Similar Questions

• Need help with the presentation of the trace file

  Hello
  
  I need to understand
  
  -the large number of fetch for the query
  -SQL * Net message to client and SQL * Net message from the clientbeing even
  -locking: cache buffers chains
  
  The question I have is a delay of 6 x for some reason.
  
  Can someone help me?
  
  Thank you
  D
  
  -----
  
  SQL
  
  SELECT R_RO.*
  Of
  (SELECT b.ID, b.ANSWERS, b.C_CLASSID, b.C_ID, b.FCI, b.FROM_ID, b.TCI, b.TO_ID, b.FFU, b.TFU, b.NOU, b.ISN, b.SC_NAME,
  b.DN_NAME, b.DN_ITEM_NUMBER, b.ISC, priority of THE VVP. B RELATIONSHIP WHERE b.ID NOT IN (SELECT / * + HASH_AJ * / SDE_DELETES_ROW_ID OF VVP.) D94 WHERE DELETED_AT IN (SELECT l.lineage_id FROM SDE.state_lineages WHERE l.lineage_name = l: source_lineage_name AND l.lineage_id < =: source_state_id) AND SDE_STATE_ID
  =: 'SYS_B_0') UNION ALL SELECT a.ID, a.ANSWERS, a.C_CLASSID, a.C_ID, a.FCI, a.FROM_ID, a.TCI, a.TO_ID, a.FFU, a.TFU, a.NOU, a.ISN, a.SC_NAME, a.DN_NAME, a.DN_ITEM_NUMBER, a.ISC, a.PRIORITY IN THE PSV. A94 has, SL SDE.state_lineages WHERE (a.ID, a.SDE_STATE_ID) NOT IN (SELECT / * + HASH_AJ * / SDE_DELETES_ROW_ID, SDE_STATE_ID OF VVP.) D94 WHERE DELETED_AT IN (SELECT l.lineage_id FROM SDE.state_lineages WHERE l.lineage_name = l: source_lineage_name AND l.lineage_id < =: source_state_id) AND SDE_STATE_ID >: 'SYS_B_1') AND a.SDE_STATE_ID = SL.lineage_id AND SL.lineage_name =: source_lineage_name AND SL.lineage_id < =: source_state_id) R_RO WHERE (ID =: "SYS_B_2")
  
  -----
  
  call the query of disc elapsed to cpu count current lines
  -----
  Parse 3911 2.30 2.14 0 0 0 0
  Run 3911 2.47 2.43 0 0 0 0
  Search 3911 268.96 270,60 28 15696558 0 3911
  
  Total 11733 273.73 275,18 28 15696558 0 3911
  
  Chess in the library during parsing cache: 1
  Optimizer mode: FIRST_ROWS
  The analysis of the user id: 1031
  
  Rows Row Source operation
  -----
  1 VIEW (cr = 3966 pr = 0 pw = time 0 = 84973 US)
  1 UNION ALL (cr = 3966 pr = 0 pw = time 0 = 84968 US)
  1 ANTI-HASH JOIN (cr = 3963 pr = 0 pw = time 0 = 84707 US)
  1 TABLE ACCESS BY INDEX ROWID CONNECTION (cr = 4 pr = 0 pw = time 0 = 123 en)
  1 INDEX SCAN SINGLE R94_SDE_ROWID_UK (cr = 3 pr = 0 pw = time 0 = 88)(object id 7404) US
  VW_NSO_2 VIEW 8586 (cr = 3959 pr = 0 pw = time 0 = 112274 en)
  8586 NESTED LOOPS (cr = 3959 pr = 0 pw = time 0 = 103686 US)
  3661 INDEX RANGE SCAN LINEAGES_PK (cr = 7 pr = 0 pw = time 0 = 67)(object id 307740) US
  8586 D94_PK1 INDEX RANGE SCAN (cr = 3952 pr = 0 pw = time = 0 70624 US)(object id 1637355)
  0 ANTI-HASH JOIN (cr = 3 pr = 0 pw = time 0 = 248-en)
  0 NESTED LOOPS (cr = 3 pr = 0 pw = time 0 = 71 US)
  0 TABLE ACCESS BY INDEX ROWID A94 (cr = 3 pr = 0 pw = time 0 = 68 fr)
  0 A94_ROWID_IX1 INDEX RANGE SCAN (cr = 3 pr = 0 pw = time 0 = 65 US)(object id 129281)
  0 INDEX UNIQUE SCAN LINEAGES_PK (cr = 0 pr = 0 pw = time 0 = 0 US)(object id 307740)
  0 REVIEWS VW_NSO_1 (cr = 0 pr = 0 pw = time 0 = 0 US)
  0 NESTED LOOPS (pr = 0 pw = time cr = 0 0 = 0 US)
  0 D94_PK1 INDEX RANGE SCAN (pr = 0 pw = time cr = 0 0 = 0 US)(object id 1637355)
  0 INDEX UNIQUE SCAN LINEAGES_PK (cr = 0 pr = 0 pw = time 0 = 0 US)(object id 307740)
  
