Helps with the release of Dreamweaver site

Similar Questions

• Need help with the operation of Flash site after new servers of names

  

  Can not get the Gaia site is working on a new server " on: today at 15:10:35.

  Quote Modifier Enlever

  ---

  Hello.  Recently, I went from 1 & 1 shared hosting to a new webhost, holistic.

  My Flash (based on the Gaia framework) website does not work now.

  The use of the Flash Player debugger, I got the following error:

  hand: view.scaleX = 0.9041666666666667 and view.scaleY = 1.0129032258064516

  hand: view.x = 0 and view.y = 0

  Error: Cannot load the xmlsocket://127.0.0.1:5800 policy file

  Error: request for resource at the xmlsocket://127.0.0.1:5800 by the applicant of http://www.yourgods.com/bin/main.swf failed because the server isn't reachable.

  Security Sandbox Violation

  127.0.0.1:5800 interrupted connection - not allowed to http://www.yourgods.com/bin/main.swf

  Error: request for resource at the xmlsocket://127.0.0.1:5800 by the applicant of http://www.yourgods.com/bin/main.swf failed because the server isn't reachable.

  Even though I've set allowscriptaccess forever in my index.html received this note:

  Warning: AllowScriptAccess = "never" found in HTML.  This parameter is obsolete and ineffective.  See http://www.adobe.com/go/allowscriptaccess for more details.

  Warning: 'com' has no property 'onEnterFrame '.

  Regarding the violation of the Security Sandbox, my old Web host was of 1 & 1 and they are always the YourGods.com official registration office - but I now YourGods.com pointed at the DomainNameServers to my new host, holistic, who specializes in Drupal and has no experience with Flash - so I hope you'll bear with me and offer what advice you can because they said that I was basically on my own for any Flash troubleshooting problems.

  Who is likely to be the source of my problem (that I am 'pointing' only for name servers and only "stored" my domain name with the new host instead of transfer completely?

  And if so, I just need to create a strategy cross-domain like this xml file and leave it on my old Web host?

  <? XML version = "1.0"? >

  < cross-domain-policy >

  < allow-access-from domain = "MyNewDedicatedIPAddressHere" / >

  < / cross-domain-policy >

  I have never dealt with this kind of things cross-domain before any help would be appreciated.

  I don't have an exact answer...

  But if I'm not wrong, everything

  ": / / 127.0.0.1:5800.

  resources referrences on your local machine... NOT on your server.

  So I guess you have problems of multiple paths

  You should be able to test ALL of your pages using an http address provided by your new host BEFORE you go to DNS. If you do not understand this statement... contact your new host and ask them to explain.

  Best wishes

  Adninjastrator

• Please help with the release of iOS 3.0

  I wrote an app in October 2010 with Flash 5.0 on Mac.

  -Required system iOS 3.0

  I was publishing an update on the app with 5.5 Flash on Mac

  -iTunes Connect will not accept the upload because it isn't backward compatiable.

  -New API requires iOS 4.0

  How can I publish with Flash 5.5 and be compatiable with iOS 3.0?

  Or do I have to reinstall Flash 5.0 to release this update?

  Maybe the problem is that I have spend to retina display resolution.

  If I went and changed the high resolution, return to the standard, it would make a difference?

  Thank you! Thank you! Thank you!  For those who have the knowledge and the time to help!

  Jim

  Relocation of CS5 and making the IPA, there may be the fastest solution. Deactivation of the Retina display is not enough, because the publication of CS5.5 requires at least 4 iOS and at least an iPhone 3 g. Your existing application probably supports the original iPhone and 3G, so any application made with CS5.5 will not work on those.

• Help with the menu in dreamweaver

  Here's the menu that I built using pop menu magic:
  
  http://www.ivoog.com/link10
  
  I need each of the four tabs in the menu above to look like this:
  
  http://www.ivoog.com/Link2
  
  
  How can I make the background the same width and including this image? Please help me and try to do the same. Thank you and I appreciate your help.
  
  CSS: http://www.ivoog.com/link10/p7pm/p7pmh0.css
  
  JS: http://www.ivoog.com/link10/p7pm/p7popmenu.js
  
  
  
  Thank you and I will be wait for a response.

  Hello

  Here is an example using a repeated horizontally thin gradient as the
  background for the link "buttons."
  There are borders added to the link to make the edges of the buttons.
  Margins are applied to the links and a color background blue applied to the
  

• links for relaxation are in 'space the buttons '.

  An another, larger image gradient is applied again as a repeating background
  for

  tags in the UL p7PMnav, who styles background for the
  the drop-down menus.

  http://tnsgraphics.com/delete.htm

  You can change the layout by adjusting the padding and margins.
  You can add shadows to the buttons using images more extensible, containers
  and CSS.
  Just Google CSS shadows.

  Compare CSS and a few additions in the HTML code on this page to your
  to see the changes.
  Take care

  Tim

  "hahahaadobeman" wrote in message
  News:fp788l$8e6$1@forums. Macromedia.com...
  > See buy it, sell, my ivoog and help? All I want is the background image
  > be
  > identical
  >
  > http://www.ivoog.com/link2
  >
  > I think I know how to do the rest.
  > Would you please show me where and show and make that edit. Thank you.
  >

• Help with the release of PHP Mail function/Checkbox

  I'm about to shoot my library of books of David Powers, but I thought I'd post here in case I can't locate.
  
  I'm trying to manipulate the output of checkboxes in DW. I use PHP and when checkboxes are selected they come thrus issued (in an html e-mail) 'on '.
  
