Helps the numbering and bullets
Hello
I have a paragraph style that uses numbering, it is called the newspaper. When I apply a paragraph of subtitle style, I want to have balls that take this title number and add a point (.) and then the sequence numbers after that. See the example.
1. dogs (paragraph title style)
1.1 reproduces (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
1.2 colors (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
1.3 etc etc etc (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
2 cats (paragraph title style)
2.1 reproduces (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
2.2 colors (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
2.3 etc etc etc (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
3 rabbits (paragraph title style)
3.1 breeds (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
3.2 colors (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
3.3 etc etc etc (style subtitle would take the number of title and add a point (.) and then the numbering in order after that)
I've tried a few things, but nothing works... someone can help me understand this?
Thank you!
Babs
Note the characters used in the dialog boxes.
Tags: InDesign
Similar Questions
-
select lines with garbage (not the numbers and point symbols)
Hi all! I've got varchar2 column where users insert what they want. But this column is used for the value of numbers (from 0.00 to 100.00). How can I select only the number and the symbol dot:
NVL (ABS (regexp_replace (Replace(Avalue,',','.'),'[^ 1, 2, 3, 4, 5, 6, 7, 8, 9, 0,.,]')), 0)
Now, I need to select lines with symbols of the trash to correct errors. How do I "invert selection"? I mean by selecting only the lines that are composed of waste (except the numbers and the dot symbol).
Thanks in advance.You can try this
select trim(translate(replace(avalue,',','.'),'1234567890.',' ')) from dual
If the symbols of the trash will be inserted then it will return that
-
Number of words - ignore the numbers and symbols
Hi guys,.
can someone tell me how to ignore the numbers and symbols by adjusting the script below, that is, just count the letters in an entire document.
myDoc = app.activeDocument
h = 0
for (var j = 0; myDoc.stories.length > j; j ++) {}
h = myDoc.stories [j].words.length + h
}
Alert ("You have" + h + "words in this document")
See you soon,.
Samuel
In CS3 and later versions, you can use this:
app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = "[\\u\\l][-\\u\\l]+";].
found = app.documents [0] .findGrep ();
Alert ("You have" + found.length + "words in this document.")A "word" is defined here as any string of uppercase and lowercase letters and hyphens. It's perhaps too strict, but you can change the GREP to meet your needs.
Peter
-
It is a question of company about my client being read properly by our customers. The pdf file, we created (secure) or unsafe, can be played in the Player browser by default, but lists in the document (numbers, letters and bullets) don't appear - just indented paragraphs. I tried describing the text, etc. - nothing works. The same files are well in Safari and Chrome.
I could attach screenshots
Maybe that's a problem with the font used for the numbering? When I create a PDF from MS Word that uses automatic numbering or hierarchical numbering in the same font as the text, Viewer PDF in Firefox it displays normally.
-
Hello all, I had this problem with my folder names on my rocket with random letters and numbers at the beginning of my files.
Example: 0B030000_Folder name
How would I go about to fix? Also note, this is visible on the "rocket" itself. If I connect it to the computer the files are fine as I originally intended them to be.
If someone can help me here would be great, thanks!
You send files more in MTP mode via Windows Media Player, which adds the extra junk to help itself index and update the database faster.
If it bothers you, you can go to Settings/System Settings/USB Mode, replace MSC, then drag files yourself, keeping WMP out of the picture.
Note: Your computer will see mode MSC or MTP - not both. So when you connect to the MSC, it will look like your music has disappeared. And when you connect to the PSG, you won't see the files that you send via MSC. The "rocket" don't care how they got there, but the computer doesn't. You can remove records of the MTP, and send even more through MSC.
-
How to record the numbers and words in the same file
Hello:
I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."
Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:
Initial position X 1000
final position X 2000
space 100
But idon't know how to save the words and numbers in the same file.
As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)
Thank you for your attention
Hi bitxor.
You can use all the functions of the WriteTotext file to write strings to a file.
Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...
BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!
-
Query to get the numbers and percent by date range
11g version.
Hello
I have the following data in the format
I want to get all the charges and % of all users who have accepted_flag the value n. basically, users who have not yet accepted in the format of Opty_id.Opty_Id creation_date user accepted_flag 1 01-mar-2013 ryan N 2 02-mar-2013 sam Y 3 02-mar-2013 ryan Y . . .
