Hi all! Acer Aspire ZC - 602

Similar Questions

• I need to replace the hard drive of my Acer Aspire all-in-one 5600U?

  I have an Acer Aspire all-in-one 5600U. The other day the power in our House went out due to a storm. After she came back and went to use my computer, the screen was black and said "Reboot and select proper... boot device." ». I tried to download the tool of creation of media to a USB port and start the system using this. I can get into the menu troubleshooting but nothing works. When I try to make a custom Windows installation, it says "no signed device drivers were found". What is a hard drive problem? In the BIOS, under Boot Options is does not list a specific hard drive. It just says: 'hard drive '. Thanks in advance for any help or suggestion.

  Thanks, that's what I needed to know. Appreciate the help, IronFly.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Lost all the acer software has integrated when I bought the acer aspire v3 - 571

  I use my acer aspire and I just upgraded my OS Windows 10. Since a few days it went well, but suddenly window 10 crashed and I had to reinstall it. Now after you have reinstalled windows 10 my many features such as backup media Acer manager, clear.fi, clear.fi photo etc all are gone. When I installed Windows 10 for the first time all of them were there. Only after reinstalling I lost. Now how to recover? Any help?

  Most of the Acer utilities can be installed to the Master Installer (downloadable from your machine type page drivers & manuals) or Acer care center.

  Acer BYOC applications (clear.fi, abPhotos, abDocs, etc.) are available at Acer BYOC Apps.

• Acer Aspire 5742 G died. I think the BIOS is damaged because all I get is a blank screen.

  I was a heavy task on my other laptop and I wanted more RAM, so I decided out of the 4gigs of my Aspire 5742 G only to find out that this is not not a 4 × 1 GB of RAM (instead a 2x2gb DDR3). All I've done is out of RAM, I saw that it was only 2gigs and put in (nothing else, I know my way around computers quite). Then I thought to share work on the network, only to find out that my Aspire 5742 G will not start. Nothing. Not eveb the Acer logo appears. Access to the hard drive led is always off (not a single blink). Terrified. I thought it would be to display, but like I said the HARD drive light flashes once again.

  So I jumped to Google. Discovered it probably a BIOS problem. So I downloaded the BIOS Acer will, comes to be welcomed with a ZIP file of gibberish. I have no idead how to use this ZIP to update my BIOS. The exe file is not good as the PC starts no and all other methods seem unlikely given the boot selection is not yet possible.

  Can someone please guide me to the right maybe average to refresh my BIOS?

  Thanks in advance,

  PC Info and specifications:

  Acer Aspire 5742 Series
  Model No.: PEW71
  Aspire 5742 G-374G50Mnkk
  MFG Date: 1011
  Current OS: Windows 8 Pro
  Original OS: Windows 7 Home Premium
  RAM: 4 GB (2x2gb) DDR3
  CPU: Intel Core i3 - 370 M
  GPU: ATI Mobility Radeon HD 5470
  HARD DRIVE: 500 GB 2.5 "SATA

  [private under the leadership of life]

  It may be almost impossible to diagnose a problem remotely, I hazard a guess and suggest that your problem has nothing to do with your BIOS.

  Given your description of your actions, I would recommend you check and double-check your RAM seats. Also, make sure there is no damage to the socket. There is also the probability that static was able to destroy the RAM. You may need to try known good RAM to exclude this possibility.

  It is not always possible to update a BIOS if there is a hardware problem.

  Of course, I can't risk a BIOS Setup until there is absolutely no doubt that a problem does not exist elsewhere. If an update attempt fails, you might find yourself worse. In short, make sure that your RAM and the seating is 100% before looking elsewhere. Your choice of courses.

• Run Wdws7 pro on two new Dell XPS. I back up all my data on my ACER Aspire server.

  I back up all my data on my ACER Aspire server. The new Dells with Wdws 7 pro will not find the server. He will find the server to backup everything, but when it came time to recover the material it will not find the server. I also have a backup server with 11 Wdws, there will be the Acer server, so there must be something with the Dell printer, or a combination of software and laptop computer.
  I have this problem since the purchase of new laptops. My old XPS, never had any problem using Wdws XP. This problem is unique, for either, no one wants to venture a solution, or Dell or Microsoft have a small problem, nobody has met him.

  Hello

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64.

  PROBLEM WITH MY LAPTOP CONFIG AND SYSTEM.