  
  Elapsed time are waiting on the following events:
  Event waited on times max wait for the Total WHEREAS
  
  SQL * Net message to client 3911 0.00 0.00
  SQL * Net client message 3911 72,42 0.49
  latch: cache buffers chains 1434 0.07 0.00
  latch: shared pool 1 0.00 0.00
  DB file sequential read 28 0.31 0.14
  free latch 15 0.04 0.02
  latch: cache line items 1 0.00 0.00
  Journal of end of file switch 4 0.98 1.64

  ssddgreg wrote:
  Hi Julie,.

  Thank you for your excellent performance! I have the DBMS Oracle 10.2.0.3 Ent edition deployed on Sun Solaris (64-bit), FIRST_ROWS and CURSOR_SHARING = SIMILAR.

  I also checked the D94 table. SDE_DELETES_ROW_ID on the index, there are 3 indexes on the same column:

  D94_IX1, NON-UNIQUE
  D94_IX2, UNIQUE
  D94_PK1, UNIQUE

  This table is a system of another application of intermediate layer, and all the DXX tables are set up like that.

  Is it a seller third-party application that you have no control over the schema? Because your description of the indices look like a potential case of massive too indexing, increasing the workload required to keep all this index. Most likely some of these indices are redundant and could be covered by a less index number.

  Not to mention that my comment about the execution plan was probably not clear enough - I mean, it's the HASH_AJ trick prevents the optimizer to do clever things with predicates that I described.

  So basically, the question is: what execution plan that you get if you omit the HASH_AJ advice? And how much compliance requires this new plan at run time? You may need to add a NL_AJ key instead to get what I have just described, but it would be interesting to see, in the first place, what execution plan is generated without any evidence.

  A few other comments:

  First_rows optimizer mode: this application allows you to use the optimizer mode FIRST_ROWS requires? Because in principle, if you have an application that actually retrieves most of the time only the first rows of a result like set, then you should use (n) FIRST_ROWS optimizer mode instead. FIRST_ROWS optimizer mode is obsolete since Oracle 9i, if I remember correctly, and has strange side effects on implementation plans, especially if the SQL contains an ORDER BY clause.

  If your application usually treats all rows in a particular result set, default optimizer mode ALL_ROWS is more appropriate - using FIRST_ROWS as a band-aid because with ALL_ROWS things are slower only shows that there is something wrong that must be treated in a different way (by investigating why the ALL_ROWS mode can't seem to appropriate as the first activity execution plan).

  CURSOR_SHARING = SIMILAR: CURSOR_SHARING = SIMILAR Note has some other effects secondary (and bugs). Oracle recently announced on My Oracle Support (see document 1169017.1) CURSOR_SHARING = SIMILAR will be deprecated (no longer supported) in Oracle 12. See this note for a description why this setting can be problematic.

