of WebHelp. That is, I want to open the topic that speaks of "Ice Cream" then how to design URLS that opens the topic "Ice Cream", or open the search with search results 'Ice Cream' page.
I watched a feature of content sensitive help, but this one is not exactly what I want since I need to have a complete mapping list in RoboHelp and updating a list on application third regularly too.
Hello
Read the excellent article on the website of Peter: http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm
It describes the three methods of appeal for help and how to implement.
Note: The files needed for the sensitivity of context are mapping (.h) file and the aliases file to map the topicId to a file. You can easily create a script to generate all this information, if you do not have to do that all by hand.
Take a bow
Willam
This email is personal. In our view, full disclaimer, please visit www.centric.eu/disclaimer.
-
Help with registration of the PDF when using Windows Fax and Scan
When I use the Windows Fax and Scan, I'm trying to scan a document and then save it as a PDF file. What happens is when I save it, it opens Adope Photo Shop and will not let me save it as a PDF. How can I scan a document and then save it as a PDF in Windows 7.0?
If you have Word 2007 or later, you can scan it, then save it as a PDF. Works fine for me. I have a Canon LIDE 100 scanner, I bought for $50, which will also scan directly to PDF.
I hope this helps. Good luck.
-
What are the best steps using the widget form of Muse to reduce spam
Greetings, I get now a bit of spam of contact that form join us
Is there a way to reduce that?
Thank you, David
Hi David,
I see your online form doesn't have a recaptcha, you can use recaptcha to reduce to submission of spam. You must add recptcha to your online form and publish the web page. Here is a step by step guide that shows how to do this.
Adobe help Muse | Work with the shape of Widgets
Please let me know if you have any other question.
-
What are the effects of plugin development when new version of InDesign CS CC version?
Will there be a CC SDK version available? Or the CS6 plug-ins can be loaded into CC version? Otherwise, plug-ins are required to be recompiled?
Is there an official documentation on the development of inDesign in CC?
Thank you very much.
The plug-in for InDesign CS6 is not compatible with InDesign CC.
InDesign CC is a 64-bit, native Cocoa on Mac OS application.
You need to use the SDK for InDesign CC, but is not available yet.
-
Can what are the chances I use on my Satalite M40 - 276?
Hello.
I have the Satellite M40-276.
After 5-6 years mast * one cant readd UJ-841 workout DVD any DVD more, can not burn... Ok
I buy a new DVD from a friend, but Toshiba does not acknowledge a new reader, try several LG, samsung, toshiba player!
Are you that a list od manufacturing drivers which can be replaced by uj-841Please consult the of manuals of s of the user for your laptop, and here you can find.
If you still need help let me know. I get it you.
Maybe you are looking for
-
ThinkPad Yoga 14 - cannot unscrew the back cover
I just bought a Yoga 14 TP. I'm looking to replace the hard drive with an SSD. A video on youtube, I checked and I just need to remove the screws from 8-10 on the rear cover and then pull it out completely round hinge. But for some reason, I can't un
-
Windows xp professional sp3 general system control panel displays the wrong amount of system memory
Have a Dell Optiplex GX280 running Windows XP Pro SP3 with 3.5 GB of memory. BIOS confirms the good memory installed, but the control panel > system > general tab displays only 2.99 GB of memory. Is there a fix for this issue or Windows using only t
-
What do you mean by the above error message? How can I complete my program of recovery in factory settings? It stops at 32%, thanks
-
Exception of HTTP after migrating TMS with TMSPE
Migrated 13.2 TMS with TMSPE physical server in VM 2008R2, which went well, however, VCS - C is now sent me some exception HTTP State for all services supply; users, directories, and devices. Status: failed Answer: HTTP Exception Reason: HTTP error (
-
How to partition HP drive media
have pavillion d5000 with vista I need to partition the multimedia Pocket Player before using it, and how do I do it.