The column of aging is creation_date, basically, how much body id, were created between now and 20 days, 21-40 and 41-60 days and have not yet accepted (accept the flag = N)ageing count Percentage 0-20 days 1 10%(this will offcourse depend on the total number of opty id and then out of that how many did not accept within the given period. 21-40 days 0 0% 41-60 days 0 0%
Any help please.
Thank you
RyanI get other results
with t as (select 1 as opty_id, to_date('01/03/2013','DD/MM/YYYY') as date_created, 'ryan' as auser, 'N' as accepted_flag from dual union all select 2, to_date('02/03/2013','DD/MM/YYYY'), 'sun', 'Y' from dual union all select 3, to_date('03/02/2013','DD/MM/YYYY'), 'sun', 'Y' from dual union all select 4, to_date('02/01/2013','DD/MM/YYYY'), 'ryan', 'N' from dual union all select 5, to_date('03/01/2013','DD/MM/YYYY'), 'tom', 'Y' from dual) select decode(grp,1,0,grp*20-19) ||'-'|| grp*20 ageing ,sum(case accepted_flag when 'N' then 1 else 0 end) count ,sum(case accepted_flag when 'N' then 1 else 0 end) /sum(sum(case accepted_flag when 'N' then 1 else 0 end)) over () Percentage from (select ceil(decode((trunc(sysdate) - date_created),0,1,trunc(sysdate) - date_created)/20) grp ,date_created ,accepted_flag from t ) group by grp AGEING COUNT PERCENTAGE "0-20" "1" "0,5" "21-40" "0" "0" "41-60" "0" "0" "61-80" "1" "0,5"
Published by: chris227 on 04.03.2013 03:41
Modified according to response below -
How to find the numbers and make it more 1
Hello world
I want to find a group of numbers in my selection, and then do it + 1
for example:
elderly (\d\d)
I want to do is + 1
and
201 (\d)
I want to do is + 1
What is the syntax?
Thank you
VK
Hi, VK,.
Try this. It looks up the number in the selection and added, for example, finds it "(20) years", "201 (2)" and will replace it for "elderly (21)", 201 3 respectively.
var _selection = app.selection[0]; app.findGrepPreferences = changeGrepPreferences = null; app.findGrepPreferences.findWhat = "(aged) (\\(\\d\\d\\))"; var found = app.selection[0].findGrep(); for(var i=0;i
Kind regards
Cognet
-
my iphone 6s more is locked - I can't get into my phone - I don't know not my password - I tried - it puts a square around the numbers of password - it say I need my fingerprints to do - I have try - it does not work - what should I do to get into my iphone 6?
This means that you are likely to not put in the correct access code. If you never restart the device, you will need to put in the code for the first time, then later, you can use your fingerprint again.
If you remember the password, you can then follow these instructions.
-
need help with the code 646 error and unltimat of vista running 64-bit... Let me know what you need to know to help. Thank you...
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
How to find the numbers and make it more 34
Hi, dear friends
I want to find a group of numbers in my selection and then make it + 34
for example: \d\d\d p. & p.
I want to do is + 34
My code below
var _selection = app.selection[0]; app.findGrepPreferences = changeGrepPreferences = null; app.findGrepPreferences.findWhat = "p. \d\d\d"; var found = app.selection[0].findGrep(); for(var i=0;i<found.length;i++) { app.findGrepPreferences = changeGrepPreferences = null; app.findGrepPreferences.findWhat = "p. \d\d\d"; var foundnum = found[i].findGrep(); var newnum = parseInt(foundnum[0].contents) + 34; app.changeGrepPreferences.changeTo = newnum.toString(); found[i].changeGrep(); } alert ("Done")
I think that my formula is wrong? Please a friend advice.
Thanks in advance.
Hello
Change the '-' in regex with ' \' as below, try the code,
_selection var = app.selection [0];
app.findGrepPreferences = changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "% \\d\\d\\d";
var found = app.selection [0] .findGrep ();
for (var i = 0; i)<>
{
app.findGrepPreferences = changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\d\\d\\d";
var foundnum is found [i] .findGrep ();.
var newnum is parseInt(foundnum[0].contents) + 34;.
app.changeGrepPreferences.changeTo = newnum.toString ();
Found [i] .changeGrep ();
}
Alert ("Done")
-
In the past (10 years and more) I could have sworn that when I cut a shape with a fill the filling would leave, feel that a form that was not closed could not have a fill... all of a sudden when I cut a form and he says not closed, he still keeps filling. I had a stroke... it was always this way or did, I hit a button command that I've never seen before! Help
When FH imports an Illustrator's document shows fills to open paths imported as Illustrator.