  So, if the 3 are checked is shows like "ononon". I rechecked the labelling, what am I missing?
  
  Thank you!!!

  Nevermind, found the info in the book of david - as usual... Thanks Dave!

• Help with the session variable PHP CS5.5 - Please

  Hi all

  I am needing a little help with the help of a session variable, and I hope someone can point me in the right direction.

  I created a PHP page that uses the Dreamweaver 'User authentication' feature and the basics of this works very well, to direct a user to the correct page depending on whether they are or are not a valid user. I want to customize the page 'user valid' with people, user name entered in the authentication of the user table... a seemingly simple task using a session variable, but I just seem not to be able to make it work!

  The generated code for the AU on page 1 is the following:

  <? PHP

  Validate request to connect to this site.

  If (! isset {})

  session_start();

  }

  $loginFormAction = $_SERVER ['PHP_SELF'];

  If (isset($_GET['accesscheck'])) {}

  $_SESSION ['PrevUrl'] = $_GET ['accesscheck"];

  }

  If (isset($_POST['txtfirst_name'])) {}

  $loginUsername = $_POST ['txtfirst_name'];

  $password = $_POST ['txtsurname'];

  $MM_fldUserAuthorization = "";

  $MM_redirectLoginSuccess = "member_update.php";

  $MM_redirectLoginFailed = 'login.php ';

  $MM_redirecttoReferrer = false;

  @mysql_select_db ($database_panto, $panto);

  $LoginRS__query = sprintf ("SELECT firstname, name OF web_access WHERE firstname = %s AND family name = %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysql_query ($LoginRS__query, $panto) or die (mysql_error ());

  $loginFoundUser = mysql_num_rows ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  If (via PHP_VERSION > = 5.1) {session_regenerate_id (true) ;} else {session_regenerate_id() ;}

  Declare two session variables and assign them

  $_SESSION ['MM_Username'] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  If (isset($_SESSION['PrevUrl']) & & false) {}

  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];

  }

  Header ("Location:".) $MM_redirectLoginSuccess);

  }

  else {}

  Header ("Location:".) $MM_redirectLoginFailed);

  }

  }

  ? >

  First of all, the text highlighted in red above seems to be setting the session variable that I need. Is this correct?

  If so, what is the code that I need to put on page 2 to use this session variable? or

  I have to do something else on the page 1 to correctly assign the session variable?

  Would be very grateful for your expertise

  Mark

  It seems that you put the columns incorrectly in the user authentication server behavior. This is the SQL query that checks the credentials of the user:

  $LoginRS__query = sprintf ("SELECT firstname, name OF web_access WHERE firstname = %s AND family name = %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  You are looking for first name and last name, while you should look for the user name and password of the user.

  $_SESSION ['MM_Username"] is a session variable that stores the login name of the user. To use it in a page, all that is needed is the page start with session_start(). You can then echo the value to display.

  If you want to display the person's true name, you must create a recordset in the second page, use of $_SESSION ['MM_Username'] to search for the first name and the patronymic. Alternatively, you can change the code like this (I copied only part of it):

  $LoginRS__query = sprintf ("SELECT firstname, surname OF web_access WHERE firstname = %s AND password is %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysql_query ($LoginRS__query, $panto) or die (mysql_error ());

  $loginFoundUser = mysql_num_rows ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  $row = mysql_fetch_assoc ($LoginRS);

  $_SESSION ['full_name'] = $row ["FirstName"]. ' ' . $row ['name'];

  If (via PHP_VERSION > = 5.1) {session_regenerate_id (true) ;} else {session_regenerate_id() ;}

  Declare two session variables and assign them

  $_SESSION ['MM_Username"] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  You can then use $_SESSION ['full_name'] in a page which begins with session_start().

• Help with the part number - paw index screen X230ti

  Can anyone help with the reference number and or the availability of the small 'legs' that sit in the slots on each side of the keyboard on a X230ti? They locate into the slots with the screen and prevent movement when the lid is closed.

  I have the same and among the small beasts broke and the screen tends to rotate when closed.

  Have searched for a parts list but cannot find the "paw" in any list that I found. Thank you

  Here is a picture of the X230t keyboard (and palmrest) framework. You can see the small 'legs' to belong to him.

  I hope someone from Lenovo will tell you how to order this part. EDIT: part number 04W6808.

  

• I don't want Microsoft Windows 10, but I don't want to stop with the banners on my site.

  * Original title: Windows 10 banner

  I use Windows 7. I like it. I get these invasive banners for 10 of Microsoft which I just can't close.  It covers my banner "search for", so I can't find anything.

  Repeat - I want 10 of Microsoft, but I don't want to stop with the banners on my site. How to stop?

  See if it works. If this isn't the case, send a screenshot of these banners. I have not heard such a thing.

  With the help of GWX Controp Panel to permanently remove the icon of Windows 10 Get
  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• help with the alignment of the e-mail

  Hi guys, looking for help with the alignment of an email Center.

  Sound centre lining up properly in the preview of dreamweaver and preview of mail chimp, but when I sent it to Gmail, it has left-aligned.

  Any ideas why this is?

  Keep in mind im a recruit in coding and Dreamweaver.

  I hope that the code below allows...

  Thank you!

  

  I don't know about you but display: inline-table; is not necessary.

• need help with the mac version of PES

  need help with the mac version of PES

  If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  p.s. If you need a more direct link, you must specify the exact version you want.

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.