  Of course, if you have no control over a provider application and it works very well and has been optimized for these parameters (FIRST_ROWS CURSOR_SHARING = SIMILAR) then there not much you can do (or do) on this subject.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  Co-author of the book "OakTable Expert Oracle practices":
  http://www.Apress.com/Book/view/1430226684
  http://www.Amazon.com/Expert-Oracle-practices-database-administration/DP/1430226684

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• What JDE to use in the development of a new application

  In the development of a new application that will be deployed in the BB store, should the app with the last i.e.4.7 JDE or earlier? Assuming that no support for touch is necessary?

  Thank you

  Thank you.

  4.2 it is then.

  See you soon

• Helps with the rv180w and the Shrew soft vpn

  Hi, I'm trying to establish a vpn connection by using soft shrew for the cisco rv180w router.

  I watch and read everything I could find, but the connection drops during the opening of the tunnel.

  There were a few tuttorial here in the forum, but the links are down.

  I want Edifier is to establish communication and to be able to access my domain on the network.

  Any help with the settings would be greatly apeciated. I am new to vpn.

  Thanks in advance.

  Federico,

  Try to access the following link. It has good instructions for a similar model. The main difference is that the SA500 has double-WAN and the RV180W does not work.

  https://supportforums.Cisco.com/docs/doc-9378#comment-7216

  Here's another tutorial for the RVS4000 that can help:

  https://supportforums.Cisco.com/docs/doc-18443

  Check out the last post in the following thread, which received instructions for the RV220W (should be exactly the same as RV180W)

  https://supportforums.Cisco.com/message/4165652#4165652

  -Marty

• Can I use the session with the presentation variable variable

  Hello

  I'm using a method join the variable session or repository with the presentation variable.

  I created a variable called 'VarPres' in obiee presentation I created a session with a new block of initialization variable and I made this request

  "{Select fullName from employees where idEmp=@{VarPres}.

  but when I called the session variable in obiee I got this error

  The session variable, NQ_SESSION. S_OBJ, has no definition of value

  Hello

  Does not allow a presentation in an init block variable, simply because there is no variable presentation.

  In general what you try to do probably will never work because of "timing" and is as a session variable.

  A session variable is set once per session, for once he put no exchange of value as the init block is not executed again. So, because of this you already can imagine that there is a problem in your logic, if you want to use a value set by the user in the front end to set the value of a session variable.

• Need help with the API Explorer

  Hi all

  I am creating a workflow to automate certain tasks of P2V and I want to disconnect the NETWORK adapter prior to anyting on virtual machines. When everything is done, I want reconnect you this NIC I play with vCO for a few months now and I need to get help with the part of the script. I always managed to find a code but this time I did not find anything!

  So I need to script this part! I think I found a way to change the connection settings of the VMXNET3 NETWORK adapter with this part of the code:

  System.getModule("com.vmware.library.vc.vm.spec.config.device").getVirtualVmxnet3(backing,connectable,controllerKey,deviceInfo,key,unitNumber,addressType,macAddress,wakeOnLanEnabled)
  var connectset = new VcVirtualDeviceConnectInfo();
  connectset.connected = false;
  connectset.startConnected = false;
  

  Now, I need to find the way to set these parameters to a VM VMXNET3 adapter?

  How to off the virtual machine to these settings?

  Thanks for your help!

  If you are connected to a distributed switch, they canned for this com.vmware.library.vc.networking.connectVmNicNumberToVirtualDistributedPortgroup action.  If this isn't a vds connect you to, then you need to change then it will have to be slightly modified to use normal NIC instead of vds support.  You will also need to add these lines to the device configuration section:

  devicespec. Device.connectable = new VcVirtualDeviceConnectInfo();

  devicespec. Device.connectable.Connected = true;

  devicespec.device.connectable.startConnected = true;

  I copied this action and added these 3 lines to achieve what it looks like you are trying to do.  We don't really use standard switches in our environment.

  Paul

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827