Problem with update of Intel for Intel (R) Wifi Link 5100 AGN driver

Similar Questions

• Cannot start the HP Pavilion dv7 - Intel(r) WiFi Link 5100 AGN

  the WiFi has been disabled by the Device Manager, and I can't activate it

  When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on "Find solutions", it displays 'could not load driver software' and no solution appears

  I tried the function "update driver" and still no idea to him.

  not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is

  Thank you!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same question so you must call HP tech support and get the replacement of the part.

• Intel(r) WiFi Link 5100 AGN installed in a Studio 17/1745

  I recently lost network connection using the-built in Intel(r) WiFi Link 5100 AGN. Stupidly, it happened while I was still under a contract of Service, but because of the holidays, I turned it off and the contract expired in mid-December.  I have a Studio 17/1745, I disconnected the internal WI - fi card and use an N of D-Link USB and I now have a WI - fi connection. Should I buy a new internal WiFi card and if so than that.

  met100,

  Places to look to see if your connection is activated

  What program anti-virus and firewall are you using? I see virus program lead to problems of connections.

  Can you run system information search REMOVE YOUR PRODUCT ID and OWNER REGISTERED, if you use XP, run an ipconfig/all log and post it here.

  Rick

• problem of Intel(r) Wifi Link 5100 AGN WiFi modem

  I have the modem title in my laptop that I inherited from my sister. I got home and it does not connect. I ran a diagnostic and it says that there is a problem with the driver. I did the update and represented the diagnosis. Same thing is happening. I went to Device Manager and not the diagnosis, and he says: I use the highest driver so far and that the modem is working properly.

  Help! A diagnosis says it does not work, it says it does. What should I do here? Any help would be appreciated!

  Hello

  Thanks for posting in Microsoft Community!

  What is the exact error you receive when you try to connect?

  You can uninstall and reinstall the drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact the manufacturer for the latest drivers.

• Low speed Intel(r) WiFi Link 5100 AGN - Satellite L500-128

  I bought Toshiba Satellite L500-128 and have already 300N Sitecom Wireless Router

  The new laptop has a wireless lan card with the 802-11 Draft-N support
  I don't know the speed of my new laptop buth is continue about 48 / 54 Mbps

  I have a second computer with a supported 802-11 Draft-N Wireless card and works very well with speed more than 136Mbps

  I tried several things to change in the configuration of the card wireless buth without any results.

  Does anyone have an idea? How to solve this problem?

  Thank you
  Richard

  Hello

  Check if the wireless network adapter using the Draft N standard.
  You can choose this in Device Manager-> properties-> Advanced tab WLan card

  As far as I know that the WLan card is Intel 5100AGN.
  Check if an update of the WLan driver would also help

  Welcome them

• HP ProBook s 4710: Bluetooth missing on HP ProBook 4710 s (Windows 7 64-bit) - Intel WiFi - Link 5100 AGN

  Hello

  I have a strange problem:

  I have two HP ProBook s 4710 here in front of me. The two "seems" to have the same hardware inside (I don't see any difference on the stickers in the back).

  I have install both of them with the same USB with Windows 7N 64-bit.

  After the installation is complete (no additional driver installed).

  the first bluetooth ProBook has

  the second bluetooth ProBook has NO!

  I checked the BIOS, every two active a bluetooth settings on both.

  WLAN works on both.

  On the first s I can also install the bluetooth drivers latest, on the second, I can't. Always the message occurred ("no device was detected. Make sure that... »).

  Device Manager indicates, the two ProBooks Intel WiFi - Link 5100 AGN, the first s also Bluetooth-device listed, the second of not.

  What the hell is going on here?

  Hello:

  It is very strange because the HP Wireless Assistant software is registered directly on the support page and driver 4710 under the solutions section.

  If this is the case, try the latest HP Connection Manager software which does the same thing the software assistant wireless.

  Here's the theory behind your dilemma (except radio BT died).

  This laptop once had the connection manager (since the software assistant Wireless does not) installed, and you can use this software to individually disable bluetooth or devices rather than using the wireless button wireless.

  I guess that for example, turn off the stereo bluetooth with the connection manager to save a small amount of battery power, which increases the time before having to recharge the battery.  But you can still use the wireless.

