VPN on 2800 router does not

Similar Questions

• I am trying to create a VPN connection, but it does not work

  I am trying to create a VPN connection, but it does not work
  The wizard cannot establish a connection. And if I try to record simply does not connect
  It does not work. If I try to click on find the problem, there simply
  do nothing.
  I tried it on another pc, where it worked. So the problem is not the
  router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.

  It does not create even a the connection icon
  Thank you

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Router does not not after installing updates

  I installed the updates on my computer and the next morning my wireless does not work!   I can go on the internet when I plugged my ethernet cable.  Whenever I try to go on the internet without being plugger to the ethernet cable that wireless network connection not connected, he said.  Already contacted AT & T to know is that they were having DSL problems in the region, but they said no.  Apparently my router does not work after I made my Microsoft Updates.

  Hi Racer29,

  -Who were the updates (KB) that you have installed?

  Does restoring the system to a point when it wireless was working and install the updates one by one. Restart the computer after installing each update and check the update at the origin of the problem.

  See How to restore Windows XP to a previous state

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Brand new Dell 2808 router does not work.

  1. the 2808 is not connected to the internet.

  2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

  3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

  4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

  5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

  6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

  7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

  8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

  Any ideas?

  Thanks in advance to 1 million.

  Keith

  The simplest method to contact support is to enter the serial number on our support site.
  http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

  The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

  Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

• My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

  My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

  Belkin support for your model, for installation instructions.

  Your router will not appear in the devices

• So, updated for Win 7. Clean install. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

  Clean install. 2 problems. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

  Probably you run first win7 Upgrade Advisor, who did you would probably show your system as not supported under win7

• RV042G VPN Client to gateway does not

  I try to set up VPN on my new RV042G, but may not have to work.

  I try to use the gateway client and want to connect my laptop to the router with a vpn as screwsoft or greenbow client.

  How I set up, it does not connect. After doing some scans of port, I discovered that it opens all ports. After having turned off the firewall, that he still does not seem a suitable open. (I expect 500 for ipsec).

  can someone help me out here? PPTP seems only open ports when activated, but I don't want to use it.

  Hi Ronald,.

  Found it please the attachment file how to configure ShrewVPN with RV0xx, just to be sure that the configuration is of course RV042 and shrewVPN

  Please rate this post or marked as replied to help other customers of Cisco

  Greetings

  Mehdi

• ASA 5505. VPN Site-to-Site does not connect!

  Hello!
  Already more than a week there, as we had a new channel of communication of MGTSa (Ontario terminal Sercomm RV6688BCM, who barely made in the 'bridge' - had to do the provider in order to receive our white Cisco Ip address), and now I train as well more that one week to raise between our IKEv1 IPsec Site-to-Site VPN tunnel closes offices.
  Configurable and use the wizard in ASDM and handles in the CLI, the result of a year, the connection does not rise.
  Cisco version 9.2 (2), the image of the Cisco asa922 - k8.bin, Security Plus license version, version 7.2 AMPS (2).
  What I'll never know...
  Debugging and complete configuration enclose below.
  Help, which can follow any responses, please! I was completely exhausted!

  Config:

  Output of the command: "sh run".

