ThinkPad Yoga 14 - cannot unscrew the back cover

I just bought a Yoga 14 TP. I'm looking to replace the hard drive with an SSD. A video on youtube, I checked and I just need to remove the screws from 8-10 on the rear cover and then pull it out completely round hinge. But for some reason, I can't unscrew the tiny screws and proceed to their removal. I use a screwdriver 00 but I tried others. It seems that the screws are unscrewed, but they don't pop, even if I hit the back of the case with my hand. I tried using tongs to hit against the screwdriver stall the in and rotate using the clamp as I've seen in some videos, but it doesn't seem to help. Is there an automatic screwdriver and the size I would be using or else I can buy (amazon, home depot), let me know. Thank you

Thank you

I found the answer on another Board

Here's the captive screws. They are not designed to remove completely and are usually attached to the backplate

I can always remove the backplate when they unscrewed to halfway

Tags: ThinkPad Notebooks

Similar Questions

  • Remove the back cover of my Y710

    Hi all

    I tried to remove the back cover of my Y710 by unscrewing all the screws that are visible, but the lid in the form of S always seems to be screwed. Just use a little more force, or there at - it a secret to this?

    Just for the record, I am trying to replace the HARD drive.

    I thank in advance

    Steve.

    Success!

    The HARD drive is under the Panel S shaped. To remove the Panel S shaped first remove the screws of 7 or 8. Then, start to lift the Panel upwards from the back (ie the closest edge of the hinge). The front edge of the Panel must be slid and can be popped up, as can the other edges.

    Thanks for your help,

    Steve

  • IPad Keyboard Pro require the back cover of Silicon

    I see the folding cover overlooks iPad 9.7 Pro and only fit when the back cover of Silicon is also used.

    This overhang is also present with the Apple keyboard and therefore demanding Silicon save coverage at the line properly?  If this isn't the case, I can use a simple body.

    Please notify.  Thank you.

    I have the cover Silicon Apple and keyboard on my iPad Pro, however, I can use any combination of them, or both of them at any time, you have not physically to use silicone case to use the keyboard.  If you want to use another case/cover/skin, it is useful to check that it is compatible with the keyboard, most good quality well-known brands should have the right physical profile, but not necessarily all the 3rd party.

    I hope this helps.

  • 15 - af005ax: how to open the back cover

    Hello.. I would like to ask how to open the back cover for my laptop? Can you give me the tutorial? I want to clean my built in fan.

    Thank you

    Hello Nikki_Ong,

    You can go there.

    Link: http://h10032.www1.hp.com/ctg/Manual/c04653881

    Page 45

  • 2015 envy 17 t-n100 I76700HQ: how to remove the back cover of a 17 t-n100 envy?

    Hello, I upgrade my Ram and hard drive 16 GB of Ram and 1 TB ssd drive. I looked everywhere, but for the life of me I can't find any info on how to remove the back cover. There are utube videos that show older versions, but they are completely different. You can provide any help would be greatly appreciated.

    Thank you

    Hello

    Did you know that it's a job for parts of authorized service provider ? If you wish, for the RAM, try it please:

    1. turn off the computer. If you don't know if the computer is off or in hibernation, turn on the computer and then stop it through the operating system.
    2. remove power from the computer by disconnecting the power cord from the computer.
    3. disconnect all external devices from the computer.
    4. remove the battery (see battery on page 27).
    5. remove the optical drive (see optical drive on page 28).
    6. remove the bottom cover (see low cover on page 31).

    as mentioned on page #38 of the following record:

    http://h10032.www1.HP.com/CTG/manual/c04696907.PDF

    DIY will void the warranty.

    Good luck.

  • I want to know how to remove the back cover of my HP Pavilion Sleekbook 15 to install the new memory?

    I want to know how to remove the back cover of my HP product name: HP Pavilion Sleekbook 15 to install the new memory?  All site shows HP Web is how remove caches memory.  Unfortunately, with the newer models like mine, the whole back cover needs to be removed.  I have tried in vain to remove it, but so far all that I managed to do is scratch my cover.  If anyone can help?

    Dear David

    It's a very good idea, it would also be a good excuse to use my new phone for this.  So I'll say thanks again for the good advice.  Have a great weekend you Mr.  As I said earlier, you're a star...

    Yours Sincerely

    Alan

  • Tab 2 A7-30 crack when you press the back cover

    I had 2 tab 7-30 a couple of days and I noticed that when I pressed the back cover with my finger, I hear a strange crackling. So there is a cavity in the back... Is this normal?

    I don't know if this is a defect, but the Bank just called me and they are replacement

  • 23 - g010 removal of the back cover

    I am trying to remove the rear panel of the all-in-one computer from HP 23 - G010. I can't find a manual with instructions. I know that once I open the back cover it will probably cancel my warrany and that's okay. I want to increase the RAM on my own. I see two screws at the bottom and nothing else. I am looking for step by step. Thank you.

    Too bad... I found the answer.

  • Photon: Best way to snap the back cover in place?

    What is the best way to put the cover back on? What sequence I use, it seems that one of the plastic snaps is not committed.

    There are instructions inside the battery cover. You start at the bottom and work your way up to the left and the right. That being said, check the clips on your lid and make sure that one of them is not folded. This happened to me the first day I bought the phone. I had to get a new one from the Sprint Store. Do not force the clip if it is wrong. I think that's how mine has folded.

  • ThinkPad Yoga, can not change the settings in the BIOS after upgrade

    Hi guys,.