  The hardware button turns both off the coast.

  The big problem is...

  If none of these devices are turned off by the wireless assistant or the connection manager software and that you reinstall the operating system or to update or other, wireless or bluetooth devices do not appear in the Manager of devices as if they are dead or don't exist.

  And what makes this more puzzled, is that if you check the BIOS, you will see that they are present and active!

  The only way to make them work again, is to turn them on by using the Deputy Director or the wireless connection software.

  This is why it is absolutely essential to ensure that these devices have been turned on before you reinstall the operating system.

  For those people that upgrading to W10, none of these programs work on W10, so if the BT has been disabled, the user must return to W7, activate the bluetooth, uninstall the connection manager or the wireless assistant software, reboot, ensure that the device is always on and then upgrade to W10.

  Here is the link to the software of the support page for your laptop connection manager...

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53394.exe

  If this doesn't work or the other, I suspect that the BT module does not work (all hardware failures).

• Problem with update of security for Windows XP (KB973768)

  My system is Windows XP Media Center Edition version 2002 with SP3 and I've had problems with KB973768 for awhile now and I've done everything. I used the "MS Fix it" software and it wasn't able to do anything. I tried to install it manually and I get this message whenever I try "Setup has encountered an error: Setup cannot continue because one or more prerequisites necessary for the installation of KB973768 failed.» For more details, check the c:\windows\KB973768.log log file'

  Reading the newspaper, it seems that it has something to do with Media Center, whom I have problems with ehshell.exe, in addition to this, but do not know whether or not it relates. Anyway here is the link to the post here I asked who submit click here

  I'll be very grateful if this problems can be solved.

  The newspaper reads:

  [KB973768.log]
  2.938: ================================================================================
  2.938: 09/12/2011 23:24:35.062 (local)
  2.938: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  2.969: impossible to activate SE_SHUTDOWN_PRIVILEGE
  3.031: hotfix started with following command line: - q - z - er /ParentInfo:24420ae31ab21e47aba2083273c1a6f9
  3.063: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  3,516: return value of IsMediaCenterPC = 1
  3,516: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  3,516: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  3,516: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  3,516: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  3.531: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  3.531: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  3.531: Check condition for line 2 of prerequisite returned FALSE
  3,641: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3,641: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  3.703: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.703: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  3.703: Update.exe extended error code = 0xf0f4
  0.047: ================================================================================
  0.047: 09/12/2011 23:37:05.093 (local)
  0.047: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  0.047: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0.047: hotfix started with following command line: - q - z - er /ParentInfo:a26bbd9947135e40bf0120f81249c59d
  0.047: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.062: return the value of IsMediaCenterPC = 1
  0.062: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.062: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: Check condition for line 2 of prerequisite returned FALSE
  0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.062: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.062: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.062: Update.exe extended error code = 0xf0f4
  0.079: ================================================================================
  0.079: 09/12/2011 23:42:35.062 (local)
  0.079: g:\2d3e53d0171f7240a9b33c76814c\update\update.exe (version 6.3.13.0)
  0.079: hotfix started with following command line:
  0.079: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0,141: return the value of IsMediaCenterPC = 1
  0,141: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0,141: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0,141: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,141: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,141: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,141: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,141: Check condition for line 2 of prerequisite returned FALSE
  0,141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,141: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0,141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,141: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  22.422: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  22.422: user input: OK
  22.422: Update.exe extended error code = 0xf0f4
  22.422: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
  0.078: ================================================================================
  0.078: 09/12/2011 23:43:08.703 (local)
  0.078: g:\19f0871e5f3390545f21\update\update.exe (version 6.3.13.0)
  0.078: hotfix started with following command line:
  0.078: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.125: return the value of IsMediaCenterPC = 1
  0.125: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.125: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.125: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.125: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.125: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.125: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.125: Check condition for line 2 of prerequisite returned FALSE
  0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.125: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.125: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  3.938: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  3.938: user input: OK
  3.938: Update.exe extended error code = 0xf0f4
  3.938: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
  0.078: ================================================================================
  0.078: 09/12/2011 23:50:00.765 (local)
  0.078: g:\efcac2da495c5681649bbb0931e188ab\update\update.exe (version 6.3.13.0)
  0.078: hotfix started with following command line:
  0.078: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.156: return the value of IsMediaCenterPC = 1
  0.156: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.156: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.156: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.156: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.156: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.156: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.156: Check condition for line 2 of prerequisite returned FALSE
  0.156: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.156: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.156: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.156: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  2.390: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  2.390: user input: OK
  2.390: Update.exe extended error code = 0xf0f4
  2.390: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
  0.062: ================================================================================
  0.062: 09/12/2011 23:53:35.078 (local)
  0.062: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  0.062: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0.062: hotfix started with following command line: - q - z - er /ParentInfo:e1af80918c7c3647ac8bf32656674b10
  0.062: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.078: return the value of IsMediaCenterPC = 1
  0.078: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.078: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.078: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.078: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.078: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.078: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.078: Check condition for line 2 of prerequisite returned FALSE
  0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.078: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.078: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.078: Update.exe extended error code = 0xf0f4
  0.062: ================================================================================
  0.062: 09/12/2011 23:55:39.078 (local)
  0.062: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  0.062: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0.062: hotfix started with following command line: - q - z - er /ParentInfo:1ab7c07acdd60748bb5cdab1da30d925
  0.062: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.062: return the value of IsMediaCenterPC = 1
  0.062: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.062: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: Check condition for line 2 of prerequisite returned FALSE
  0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.062: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.078: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.078: Update.exe extended error code = 0xf0f4
  0.094: ================================================================================
  0,110: 2011-12-10 00:03:56.187 (local)
  0,110: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  0,110: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0,110: hotfix started with following command line: - q - z - er /ParentInfo:108421735f40f94ab5b1fa36d03364ec
  0,110: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0,110: return the value of IsMediaCenterPC = 1
  0,110: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0,110: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0,110: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,110: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,110: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,110: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,110: Check condition for line 2 of prerequisite returned FALSE
  0,110: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,110: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.125: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.125: Update.exe extended error code = 0xf0f4
  0.047: ================================================================================
  0.047: 2011-12-10 00:15:31.765 (local)
  0.047: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  0.047: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0.047: hotfix started with following command line: - q - z - er /ParentInfo:a836904d171d054a9105353041d24dfb
  0.062: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.062: return the value of IsMediaCenterPC = 1
  0.062: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.062: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.062: Check condition for line 2 of prerequisite returned FALSE
  0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.062: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.062: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.062: Update.exe extended error code = 0xf0f4
  0.141: ================================================================================
  0,141: 10/12/2011 11:28:16.421 (local)
  0,141: C:\WINDOWS\SoftwareDistribution\Download\519039965b9b1c75e6fe81698d853607\update\update.exe (version 6.3.13.0)
  0,141: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0.157: hotfix started with following command line: - q - z - er /ParentInfo:5a0a1480332b504299b1ddd3cb9afff6
  0.157: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0.157: return the value of IsMediaCenterPC = 1
  0.157: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0.157: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0.157: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.157: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.157: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.157: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0.157: Check condition for line 2 of prerequisite returned FALSE
  0,172: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,172: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0,172: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,172: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0,172: Update.exe extended error code = 0xf0f4
  0.250: ================================================================================
  0.250: 2011-12-10 11:42:55.437 (local)
  0.250: f:\0133fe92e334b0b8457e\update\update.exe (version 6.3.13.0)
  0.250: hotfix started with following command line:
  0,265: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  0,843: return the value of IsMediaCenterPC = 1
  0,843: IsMediaCenterPC returns the value (0 x 1) that is equal to 0 x 1
  0,843: condition succeeded to the PreReq.SingleOp.MediaCenter section in row 1 prerequisites
  0,843: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,843: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,843: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,843: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,843: Check condition for line 2 of prerequisite returned FALSE
  0,859: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,859: KB973768 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file
  0.875: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0.875: Setup cannot continue because one or more prerequisites required for the installation of KB973768 failed. For more details, check the c:\windows\KB973768.log log file

  This issue is now resolved.

  I'm not sure how, but I think it had something to do with a question I had with ehshell.exe (click here for more on this topic). KB973768 has something to do with Media Center, and given that I had problems with it, it did not cross the installation of this update. Once the ehshell.exe issue has been resolved, I was able to install this update.