  : Saved
  :
  : Serial: XXXXXXXXXXXX
  : Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
  :
  ASA Version 9.2 (2)
  !
  hostname door-71
  activate the encrypted password of F6OJ0GOws7WHxeql
  names of
  IP local pool vpnpool 10.1.72.100 - 10.1.72.120 mask 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 10.1.72.254 255.255.255.0
  !
  interface Vlan2
  nameif outside_mgts
  security-level 0
  62.112.100.R1 255.255.255.252 IP address
  !
  passive FTP mode
  clock timezone 3 MSK/MSD
  clock to DST MSK/MDD recurring last Sun Mar 02:00 last Sun Oct 03:00
  DNS lookup field inside
  DNS server-group MGTS
  Server name 195.34.31.50
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  network of the NET72 object
  10.1.72.0 subnet 255.255.255.0
  network object obj - 0.0.0.0
  host 0.0.0.0
  network of the Nafanya object
  Home 10.1.72.5
  network object obj - 10.1.72.0
  10.1.72.0 subnet 255.255.255.0
  network of the NET61 object
  10.1.61.0 subnet 255.255.255.0
  network of the NETWORK_OBJ_10.1.72.96_27 object
  subnet 10.1.72.96 255.255.255.224
  network of the NETT72 object
  10.1.72.0 subnet 255.255.255.0
  network of the NET30 object
  10.1.30.0 subnet 255.255.255.0
  network of the NETWORK_OBJ_10.1.72.0_24 object
  10.1.72.0 subnet 255.255.255.0
  object-group service OG INET
  the purpose of the echo icmp message service
  response to echo icmp service object
  service-object icmp traceroute
  service-object unreachable icmp
  service-purpose tcp - udp destination eq echo
  the DM_INLINE_NETWORK_1 object-group network
  network-object NET30
  network-object, object NET72
  DM_INLINE_TCP_1 tcp service object-group
  port-object eq www
  EQ object of the https port
  inside_access_in extended access list permit ip object NET72 object-group DM_INLINE_NETWORK_1
  access extensive list ip 10.1.72.0 inside_access_in allow 255.255.255.0 any
  inside_access_in extended access list permit ip object Nafanya any idle state
  inside_access_in list extended access allowed object-group OG INET an entire
  inside_access_in of access allowed any ip an extended list
  inside_access_in list extended access deny ip any alerts on any newspaper
  outside_mgts_access_in list extended access allowed object-group OG INET an entire
  outside_mgts_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
  outside_mgts_access_in list extended access deny ip any alerts on any newspaper
  access extensive list ip 10.1.72.0 outside_mgts_cryptomap allow 255.255.255.0 object NET61
  VPN-ST_splitTunnelAcl permit 10.1.72.0 access list standard 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  outside_mgts MTU 1500
  IP check path reverse interface outside_mgts
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside outside_mgts) static source NET72 NET72 NETWORK_OBJ_10.1.72.96_27 NETWORK_OBJ_10.1.72.96_27 non-proxy-arp-search of route static destination
  NAT (inside outside_mgts) static source NETWORK_OBJ_10.1.72.0_24 NETWORK_OBJ_10.1.72.0_24 NET61 NET61 non-proxy-arp-search of route static destination
  !
  network obj_any object
  NAT (inside outside_mgts) dynamic obj - 0.0.0.0
  network of the NET72 object
  NAT (inside outside_mgts) interface dynamic dns
  inside_access_in access to the interface inside group
  Access-group outside_mgts_access_in in the outside_mgts interface
  Route 0.0.0.0 outside_mgts 0.0.0.0 62.112.100.R 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  without activating the user identity
  identity of the user by default-domain LOCAL
  AAA authentication http LOCAL console
  the ssh LOCAL console AAA authentication
  Enable http server
  http 10.1.72.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  card crypto outside_mgts_map 1 match address outside_mgts_cryptomap
  card crypto outside_mgts_map 1 set pfs Group1
  peer set card crypto outside_mgts_map 1 91.188.180.42
  card crypto outside_mgts_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_mgts_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  card crypto outside_mgts_map interface outside_mgts
  inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  inside crypto map inside_map interface
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  E-mail [email protected] / * /
  name of the object CN = door-71
  Serial number
  IP address 62.112.100.42
  Proxy-loc-transmitter
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint1
  registration auto
  ASDM_TrustPoint1 key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_TrustPoint0 certificates
  certificate eff26954
  30820395 3082027d a0030201 020204ef f2695430 0d06092a 864886f7 0d 010105
  019
  6460ae26 ec5f301d 0603551d 0e041604 14c9a3f2 d70e6789 38fa4b01 465d 1964
  60ae26ec 5f300d06 092 has 8648 01050500 03820101 00448753 7baa5c77 86f70d01
  62857b 65 d05dc91e 3edfabc6 7b3771af bbedee14 673ec67d 3d0c2de4 b7a7ac05
  5f203a8c 98ab52cf 076401e5 1a2c6cb9 3f7afcba 52c617a5 644ece10 d6e1fd7d
  28b57d8c aaf49023 2037527e 9fcfa218 9883191f 60b221bf a561f2be d6882091
  0222b7a3 3880d6ac 49328d1f 2e085b15 6d1c1141 5f850e5c b6cb3e67 0e373591
  94a 82781 44493217 and 38097952 d 003 5552 5c445f1f 92f04039 a23fba20 b9d51b13
  f511f311 d1feb2bb 6d056a15 7e63cc1b 1f134677 8124c 024 3af56b97 51af8253
  486844bc b1954abe 8acd7108 5e4212df db835d76 98ffdb2b 8c8ab915 193b 8167
  0db3dd54 c8346b96 c4f4eff7 1e7cd576 a8b1f86e 3b868a6e 89
  quit smoking
  string encryption ca ASDM_TrustPoint1 certificates
  certificate a39a2b54
  3082025f 30820377 a0030201 020204 has 3 9a2b5430 0d06092a 864886f7 0d 010105
  0500304 06035504 03130767 36313137 30120603 55040513 6174652d 3110300e b
     
