Help, XP won't boot, missing the virtual file Disk.vmdk

Similar Questions

• Pavilion new hard drive XP Media Center Edition 2005, won't boot from the system recovery disks

  Hi, I'm trying to replace the hard drive in Pavilion a1620n a member of the family with XP Media Center Edition 2005 where the original Samsung SP2504C HDD failed.  I HAVE the original recovery discs 1 and 2 system and additional recovery disk supplied with the PC but the problem seems to be that I can't get the PC to boot from them to start the recovery process.  I installed a new Western Digital 500 GB HARD drive.  The BIOS recognizes it is installed (as well as the existing DVD - RW drive) and drive past the on-board CHIP support tests.  I tried using the Boot Menu ESC to select the DVD - RW Drive as the first Boot device, as well as the tab Boot Setup of BIOS F1 to set the 1st boot CD-ROM device group and other people with disabilities.  After reboot, the drive of DVD - RW turns on for about 2 seconds, then turns off and the display shows "DISK BOOT FAILURE", INSERT SYSTEM DISK AND press ENTER.  I thought maybe I needed a kind of bootable CD boot disk to format the drive first, so I tried a BACK 6.22 bootable CD and a bootable CD of MEMTEST, that work on the other PC, but I get the same message "DISK BOOT... "on this one.  My next idea would be to try to host the new drive on another PC and copy the files on it recovery disk... but is it really necessary?  If the own PC system recovery CD should not be able to... Recover?

  It seems to me that the ligthscribe drive has a problem.  Replace the disk and it may be OK after that.  On a PC so old, it is probably an IDE drive, but check first.

• Satellite C50 won't boot to the top

  Hello

  My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

  Thanks in advance.

  You write about Windows or BIOS password?

  In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
  Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

  What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

  Is the cooling fan may be strong at the start of the machine?

• My Satellite C660-155 won't boot to the top

  My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

  It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
  Any advice would be greatly appreciated.

  For better understanding, you must offer more specific information.
  You can enter boot options using F8 at startup?
  Figure option fix my computer in the list?
  You can boot OS in safe mode?

  Did you create the recovery disk?

• Need help setting bios to boot from the cd. I did already but the laptop does not start again for cd player.

  Hello

  I forgot that my administration windows log password after the holidays.  I have loaded down a free program called Ophcrack and had set my laptop to boot from cd 1 but I just cannot get the laptop to boot from a cd.  He just continued boot from the internal hard disk.

  The cd is an image and it is bootable on my desk.

  The model of laptop: laptop HP ENVY m6

  Product number: C2N77UA #ABL

  BIOS version: F.25

  Processor type: Intel Core i7-3632QM CPU @ 2.20 GHz

  OS: Windows 8.1

  I only did a password reset disk (I'm learning the hard way now!).

  I don't want to do a "System Recovery" because I have some data on it.

  I realize there are paid there password recovery tools windows, but I would like to use this 'free' program to try to break 1.

  I just need help / instructions to set the bios for laptop can be started from a cd.  I also tried to boot from a key USB but the laptop kept begin its internal drive.

  Help, please.  Thanks a ton!

  Ted

  Hi Ted,

  You are welcome

  Boot into the bios menu and go to the very section where you have disabled the Secure Boot.

  Find an entry called materials and this value to Activate.

  Save the changes and exit the bios.

  Follow the previous procedure below:

  Insert the bootable disc of Ophcrack and laptop stop.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K

• Going from a 4 TB disk 6 to drive. Do not copy the virtual files, where I do my editing. Anyway I can move them? I use LR 5.7 on a Mac.

  I ran out of space on my drive of 4 TB, so I copied everything on a 6 TB drive. But the virtual files in Lightroom, where I do most of my editing, do not appear on the new disc. Is there a way I can get them displayed, and my changes on the new drive?

  Photoshop Lightroom

  Adobe Lightroom - find moved or missing folders and files

• Read the last sector of the virtual hard disk

  Hello

  I'm running Windows 7 Home Premium VM inside VMWare Workstation image. I want to access the last sector of this Virtual Hard Drive. However, I do not within Windows 7 itself.

  Instead, I want to start this virtual system using a bootable Livecd. To this end, I can create an ISO using the Windows XP Installation CD and Bart PE Builder.

  Now my question is, how do I boot under VmWare Workstation Livecd Bootable using Bart PE created so that I can access the virtual hard disk.

  And also, once I started the new system, I want to read this last sector of the virtual hard disk. This is for testing purposes. I know, it could be done on a running system as well however, I want to be able to do this in VmWare Workstation.

  I searched the net for a solution. I came across the Disk Explorer utility, which is available here:

  www.Runtime.org/DiskExplorer.htm

  In my view, this will allow me to read the last sector and thus copy. It is however an expensive software. They have even a plugin developed to work with BartPE, which is available online here:

  http://www.Runtime.org/diskexplorer_for_ntfs.cab

  But we need to provide the license key in the .inf for this file to work.