  I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64. It has been preloaded. I am VERY confused!

  When you view this file.

  If you check through the Task Manager > processes (tab) some will note * 32 because they are native 32-bit applications running on a 64-bit operating system.

• A number of keys on Acer Aspire have suddenly stopped working.

  Original title: some keys not working not

  I have an acer aspire laptop all at once a number of keys have stopped working the x c. f n?  stopped working.  any ideas?

  Hi Laura,

  1. have you made a recent software or hardware changes to the system?

  2. what Windows operating system do you use?

  Method 1:

  You can try to install the latest version of the drivers from the Acer site and check.

  Support of Acer & downloads

  Method 2:

  You can also check if the FN key is enabled. If so, then try to switch it off.

  Method 3:

  If you still experience the problem, try to activate the on screen keyboard and check if the problem persists.
  Type without using the keyboard (on-screen keyboard)

• WINDOWS 7 STARTER/ACER ASPIRE ONE UPDATE HELP

  I have a brand new Acer Aspire One Netbook.  It is brand new, so after I did the initial installation for the new netbook, Windows 7 is an update.  When the update is complete, it blocks my netbook.  I get a black screen and a cursor only.  The only way I can fix it is to restore back to the factory and start all over again.  Anyone know why this is happening or that updates 62 is the cause? I basically can't update my OS until it is fixed or know where it is and it can check the updated list.

  You say you have 62 updates. The only true way to know what update is the cause of the problem is by installing one at a time.

  I was looking especially the optional updates as shows drivers etc. If you are offered drivers, you should consult the manufacturer's website to see if indeed you really need the updated drivers.

  TaurArian [MVP] 2005-2011 - Update Services

• New portable printer HP2540/301 Acer Aspire 1 has no disk drive and a silly user. Help, please...

  I bought myself a nice 5240 again 301 printer all-in-on Wednesday.

  Since then, I have made that fight with him since then.

  My laptop is an Acer Aspire one, one of the smallest, which unfortunately doesn't have a hard drive in it. My first thought went to download drivers. The web page did not work and I realized then, that, without the user manual (which I think is on the disc), I'm totally lost.

  If someone could please help me.

  I made an impression that says.

  Check your network printer name HP (SSID) corresponds exactly to your router (SSID) wireless network name.

  If they do not exactly match, run set up the printer software to set up your HP printer wireless.

  I guess that's the software on the drive. Is it possible to download the software online?

  Any help would be accepted with gratitude that I have no idea what I'm doing atm. I just starting to learn how to properly use Windows 8 atm, so far my computer all skills hass been how to open a browser and an office.

  Thank you.

  I would add also, I downloaded the application too, but which does not recognize that there is a printer at all.

  Hi, here is the link for the driver.

  Link to the user guide.

• Built in mic on acer aspire one does not

  The microphone on my acer aspire one netbook does not work. I am running windows XP on the netbook and had this problem once before some time back, but can't remember what the person tech told me to uninstall that does the job all of a sudden again. I use also the audio if it helps Realtek HD. I tried several times to update the drivers and reinstall the software from the acer site, it does not work... any suggestions?

  Hello

  Thank you for your message.

  I see that you are facing problems with the built-in microphone.

  Let's not worry! I'm here to help.

  Quick questions:

  1. what exactly happens when you use the built-in microphone? You receive an error message?

  2. What is the status of the device in Device Manager?

  Check out this link to learn more about device manager:

  By using Device Manager

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true

  Let's try the following and check:

  Method 1:

  We will adjust the volume of your microphone and check if it is set as default.

  (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

  (b) click on sounds, click on the recording tab.

  (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

  (d) in the Properties of the Microphone dialog box, click the custom tab.

  (e) select or clear the check box Amp Microphone .

  (f) click the levels tab.

  (g) set the slider for the volume to the desired level, and then click OK.

  (h) click on OK to close the sound dialog box.

  Method 2:

  I would also say that you update the drivers for your Microphone and looking for the issue.

  See this link for more information:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• Acer Aspire Easystore HDD Fail - replace/upgrade HARD drive

  
  

  I have an Acer Aspire Easystore and recently suffered a hard drive failure and will have no chance of finding a list of compatibility hdd of any kind.

  Currently drives 1 TB and since 1 has no, I copied all the data on a single 3 TB drive, so I'm ready to replace all the drives with drives of 2 TB or 3 TB and start a new raid 6 (5 + 1, I think).