• problem with update of definition for Microsoft Security Essentials - KB2310138 (definition of 1.107.455.0)

  Since last week, I get a notification for the above security update. I have send to update and its success, but then low and behold, the next day I got a new update notification.

  idk if I'm missing something, or if there is some kind of problem with this update. any advice you could offer would be greatly appreciated. Thank you.

  E-mail address is removed from the privacy *.

  Hi bettybaby,

  The definition was updated daily and new definitions of the security essentials is installed. This is the reason why he sees the update every day. Its normal and nothing to worry about.

• KB 915597 Def 1.71.26.0 updated - immediate problem of connection to the network; Intel WiFi Link 5100 AGN is present, "working properly", but "there is no network to connect to."

  My "update journal" indicates that this definition has been installed at 05:47 (Saturday 111/21), the same moment where pages failed to load and the small icon of net showed no link. (I had fortunately been web surfing until - filled bars.)

  This is an update "cannot be uninstalled." I did a restore of the system to the previous Thursday, and then to the previous week, without change in condition. . I powered completely off and on again several times, without success.

  There is a note on the update for http://go.microsoft.com/fwlink/?LinkId=52261 - who takes me to a page with a bunch of stuff on the installation of a BizTalk adapter. (snippet below included) This is way beyond my ability to understand... I DON'T know how to edit the registry, but I don't know what to change, if this ' even common sense.

  The update could have messed with the IP addresses?

  I tried net diagnostics ("no network to connect to"); I tried to add a new network - the 'check' the devices window just sits there...

  (Yes, my other devices connected wireless - works perfectly.) The computer has not been moved from its site)

  (This is a piece of the message I get from the url above)
  "You can use the BizTalk for MSMQ adapter and adapter BizTalk Message Queuing on the same computer. However, given that these two adapters use the same port, you must add an IP address to your computer as BizTalk adapt for MSMQ can use. »

  [1] I bought the Dell in August as 64-bit extensible and Dell sent me a Win7 disc...

  [2] indeed, McAfee came with the machine as a trial version...

  [3] I think I might start by reinstalling the Win7 update...

  A1. The Dell computer came with Vista 64-bit SP1 edition? [Yes/No]

  A2. Your current McAfee application is supported in Windows 7 64 bit? [Yes/No]

  If the free trial version of McAfee is always installed, when the free trial period expire?

  If you have purchased McAfee application, did you do before the expiration of the free trial period?  [Yes/No]

  You never downloaded & run a utility named McAfee Consumer Product Removal Tool? [Yes/No]

  A3. Please do not confuse the upgrade your version of Windows with 'update your computer' (e.g. Windows Update), especially in these forums.

  If you've upgraded to Win7 64-bit, you can't "start over by reinstalling the Win7 [upgrade]." If you want to reinstall Windows, you need to reinstall Vista SP1, and then reapply the upgrade to Win7.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with updates of security for MS Office Outlook 2003 (KB973705) and the Outlook junk mail filter (974771 KB)

  I had problems trying to install the update of security for MS Office Outlook 2003 (973705 KB) and update for MS Office Outlook 2003 Junk e-mail filter (974771 KB). I get the error code 646.

  First of all. What is this code? I looked around and could not know what it means. In the second place. I neither use or as Outlook and would like to know short of reinstalling Office, how can I disable / remove Outlook or disable updates for it?

  Hello rwhard, welcome.

  My suggestion would be to insert your disk in Microsoft Office, and then try to perform an automatic repair. Try this:

  1. click on START
  2. click on "Control Panel."
  3. double-click on "programs & features".
  4. click on "Microsoft Office...". "and select Edit
  5. Select "repair".... "in the context menu and go through the wizard
  6. after the repair, restart your computer and try to update again

  If this does not work, I would say that simply hide you the update if you are not using Outlook.

  1. click on START
  2 type "Windows Update" (without the quotes) and press enter
  3. search for updates, and then click to view will want as an option so that you can manually select the updates to be applied
  4 right-click the two updates, then select "hide."
  5. There is no button apply, so it just close the window, and then restart your computer

  Let us know if it works,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Alternative to wireless Intel Wifi Link 5100 AGN card?