    I just flashed BIOS on my thinkpad yoga 20CD00B1US.

    I got the lates BIOS 1.18/1.09 and sice this flash, I can't make changes in BIOS. I may list in the BIOS but can't highlite and change any setting expect fast start enabled

    My Manager the same get me this warrining: the controller board (EC) returned data when none was requested. The BIOS may try to access the European Community without synchronization with the operating system. These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

    I have put the supervisor for the BIOS password password to power on. When you go into the BIOS, I ask me to put the password, which could be the problem. But why, I have no idea.

    Help please!

    Sorry guys,

    problem sorting, my password BIOS supervizer was different from the power on password, always when I was promt to password, I put here one for power and he let me go in BUT when I wen in the BIOS, I was not able to access the settings.

    After I set supervisor password good everything works how suppose to.

  • TVSU not showing the latest drivers for Thinkpad Yoga or update to the latest version of the software

    I use Windows 8.1 x 64 with a Thinkpad Yoga

    I have TVSU (software update for ThinkVantage) version 5.03.0010 which it updated itself from a previous version.

    However, on the support page for the Thinkpad Yoga:

    http://support.Lenovo.com/au/en/products/laptops-and-netbooks/ThinkPad-Yoga-series-laptops/ThinkPad-...

    The latest version of TVSU is indicated as 5.06.0020

    The current version of TVSU I use is not updated my Intel graphics to the most recent driver has featured on the above Web site (the latest version on the site is 10.18.10.3855 10/17/2014 so that TVSU mine updated only 10.18.10.3383 an older version that is not available on the Web site).

    I prefer to do everything through automated updates and I ran into errors of manual update. No idea why this is happening and what I can do about it?

    It's normal.  All pilots must go through quality certification before appearing on SU. In general, a period of 2 months from the version posted on the support page.

    The absolute latest version would be on www.intel.com. The support site has the absolute latest version.

  • CC of Lightroom book Module will not show the cover and the back cover when I try to create a book.

    Hello

    I recently installed the latest update of Lightroom CC on 09/12/15. I imported a bunch of pictures of customer so that I can make an album. I made this countless times before, but this time, when I've imported the photos and entered the book module it exceeds all the photos but do not give me a model for a front and back cover. Is it hidden? I searched everywhere on lightroom to try to fix it, but can't see what I can change. I even stop and restart Lightroom, but the same thing happens. No rear and front cover. What can I do? Help, please.

    Hi kathleenp75670290,

    Could if it you please let me know the exact version of Lightrooom, click Help > about Lightroom.

    And also what operating system are you working?

    Also could you please attach a screenshot of the book without pictures in Module?

    Kind regards

    Tanuj

  • You can remove the back cover of the Milestone 2?

    Hi I just got my Milestone 2 today (9 December). Because I had to use my old phone for charging the battery I assembled the phone without the SIM card. I want to insert the SIM card now I can't remove the back. I try to push the lens of the camera and move it for abour one third of a millimeter, but no more. I broke my thumb nail trying to push even more away, without result. I can move it back again. Any suggestions?.

    Maybe your back is very tight, but I can remove it easily mine in holding the phone face down, and using the apartment of my thumbs in the back and pushing the lens on the camera. It moves about 2mm and can then be raised.

    Good luck.

    See you soon,.

    Steve.

  • Cannot use the back button on the Web PDF pages

    I Windows 7, Internet Explorer (IE) 11 and Adobe Reader DC, all day. Whenever I go to a PDF Web page by clicking on a link in the Google search results and then want to return to the search results page by clicking the back button on the browser, it will not go back. Page PDF just charging once again. This does not occur when I use my browser Google Chrome, when I use IE. It happens with every page PDF that I access from the Google search on Internet Explorer. What can I do to be able to use the back button on the Web PDF page?

    Google made a diversion when you click on a search result. You can see if you right click on a such result and select Copy link location, and then paste. Is not the real address - the web site, but a link to a page of Google.com. So when you click on back after going to her, you can end up on the same redirect page, which automatically will then take you to its destination... Some browsers can handle this better than others, but it is not related to the PDF file you open.

  • X61s cannot restore the back upward.



Maybe you are looking for

  • Apple pirate ios?

    Please help the Apple community (and spreading the word): I was going through the records of e-mail in "on my Mac" (OS X El Capitan 10.11.3 version) and stumbled upon several e-mail folders that were never created.  One of them was titled "45 rpm", a

  • ScreenSize

    I have a laptop HP pavilion dv 5. With windows vista. My dpi is set to 96 and I played with the resolution. My problem is that Nothin fits the screen. Everything is on a large scale. I use a horizontal scroll bar to view all the material. I have not

  • iMac under Snow Leopard - SCANNER COMMUNICATION CANNOT BE ESTABLISHED: HP LaserJet CM1415fnw

    iMac under Snow Leopard, reverend 10.6.8. New HP LaserJet CM1415fnw Printer works, emailing and printing of documents wireless; However, scan has already worked. I have my printer works wirelessly... I've updated to the last s/w Snow Leopard by Apple

  • How does the Gadget "Fix - It" program?

    Hello, regarding the notification "Gadgets" in Windows 7 are a potential security breach and that there is a Fix - It program to eliminate the hole, I ran the Fix - It (Enable) program to remove Gadgets from my system but they are still there. I'm su

  • Invalid field

    Hi all I have two areas of labels of the gains of land vefticalfield first manager.when label focus wil change to yellow color of his text. Along with this, I need second label field to change its color... That is to say, when the first label field g