If you want to remove the fill of these paths, you must set the fill to 'none '.
Open newly created curvilinear fillings are controlled by preference
Preferences > object > see fill it open avenues.
I suspect that this verified by accident.
-
HP J4680: how to enter the numbers and letters of wpa
I have no trouble to enter the letters of WPA, but my WPA also has a number, how should I enter a number?
Continue to press the same key again and again and watch the magic.
-
Helps the RichList and managers for a new Blackberry developer
Hi all, I searched through the blackberry Quick reference Guide as well as the API on get a RichList to work in my application. However, I'm not entirely sure how Managers are used (I'm building my little app using the latest version of the BB SDK, 7.1). Here is my code (Simplified): http://pastie.org/4163177
Basically, my screen pushes this full screen and it provides a Manager. I did this is because getManager() did not work (getManager() returned null, so I got an error), so I pushed the Director of the screen through. Now my list does not appear on the screen. So my question is: how to use managers, and how do I get my RichList appears?
using menuManager which was transmitted through my screen:
using getManger():
A handler can be added to a single screen. Try to use your screen in your full screen Manager (or any instance of another screen) will not work. I recommend reading this guide on the managers. Let us know if you have any questions after checking that.
-
create or replace procedure Dynamic_Table AS
iVal VARCHAR2 (32);
iTemp varchar (200): = ";
sql_stmt VARCHAR2 (200);
l_file1 UTL_FILE. TYPE_DE_FICHIER;
l_file utl_file.file_type;
BEGIN
l_file1: = UTL_FILE. FOPEN ('TEST', 'dinput.txt', 'R');
EXECUTE IMMEDIATE ' CREATE TABLE baseline (Item_ID varchar2 (32))';
Loop
BEGIN
UTL_FILE. GET_LINE (l_file1, iVal);
EXECUTE IMMEDIATE ' insert into baseline values (: ival) "using ival;
EXCEPTION
WHEN No_Data_Found THEN EXIT;
While some OTHER THEN dbms_output.put_line (SQLERRM); * /
END;
end loop;
END;
You are approaching this the wrong way. Create an external table based on the file. External tables are CSV, fixed width data in a queryable table.
You will need to create an oracle directory to put the file in (MY_ORA_DIR) I leave it for you to do, and then perform the following...
create table BASELINE)
ITEM_ID varchar2 (32)
)
EXTERNAL ORGANIZATION
(
TYPE ORACLE_LOADER
THE DEFAULT DIRECTORY MY_ORA_DIR
ACCESS SETTINGS
(
RECORDS DELIMITED BY NEWLINE
LOGFILE "dinput.log".
BADFILE "dinput.bad."
NODISCARDFILE
FIELDS
(
ITEM_ID
)
)
LOCATION ("dinput.txt")
)
REJECT LIMIT UNLIMITED
/
All the dubious records appear in dinput.bad. Dinput.log will give you information.
External tables are read-only, so once you set up your file, you can create editable as a normal table.
create table ITABLE_EDITABLE as
Select * from BASELINE
/
Work done, a few lines of code.
Maybe you are looking for
-
Update Radeon Mobility graphics cards
As you have probably found ATI are not very next with new mobility drivers. The good news is that with a slight modification of the Catalyst drivers normal can be used, follow this link for instructions: http://forums.extremeoverclocking.com/showthre
-
Upgrade of RAM for Satellite L30
I m hard to find part of the ram that I can use with my computer. I put t really know how to move in the Toshiba site! My laptop is: Toshiba Satellite L30-10 x.I would like a 1 GB module to make the maximum of available Assembly 2 GB. He must be rele
-
When I opened Help & Support in Windows XP Pro, the index is empty.
Help Support &. No error msg. It opens but the index is empty. CUD may be hidden (by chance) and do not know how to view the files.Would appreciate any help
-
Problem with update of Intel for Intel (R) Wifi Link 5100 AGN driver
Hello I have Windows Vista, Office 2007, and when I download the update recommended above makes my Internet become very reliable. Some Web pages is not affected, but some will not work. There is no obvious reason why this is the case for all advice w
-
How to transfer several photos from one folder to another
I want to delete a number of photos in my folder and then transfer some blocks of them to other folders to better organize. I know how to remove one at a time, but I don't know how to highlight a bunch of them for moving. They are coming up with num