  In any case, I know how to prepare the Windows Bootable Live CD using BartPE.

  Issues related to the:

  How to get started in using a windows live CD VMWare?

  How to access the virtual hard disk of the Windows 7 operating system?

  And finally, are there other alternatives that are easier to explore this disk that would allow me to read the last sector of this virtual hard disk and copy another medium?

  Thank you.

  I am able to use the keyboard in knoppix, but the mouse doesn't seem to work properly. I am able to click right on the desktop but not able to select any option. The behavior of the mice is completely wrong.

  Is it possible to fix it?

  You can try to temporarily adjust the Type of guest OS Linux or edit the .vmx to have these parameters/values or temporarily remove the USB controller.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

• Is there a way to increase the size of the virtual hard disk? in the VM? ESXI 4.1

  HelloW to all.

  I created VM with the size of the hard drive of 80 GB and now I want to increase the size of the 80 GB to 150 GB drive does not add whit extra 70 GB partition but to increase the patitionn of 80 GB.

  Is there a way to increase the size of 150 GB of the virtual hard disk? in the VM? ESXI 4.1

  Thanks in advance.

  If the guest operating system is windows, then follow below process-

  Scenario-1 his drive is not the boot partition.

  1. click on the settings of the virtual machine

  2. Select the hard drive to increase and give the size you want (don't forget that you should have a free space available on the data store).

  3. go to disk to the virtual machine management, and then rescan disk (you will see the unused space)

  4. open the cmd/command prompt, then run diskpart by using the diskpart command

  5 then... the drive... After this list give the command "select disk 1" (1 is the disk you want to expand)

  6. After selecting the disk, type extend (extend order will extend the drive)

  7. exit diskpart.

  Scenario-2 If the drive is the boot partition.

  1. power of the virtual machine. (go on change settings of ==> click on the drive you want to extend ==> copy the path of the disc)

  2. go to any other test VM and add disk--> disk existing use ==> give the drive path that you want to extend ==> Assistant to finish.

  3. Select the hard drive to increase and give the size you want (don't forget that you should have a free space available on the data store).

  4. select disk of the virtual machine management, and then rescan disk (you will see the unused space)

  5. open / cmd command prompt, then run diskpart by using the diskpart command

  6. then... the drive... After this list give the command "select disk 1" (1 is the disk you want to expand)

  7. After selecting the disk, type extend (extend order will extend the drive)

  8 exit diskpart.

  9. go to change the setting of this test VM and select the hard drive... ==> click on remove virtual machine. (do not drive delete)

• Fusion is stopped because the virtual hard disk capacity is reached

  I run Windows XP Pro in a virtual machine with the German Fusion 3.1.1 on my MacBook 13 "with Mac OS X 10.6.2.

  When I try to start Windows the VM said: "VMware Fusion has the virtual machine is stopped, because the capacity of the hard drive (40 GB) is almost reached."

  But this Windows disk management in the first partition 'Win XP Pro' 15 GB to 30 GB are free. And on the second partition 'Install' 8 GB to 10 GB are free.

  I took the snapshot on the virtual machine and have managed hard disk cleanup. But it does not help. Fusion said I do free 1.2 MB capacity of the virtual hard disk. How can I do this, when the merger does not start?

  The opportunity to make more the virtual hard disk of 40 GB to 50 or 60 GB is blocked, I first have to delete the snapshot. But the snapshot is deleted.

  What can I make Fusion work again?

  czer27 wrote:

  When I try to start Windows the VM said: "VMware Fusion has the virtual machine is stopped, because the capacity of the hard drive (40 GB) is almost reached."

  I doubt that what you quoted is the message itself, so it would be more useful if you attach the .log files.  See information for VMware Fusion to help with that.  Howevere...

  I bet that the message is more like "VMware Fusion has suspended this virtual machine because the disk on which the virtual machine is stored is almost full. To continue, free at least MB of disk space. "and as such, you must do exactly what means the message and that is free space hard disk Macintosh not space inside the VHD.  After all, it's the Mackintosh HD stored on the Virtual Machine, isn't?

• The virtual hard disk size

  For worker Analyzer IO VM, it is recommended to create a larger second virtual hard disk that serves as a target IOmeter.

  
  

  Is the size of the virtual hard drive exactly the same workload working set size, which means that all data in the virtual disk is read from or written to storage during the race?

  Do you have other recommendations to decide what size the second virtual hard disk should be a VM worker?

  Thank you

  Rebecca

  Hi RS_1, it's useful, but I was looking for some additional tips for the user guide.

  I received responses from some of the developers of IO parser and also ran a few tests of my own.

  Iometer generates its I/O based on the number of blocks of target disc (i.e. the manually added virtual hard disk on the worker VM).  The size of the disk hard virtual will be be equivalent to e/s working set size.

