Helps to resolve the error sass.exe - application application faild to initialize properly (oxcoooo142)

Similar Questions

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...

• I need help, how to fix error engine.exe - application

  Engine.exe - Application Error

  The exception unknown software exception (0xc0000417) occurred in
  the application at location 0x094ff9a7c.
  Click OK to terminate the program

  Hi Soeslam,

  1. what program are you trying to install?

  2. when exactly do you get this error message?

  You can choose a different location to install the program. You can install in C: drive itself rather install in C:\Program files and check if that helps.

• helps to resolve the error

  Hai friends,
  When I run a project in netbean IDE I get the error:
  
  
  
  F:\Resource Allocation of Cluster Computing is not a valid directory
  at org.apache.tools.ant.taskdefs.Java.setupWorkingDir(Java.java:848)
  at org.apache.tools.ant.taskdefs.Java.setupExecutable(Java.java:818)
  at org.apache.tools.ant.taskdefs.Java.fork(Java.java:781)
  at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:211)
  at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:132)
  at org.apache.tools.ant.taskdefs.Java.execute(Java.java:105)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.GeneratedMethodAccessor133.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.GeneratedMethodAccessor133.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:394)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.GeneratedMethodAccessor133.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.Target.execute(Target.java:357)
  at org.apache.tools.ant.Target.performTasks(Target.java:385)
  at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
  at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
  at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
  at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
  at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:278)
  at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:498)
  at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
  Result of Java:-1
  BUILD successful (total time: 0 seconds)
  
  
  
  Please help me solve this problem

  The directory exist?

  What output you get when you open a command prompt window and type

  C:\> dir "F:\Resource Allocation for Cluster Computing"
  

• Need help to resolve the error - below the SQL statement to execute cannot be

  Below is my CO as, which creates a callable statement.
  
  try {}
  OAApplicationModule oaapplicationmodule = (webBean) pageContext.getApplicationModule;
  OADBTransactionImpl t = (OADBTransactionImpl) oaapplicationmodule.getOADBTransaction ();
  OracleCallableStatement proc = (OracleCallableStatement) t.createCallableStatement (lquery,-1);
  proc. Execute();
  t.Commit ();
  
  
  }
  catch (SQLException sqlexception)
  {
  throw OAException.wrapperException (sqlexception);
  }
  
  
  
  
  After the execution of the page, get the below error... (Please find below stack error)
  
  I have referred the development guide but did not get something useful.
  
  Please give me clues about the same.
  
  Raghu cordially
  
  -- Error Stack ---------------------------------------------------------
  
  Error page
  
  
  Details of the exception.
  
  oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: Houston-27123: SQL error in the preparation of the call statement. Statement: null
  at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
  at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2637)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
  in OA. jspService(OA.jsp:40)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
  at java.lang.Thread.run(Thread.java:534)
  # # 0 in detail
  java.sql.SQLException: the SQL statement to execute cannot be empty or null
  at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
  at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
  at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
  at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java:1138)
  at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java:1054)
  at oracle.jbo.server.DBTransactionImpl.createCallableStatement(DBTransactionImpl.java:3033)
  at cisco.oracle.apps.xxchr.element.server.webui.XXCHRElementSetSearchCO.processFormRequest(XXCHRElementSetSearchCO.java:343)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:799)
  at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
  at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1118)
  at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
  at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
  at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
  at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
  at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
  at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2633)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
  in OA. jspService(OA.jsp:40)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
  at java.lang.Thread.run(Thread.java:534)
  java.sql.SQLException: the SQL statement to execute cannot be empty or null
  at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
  at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
  at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
  at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java:1138)
  at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java:1054)
  at oracle.jbo.server.DBTransactionImpl.createCallableStatement(DBTransactionImpl.java:3033)
  at cisco.oracle.apps.xxchr.element.server.webui.XXCHRElementSetSearchCO.processFormRequest(XXCHRElementSetSearchCO.java:343)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:799)
  at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
  at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1118)
  at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
  at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
  at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
  at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
  at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
  at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
  at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2633)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
  in OA. jspService(OA.jsp:40)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
  at java.lang.Thread.run(Thread.java:534)
  
  Published by: Rambeau on Oct 14, 2010 02:58

  check the code stuck by me again

  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  Connection conn = oaapplicationmodule.getOADBTransaction().getJdbcConnection(); //Right one
  

  Thank you
  -Anil

• "Msiexec.exe application failed to initialize properly (0xc0000142) click on ok to close the application. __

  What is this and why aren't I see this once in a while?

