8610: print head seems to be missing

Similar Questions

• HP officejet 6600: print head seems to be missing, not detected, or incorrectly installed

  does not print hp officejet 6699 - gives message "print head seems to be missing, not detected or installed incorrectly."

  I unplugged the instructions and it does not work.

  I replaced all the cartridges, and it does not work.

  It is more than one year warranty and I do not know where to take.

  I didn't have to buy a new one immediately.  The life expectancy of an all-in-one now is about 2 years old?   Can someone tell me what to try?  Thank you!

  He looking as if the printhead has moved or is not seated correctly in the printer? Try to gently move it and it sits evenly.

  There is an update to the firmware of your device which can help. You can find it here.

  Thank you very much

  Michaele

• Office Jet 8610: Print the faxes that I missed

  How to print the actual faxes that I've not received when I was out of ink printer? I have a list of fax numbers - tried - to send faxes for me, but what I can see is the fax number, that they sent, the date and time they sent and the total number of pages. Any ideas? Thank you! StarSema

  Welcome to the HP community @StarSema,

  I read your post on how you're looking to print the faxes in memory of your Officejet 8610, and I hope I can help you. From my memory, you should be able to access the Fax Menu in the configuration Menu of the printer and look for the history of Fax and reprint the faxes in memory.

  If this does not work, or if you have any questions, let me know and I'll do my best to help.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope I helped!

• HP8600 and 8610: print head for 8600

  Are the printheads for the 8600 and the interchangeable 8610?

  Hello

  The answer is NO, they are not interchangeable.

• Officejet Pro 8600 print head error message

  I get an error message "print head seems to be missing, not detected, or incorrectly installed. Printhead missing or failed. "I followed the solutions provided on the printer as printer be disconnected and reconnected. out of the cartridges as demo showed. Everything was going well. Reconnected to the router wireless system. All to nothing does not. I bought this printer in February of this year and had no problems until this has happened in the last few weeks. It is still under warranty. I need this fixed or replaced immediately. What should I do? Thank you for your help.

  Hello

  Please click HERE to access the procedure which should solve the problem.

• HP Officejet Pro 8600 Plus e-All-in-One Printer - model N911g - Nr CM750A print head

  I have the print head seems to be missing, not detected, or improperly installed, a message. Despite all recommendations of HP reselve by train this problem nothing works. What should I do next?

  In general, this error when an electrical connection between the printead and the printer problem.  Have you tried to remove and wipe the electrical contacts of the printhead (at the back) own?

  Thus, there is a document with the steps to resolve this error message.  The document can be accessed here.

  If you follow all the steps and get to the ' four Solution: replace the print head, "then the next step will be to call the HP Technical Support about this problem.

  If you are still in warranty, HP can replace the printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• HP Photosmart C6380: print head problem

  I just replaced the ink cartridges in my printer and a message pops up saying (printhead problem remove all the cartridges, then lift gray latch and printhead, and then reinstall the cartridges and print head) I did it a dozen times now, and the message is still there, what should I please

  Hi @PC21,

  Welcome to the Forums of HP Support!

  I understand that you are at the reception and the error about the print head on your printer HP Photosmart C6380. I will definitely do my best to help you.

  I would like to try the steps in this guide, the 'Print head problem' or "print head seems to be missing or corrupt" message for HP Photosmart C6300 all-in-One Printer Series.

  In addition, you can try the solution in this video. Use at your own discretion.

  Videos: 564 HP & HP 920 ink printers of the series - printhead to hot water Flush.

• HP Officejet 6700 Premium - printhead seems to be missing

  Seems to be a common problem with these printers - me too I got the error message "the print head seems to be missing, not detected or badly installed"-I tried all the suggestions of troubleshooting with no results.

  I have never had any problems with HP in the past, and since 1999 have bought only products HP - when things had to be repaired under warranty, that these were always made in a very quick way - HOWEVER...

  This time is a totally different story - please someone at - he found a solution yet or is that a case of replacing the printer - can someone help!

  Welcome to the @debz143 forums, I hope you're well

  I read your post about the error "Missing or has no print head", you receive on your Officejet 6700. If you have tried all the troubleshooting, including a power reset (see below), give us a call directly to see what your replacement of the printer or trade options are with HP.

  A "Missing or doesn't have a printhead" Error Message is displayed on the printer or on the computer

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday!

• HP Photosmart C309A: black ink does not print - print head prints correctly to a different printer

  Black does not print. (All HP inks) Replaced the black head - has still not printing.  Tested in an another HPprinter - head works very well.

  Please answer - is there a software, cabling, physical issue with the black only?  (Tried to restart the printer and cleaning already)

  Hi @KenKrieger,

  I understand that you are having problems with the black does not print, you have replaced the printhead to another printer and it prints fine. I want to help you.

  I'm assuming that you used the same cartridges in the print head when you try them in another printer, let me know if you didn't like it.

  Given that the new printhead works in another unit, it seems that it would be a problem with the hardware with the printer and it would need to be repaired.

  I have provided all the documentation for this problem, probably all of the steps have been made previously.