  I find that my Intel 5100 AGN wireless network card does not work as well as he used to.  I tried everything... even the drivers are perfectly up-to-date.  But I keep losing the connection to my wireless router, even if the strength of connection between 3 and 4 bars.  I find that I rarely make me fall if I have 5 bars.  But if it drops to 3, I get periodically fall any wireless network that I use.

  I want to replace this card by something better, but of course compatible with the HP dv5 (my specific model is dv5t-1000).  Any recommendations?

  "If you keep an open mind, life will give you more opportunities."

  Hi, Gary:

  What I meant by my statement about you have the best of the cards available for your laptop is that, Yes, I'm sure that the Intel 5300 is an improvement on the 5100, but the problem is that you can not install the 5300 in your notebook.

  The Intel 5300 is not supported (only the numbers of cards/coins listed in the service manual can be installed) and your laptop wouldn't start until you have removed the card.

  You can try another card in the manual, if you wish.

  However, you are limited to the:

  4322 Broadcom 802.11a/b/g/n WLAN module

  Broadcom BCM4312 802. 11 b / module g WLAN (not a N Wireless card)

  I guess you can use an external USB adapter, but I would like to get one with an external antenna connected to him, because I would have to believe that installing wire of 3 antenna in your address must provide superior reception on a simple USB wireless adapter with an internal antenna as its single antenna.

  The antennas go all the way to the top of your screen.

  Tinker you with advanced network adapter settings?  They can be found by clicking on the card in the Device Manager, click the Advanced tab.  Take note of where the parameters are now so if something is buggy, you can change their return.

  Here is a guide to the advanced settings that you have and the recommended settings for them.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025393.htm

  Paul

• Problems with the NIC Intel N 7260

  I have a 15 HP Pavilion age of 4 week t-n200 laptop is Windows 8.1.64. I'm having a problem with the NIC Intel N 7260. All of a sudden the laptop will show it does not connect to all networks. It will show a yellow triangle on it and will not connect to any network adapters. I tried to "roll back driver" and who worked initially, but now he has started with the yellow triangle and lost functionality. Now "roll back driver" is grayed out and is not an option. However, there is no update available. It currently shows pilot 16.10.0.5. It displays the code 43 under Details of the device. Other computers home connect well to the internet currently.  Please advise, thank you!

  Hi junebug07110,

  Welcome to the HP Forums!

  I'm sorry to hear that you have a problem with your Intel N 7260 network card.  I'll try my best to help you solve this problem!

  I suggest you reinstall the driver for Driver Intel 7260/3160 Wireless LAN.  Follow the procedure in this document using Recovery Manager to restore the software and drivers (Windows 8) restore the driver.  The steps are the same for Windows 8.1.

  I hope this information is useful. Please let me know how it goes, I'll wait for your answer.

  Thank you and have a great day!

• Intel Wireless WiFi Link 4965AGN with Inspiron 1525 problems

  I have Inspiron 1525 + 8.1 Windows + Intel Wireless WiFi Link 4965AGN (Intel last driver for Windows 8). If I set the off mode N card wifi, wifi is more slow (54 Mbit/s), but stable. If I turn N (enable) mode, wifi is fast 144 Mbps, but becomes unstable - often (few minutes) disconnects, the disconnection of the card shows a lack of drivers, you cannot reconnect to the router, you must restart your computer. Another computer - Dell Studio with pre-installed map 5100 is stable under the N on my home network. Dell officially submitted the 4965AGN card is compatible for Inspiron 1525. Is it possible for stable operation in N mode?

  waltur,

  I'm glad to hear that you were able to find a solution to your connection problem. Thanks for posting back.

  Take care

  Rick

• problems with update iOS 9.3 car bluetooth

  problems with update iOS 9.3 car bluetooth. break and cannot hear the caller voice calls.

  In what seems to be the same problem, this AM. iPhone 6, iOS 9.3, its stock of 2012 Honda Odyssey system. Worked well with iOS 9.1. With iOS 9.2 bluetooth would be occasionally disconnect, then reconnect about 5-10 seconds later. Reset all the settings bluetooth both phone and car with no improvement.

  IOS installed 9.3 last night. Phone connects, but the audio is unintelligible. Sound cut about every quarter of second, then reductions for about a quarter of a second, ad nauseam. Reset the phone without effect. Will try other things later today, but the phone is unusable with bluetooth, as is.

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K