  Hello

  Welcome to the Microsoft Answers Forum!

  Please provide us with more information.

  (a) on the computer what operating system do you use?

  (b) when exactly do you get this error message?

  Make sure that the windows service install is running on the computer.

  Steps to start the Windows Installer service:

  1. Click Start, type Services.msc and press ENTER

  2. double-click on Windows Installer

  3. set the automatic startup of Windows Installer type / Manual

  4. Click Start to start the service.

  5. apply the settings.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• How solve this error message application failed to initialize properly 0xc0000005 on start up

  Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message

  (application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!

  Hello

  You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.

  (a) use the Recovery Console, which is described in the article below.
  http://support.Microsoft.com/kb/314058

  Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,

  (b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
  Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dll

  Note: Where d: is the CD-ROM drive

  (c) then type EXIT and when the pc reboots, you should be able to boot XP.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a message "error autorun.exe - application the application could not initialize properly (oxc0000135). Can someone please make all suggestions?.

  I am trying to install a game via a DVD and get a message "autorun.exe error - application that the application failed to initialize properly (oxc0000135) click on ok to close the application. I use Windows XP. Anyone would please any suggestions to fix this? Thank you kindly.

  Hi Matt,

  Thanks for the reply.

  I really apologize to provide suggestions evil as menitoned in above post about Windows 8.

  Method 1: I suggest you to consult and post the thread in the forum link and check if it helps.

  http://forums.CivFanatics.com/showthread.php?t=173648

  http://forums.CivFanatics.com/forumdisplay.php?f=144

  Method 2: If the problem persists, I suggest you to contact the game manufacturer for assistance.

  I hope this helps. If you have questions about Windows, I suggest you post in the Microsoft Community. We will be happy to help you.

• lsasss.exe - application error "the application could not initialize properly (0xc0000006).

  Hi I was wondering if someone out there could help,

  My laptop is a packard bell Windows xp, when I turn on the laptop it does not completely load, it will take me to a black screen with the error message error lsasss.exe - request "the application could not initialize properly (0xc0000006). Click OK to close the application. But when I click ok nothing happens except disappears from the message bar and im left with a black screen. can someone tell me what to do?

  Hi beavarney,

  ·        Do you remember any changes made on your computer before the show?

  Security Authority Subsystem Service LSASS (local), is a process in Microsoft Windows operating systems that is responsible for enforcing the security policy on the system.

  Method 1:

  I suggest to start the computer in safe mode, you can check the link for the steps below: a description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Method 2:

  If you are unable to start the computer in safe mode then try last known good configuration. Link: How to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Implementation error "the application BTTray.exe does not able to initialize properly" soon after connecting to Vista Premium 32 bit. Same error when you try to connect to Citrix, "the wfcrun32.exe application could not initialize correctly.

  On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
  Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
  My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
  Is could someone please help me get rid of these annoying errors?

  I came across a similar story, while answering a different question, earlier today.  It seems to involve Dell machines and a corrupt file of the MFC80.dll.  If it's useful to you or not, I'm not sure, in any case, you would like to read this link.

  2.0 secure Local data RMCPlg.exe and BTTray.exe errors
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en

  The previous post, I referred to was this one.

  The Groove application error
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• "ibrytdesktop.exe. the application failed to initialize properly (0xc0000135)" when the computer is turned on.

  Original title: need help please

  Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix

  Hi petrospapamihelakis,

  Looks like one of the installed program on the computer has been corrupted.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you get the error.

  Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

• Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

  I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

  PxShare.exe Application error.

  The application failed to initialize properly (0xc000135).  Click OK to close the application.

  It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

  I don't know if the two problems are related or not.

  Thanks for any help!

  Hi Lowery619,

  (a) If you have external devices unnecessary connected to the machine, unplug them.

  (b) thereafter, you can try reinstalling Windows XP.

  For more information, please visit this link: install, reinstall, or uninstall Windows

  Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Receive the Error Message"this application has requested execution to terminate in an unusual way" when starting

  Original title: when I connect I get this message

  "This application has requested the execution to terminate in an unusual way."

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  Hope this information helps.