  Documentation to solve the black does not print:

  Printer prints a blank Page or does not print black or color ink for the HP Photosmart Premium C309a...

  This document provides instructions to manually clean the contacts of the cartridge.

  ' Ink cartridge problem - following ink cartridges seems to be missing or corrupt "Message say...

  Here is a document to manually clean the print head.

  'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer...

  For more assistance, please contact HP support . Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• HP Officejet 6600 print head error message

  Recently had an electrical storm and power neighbor hood was off briefly. Though even my printer is plugged into a surge protecter, I now have an error message on my printer that reads...

  "Missing or faulty print head".

  ceyan, magenta, yellow, black

  the print head seems to be mjssing, not detected, incorrectly installed, or incompatible"

  Before the storm, I had installed 2 new ink cartridges. My troubleshooting efforts consisted of unplug the printer from the power source and plug back and removing ink cartridges / resettlement. I always get the error message "printhead".

  Hello

  I think you did everything I would have tried.

  Even if unplug you the printer, I wonder did you leave it unplugged for more than 15 seconds.  See the link

  http://support.HP.com/us-en/document/c03750651

  If this does not resolve the problem then I think it would be appropriate contact HP because this printer is probably still under warranty.

  Hope this helps somehow.

• print head problem Officejet 8500 has

  Hello

  I just replaced all my ink cartridges, and still it tells me that there is a printhead problem; the message says to replace the printhead to resume printing.

  Didn't I do it when I changed the ink cartridges?  Visual instructions on the printer seems to show a slightly different model of what I, and the print head seems to be separate.  It does not have to be the case in my model.  Anyway, the instructions also say press the button 'change print head' in the main menu, I can not even to the main menu but it is stuck on the message "print head problem".

  I'd appreciate some advice on how to proceed!

  Thanks in advance!

  

  This picture help?

• HP Officejet Pro 6835: Print head: missing, defective or Incompatible for 6830

  My 8830 printer is only 6 months old and today I just received this message "print head: missing, defective or Incompatible. Tried to reset and same question as other messages. It seems that he is a typical problem with this printer. Someone can help or will it take to complain about Costco for the sale of this product?

  Hello
  
  Thank you for using the HP forum.
  
  If you receive this error, is there nothing more you need to do, except to contact support.
  
  Depending on where you are in, please select the appropriate link:
  
  Series 6800 printer supports training US, Asia
  http://support.HP.com/us-en/document/c04839288
  
  Series 6800 printer supports statement Europe Middle East Africa
  http://support.HP.com/us-en/document/c04839289
  
  Thank you.

• OfficeJet Pro X476W - missing 0xc6fd0013 message, or incorrectly installed print head not detected,

  Hi, everything has been good with this printer up to a couple of days. Whist, the right kind of noises - it just stopped printing, or sometimes {in response to requests for print) spat a blank page or both.

  I tried to clean the print head, but he travels just a loop and does nothing, if the wall point, deleted and reinserted cartridge, removed market turned and replaced the duplex roller, blah blah - all the usual stuff.

  But... I've never seen such a script error before - this is worrying. The printer just died on me?

  If so, is it possible to replace the printhead on one of them?

  No indication of how to solve the problem please?

  Thanks in advance...

  I couldn't find a service manual for the OJ Pro x476w or the other.  It is usually the case for OfficeJet products but I was under the assumption that HP was poised to release a service manual for the X Pro series since his business are more than the normal OJ.

  I also don't seem to be able to view the guide to normal use of the HPs site right now.  My hope was to search through it for clues as to how to complete the resettlement of the print heads, as there is usually a section small maintnenance included in the documentation.

  Given the nature of this problem and what I heard of HP engineers that the printhead from the printer table must have a life that survives to the printer.  It is supposed to be enough printheads on eachother table backup in the case of breakdowns that users are not supposed to notice the difference.  Even through the printer is out of warranty HP may be interested in helping you with the picture of the print head.  I give them a call and see if they can offer any assistance.

  Another idea would be to find a seller of parts and ask them if they have an array of replacement for your printer print head.  If they could have some instructions on how to install that you could use to reinstall your current table.  Googling autour, I was not able find parts online so this is perhaps a good reason to call HP and ask for suggestions on where to find spare parts.

• Missing print head

  I have a hp photosmart 5510 and Hp sent me a replacement due to a different problem.  When I plugged it in for the first time I get an error message saying print head is missing. I tried troubleshooting on their website and nothing has helped.

  Does anyone have this problem before?

  I'd take a glance at this document .  If the steps in the document below doesn't solve your problem then contact Hp.   I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call. Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• OfficeJet Pro 6230: Print head: missing, defective or Incompatible

  

  I have a 3 month old printer Officejet 6230 Pro who now will not be printed.  I get this message: "print head: missing, defective or Incompatible.

  I tried:

  (1) the printer reset

  (2) I have genuine HP cartridges

  (3) removed, cleaned and replaced cartridges

  (4) Firmware update

  I cannot perform a "print head cleaning" or something like that.  I get the message "printer is busy. Try again later. »

  What else can I try?  How can I get this printer working again?

  This problem has been resolved.  Chat with support.  They ship me a replacement printer