  For a virtual hard drive that strikes only cache, a rule would be its size to 100 MB.

  For a virtual hard drive that hits the disk, the virtual hard disk could be sized anywhere from 10 GB to the top. The drive, / o most actually hits disc rather than cache.

  To do this, I created a 200 GB thin provisioned virtual hard disk for my e/s VM Analyzer worker. As I ran the Iometer workload, I could see the thin disc quickly increase from almost nothing to its size fully provisioned. This means that the new virtual hard disk sectors were continually being read and written by Iometer. Interestingly, it only took about 5 minutes to flesh out a whole 200 GB drive. Obviously, this speed would depend on the type of I/O profile used.

  I also tested a 20 GB disk Iometer vs virtual a virtual drive of 200 GB. Average latency, IOPS / s and flow were all better for 20 GB disk - because a greater proportion of e/s in this case was hit the cache, tilt the numbers positively.

  So, even at the drive hard virtual, sizes last 10 GB, size of the VHD will affect yet observed performance to Iometer.

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Acer Aspire won't boot to the top! Help please!

  Hello! I really hope you can help me on that because I don't know what to do... so this is what happened: I was playing a game heard music etc. (laptop: Acer Aspire E1 - 772G). However nothing happened, but then 2 minutes after my laptop froze and I waited patiently. After some time, he said something I don't remember and at first there was a sad Smiley biiig [ ]. downstairs he said some .sys arrested or something, I don't know... However, I turned off my phone and he did it again. Normally there must be the Acer's Logo and a Slogan just after clicking the power button, and some quarters would begin to turn around. Well this time it was no small circles and I started worrying. After like 1 Minute of waiting my screen just blacked out and 2 seconds after the logo was back once again, but without the circles. Then a black and blue message popped up, which says: "boot device by default lack or failed to initialize. Insert the recovery media"(I don't remember the rest). Well what I have tried is the following:
  ALT + F10 (absolutely no reaction)
  F8 or F12 don't know (shows me the error Code and what to do. He also says to put in my Windows installation, which I did not. I don't have any recovery media)

  After the message appeared I pressed Enter, and there was a menu where I couldn't do anything. He only told me to press any key, if I put in any recovery media. As I said I didn't, so I just close the laptop. After that, I pressed the power button to restart my laptop... Well, it was the same thing. After that, I turn it off again and tried the things I listed before. I hope you can help me, quick if possible I need my laptop for many other things that are more important than to play haha ^ ^

  I look forward to a quick response,
  iSpextor

  try to boot to the BIOS by pressing F2 at startup, check on the home page if your HARD drive is listed.

  If it listed to go to the exit of tav and choose load setup default, press F10, Save and exit

  try to start

  If you still having problem with missing starting device, your HARD drive is probably dead or having some bad problems; If you are still under warranty, please contact Acer support.

• Re: My Satellite P200 won't boot to the top

  Hi all
  Noobie here,
  I think I caused a problem wher my P200, it won't start, it was very slow and I went into the Task Manager and deleted some programs that were not running, but using the memory.
  In my view, there is a good chance I can I have deleted something that the system needs because it will not load upward.
  I turn it on and I get a light on the HARD drive to the front and a light in the dvd drive, but nothing else, I tried pressing F8 and put the recovery disc in but nothing?

  Anyone have any ideas?

  Appreciate any help.
  John

  I guess you are using the "F8" key to access Windows boot options and Windows is not to leave you. If this of * definitely * the case, then you must insert the recovery CD and change the device to boot from the screen as the laptop boot - can't remember which affects it is than its displayed on the bottom line. I think its possible that W7 can be repair o the problem and a full installation will be unnecessary

• My Satellite 2410 won't boot to the top

  Hello

  My funny hard Satellite because last week, but today it seems to really have given up... when I boot I get a screen that gives you the ability to start in: safe mode, safe mode with the mode of networking, security with guest orders, the last know config, and start windows normally, but no way can you select this error message appears :

  Windows didn't start because the following file is missing or damaged \windows\system\config\system you can try to repair this file by starting windows setup using the original CD-Rom. Select 'r' setup in the first screen to start repair.

  I have the original disc to start but I can't boot from the CD drive and when I press 'r' in the first screen, nothing happens it loads just backward on this black page that tells me I have an error.

  Any help would be appreciated, I have all the files I need sustained if I just need to know how can I reformat from here.

  Thank you
  C_J

  Hello

  First of all the good news: it seems that there s nothing wrong with the equipment and the installation of the new operating system should solve small problems starting.

  And now for the bad news: I think you need to format the HARD drive and you will lose the files and stored information.

  > I have the original disc of starting but I can t he can start from the CD drive
  How have you tried to boot from the CD? Don t press the R key, but you have to either press F12 for the Boot Manager or press the C key immediately after starting the laptop. (The CD should be pre-installed)