  Can you help me?

  P/N: ARE. TR100.270IE

  All that I see, said the SNID must be 11 or 12 digits, but mine is only 8

  It's *.

  Help, please

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to names, email addresses, telephone numbers, serial numbers, etc..]

  
  

• Questions about the Acer Aspire Switch 10 guarantee

  Hello

  I am very interested and very probably going to go ahead with a purchase of the Acer Aspire Switch 10 but I have a few questions. As the device is not currently available in Australia my plan is either:

  (A) choose one of these devices to the top when I visited the United States in two weeks

  Or

  (B) order now (of the United States) and delivered it here, so it comes at the time wherever I'm back from my trip.

  So my main question is, as I have seen many different people having the same problem here with no apparent difficulty, if I made the purchase would I covered by warranty? I think that one would see me covered by the guarantee of international travelers, but it is not very clear. The second option would be local warranty (United States), is that correct? So if I had a problem I have to send it to the United States (at my expense)? Or should it be mentioned here in Australia? And finally, if a problem arises here, local service center (located in Sydney) acer would be able to solve the problem or find a replacement model, even if I have to pay a fee?

  Thanks for the help, I am completely impressed with the device for what it is, I don't want to be stuck with a dud and know I am not covered by the warranty after I come back home (Australia) or when it arrives.

  A traveler warranty Acer is designed so that if you buy a product, then travel outside your country up to 90 days, you can get service while you travel. Because you live in Australia and be buying abroad and return home, that you would classify not as a traveller in good faith. You can read all of the terms and conditions in http://www.acer.com/worldwide/support/itw.htm.

  The warranty for a product purchased in the United States would need to be repaired in the United States. Unfortunately, you would be responsible for the shipping of the product to the United States for repair, and we can only ship to an address in the United States, so you have to send it to someone in the States who may transmit the packet.

  Regarding if the deposit of Australian repair can repair the product, it would be up to their discression regarding if an ITW applies and if they are able to get the parts of the system. It is recommended that any warranty service needed on a purchased product, to be in the country of the initial sale.

• Problems with Acer Aspire V5 - 573 G UEFI?

  Hello

  I have Acer Aspire V5 - 573G. Before all the problems start I used Legacy BIOS mode with 10 Windows Pro 64 bit OS. Have the latest BIOS v2.30.

  So, recently, I decide to move from the Legacy BIOS UEFI and reinstalled Windows 10 Pro 64-bit with UEFI mode activated with the GPT partition style. Everything went well with the installation.

  Now I am facing following issues with UEFI and Windows 10 witch, which I didn't in Legacy BIOS mode:

  1. When the laptop goes to sleep and is not touched for a while, I can't wake up to laptop. Press any key on the keyboard or touch the touchpad don't wake it either. Only way is to press the Power button to stop completely and then turn it back on. I don't know if it's something to do with the Windows settings to resolve this problem.
  2. Restart Windows sometimes stop laptop computer. It's really strange... Windows shows it restarts, screen goes black and does not start, instead it laptop shutdown. ??
  3. And when I shut down the system, it is not entirely clear. Often the blue light continues to blink, CPU and GPU fans are always and still closing system entirely to press on the button / stop.

  These issues are somehow related to UEFI, because I had no such problems with the traditional mode and Windows 10. This is starting to annoy me when the laptop stops completely.

  Any help on this?

  Thank you!

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-S7-stuck-in-sleep-mode/m-p/427855#M3432

  http://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p/...

• Acer Aspire saying no driver found, third time this happened

  I just bought this Acer Aspire PC desktop about a month ago. Every week, it seems to starts me in offline mode and when I try to reconnect, it says "driver not found please reinstall the driver" when I go to look and check the driver it says drivers work fine. It will not always connect to the internet.  When I try to open Device Manager that it does give me an option to fix as I have before clicking options checking to see if my settings were changed (as they have changed by themselves before) it is frustrating that I use my computer for work and this happened now, at least every week but this time I am unable to fix it. All solutions? It's my first Acer and I think it's a terrible computer at this stage. The last 2 times I had to wipe the PC clean and start over, losing all my important documents and photos. Very unhappy.

  I change the cable with a new one, then download this driver:

  http://global-download.Acer.com/GDFiles/driver/LAN/Lan_Realtek_8.29.314.2014_W81x64_A.zip?acerid=635...

  and install it.

  Check if your ethernet card always disconnect.