  c084dcd9 d250e194 abcb3eb8 1da93bd0 fb0dba1a b1c35b43 d547a841 5d4ee1a4
  14bdb207 7dd790a4 0cd 70471 5f3a896a 07bd56dc ea01b3dd 254cde88 e1490e97
  f3e54c05 551adde0 66aa3782 c85880c2 b162ec29 4e49346a df71062d 6d6d8f49
  62b9de93 ba07b4f7 a50e77e1 8f54b32b 6627cb27 e982b36f a 362973, 0 88de3272
  9bd6d4d2 8ca1e11f 214f20a9 78bdea95 78fdc45c d6d45674 6acb9bcb d0bd930e
  638eedfe cd559ab1 e1205c48 3ee9616f e631db55 e82b623c 434ffdc1 11020301
  0001 has 363 3061300f 0603551d 130101ff 0101ff30 04053003 0e060355 1d0f0101
  ff040403 1f060355 02018630 230418 30168014 0cea70bf 0d0e0c4b eb34a0b1 1 d
  8242 has 549 0603 551d0e04 1604140c ea70bf0d 0e0c4beb 34a0b182 301D 5183ccf9
  42a 54951 010105 05000382 0101004e 7bfe054a 0d 864886f7 0d06092a 83ccf930
  d434a27c 1d3dce15 529bdc5f 70a2dff1 98975de9 2a97333b 96077966 05a8e9ef
  bf320cbd ecec3819 ade20a86 9aeb5bde bd129c7b 29341e4b edf91473 f2bf235d
  9aaeae21 a629ccc6 3c79200b b9a89b08 bf38afb6 ea56b957 4430f692 a 4745, 411
  34d71fad 588e4e18 2b2d97af b2aae6b9 b6a22350 d031615b 49ea9b9f 2fdd82e6
  ebd4dccd df93c17e deceb796 f268abf1 881409b 5 89183841 f484f0e7 bd5f7b69
  ebf7481c faf69d3e 9d24df6e 9c2b0791 785019f7 a0d20e95 2ef35799 66ffc819
  4a77cdf2 c6fb4380 fe94c13c d4261655 7bf3d6ba 6289dc8b f9aad4e1 bd918fb7
  32916fe1 477666ab c2a3d591 a84dd435 51711f6e 93e2bd84 89884c
  quit smoking
  crypto isakmp identity address
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate outside_mgts port 443 customer service
  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
  Crypto ikev1 allow inside
  Crypto ikev1 enable outside_mgts
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  without ssh stricthostkeycheck
  SSH 10.1.72.0 255.255.255.0 inside
  SSH timeout 60
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  vpnclient Server 91.188.180.X
  vpnclient mode network-extension-mode
  vpnclient nem-st-autoconnect
  VPN - L2L vpnclient vpngroup password *.
  vpnclient username aradetskayaL password *.
  dhcpd auto_config outside_mgts
  !
  dhcpd update dns replace all two interface inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL-trust ASDM_TrustPoint0 inside point
  SSL-trust ASDM_TrustPoint0 outside_mgts point
  WebVPN
  Select outside_mgts
  internal GroupPolicy_91.188.180.X group strategy
  attributes of Group Policy GroupPolicy_91.188.180.X
  Ikev1 VPN-tunnel-Protocol
  internal group VPN - ST strategy
  attributes of group VPN - ST policy
  value of 195.34.31.50 DNS Server 8.8.8.8
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value VPN-ST_splitTunnelAcl
  by default no
  aradetskayaL encrypted HR3qeva85hzXT6KK privilege 15 password username
  tunnel-group 91.188.180.X type ipsec-l2l
  attributes global-tunnel-group 91.188.180.X
  Group - default policy - GroupPolicy_91.188.180.42
  IPSec-attributes tunnel-group 91.188.180.X
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  remotely IKEv2 authentication certificate
  pre-shared-key authentication local IKEv2 *.
  remote access to tunnel-group VPN - ST type
  VPN-general ST-attributes tunnel-group
  address vpnpool pool
  Group Policy - by default-VPN-ST
  tunnel-group ipsec VPN ST-attributes
  IKEv1 pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the icmp error
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:212e4f5035793d1c219fed57751983d8
  : end

  door-71 # sh crypto ikev1 his

  There are no SAs IKEv1

  door-71 # sh crypto ikev2 his

  There are no SAs IKEv2

  door-71 # sh crypto ipsec his

  
  There is no ipsec security associations
  door-71 # sh crypto isakmp

  There are no SAs IKEv1

  There are no SAs IKEv2

  Global statistics IKEv1
  The active Tunnels: 0
  Previous Tunnels: 0
  In bytes: 0
  In the packages: 0
  In packs of fall: 0
  In Notifys: 0
  In the constituencies of P2: 0
  In P2 invalid Exchange: 0
  In P2 Exchange rejects: 0
  Requests for removal in his P2: 0
  Bytes: 0
  Package: 0
  Fall packages: 0
  NOTIFYs out: 0

  
  Exchanges of P2: 0
  The Invalides Exchange P2: 0
  Exchange of P2 rejects: 0
  Requests to remove on P2 Sa: 0
  Tunnels of the initiator: 0
  Initiator fails: 0
  Answering machine fails: 0
  Ability system breaks down: 0
  AUTH failed: 0
  Decrypt failed: 0
  Valid hash fails: 0
  No failure his: 0

  IKEV1 statistics for Admission appeals
  In negotiating SAs Max: 25
  In negotiating SAs: 0
  In negotiating SAs Highwater: 0
  In negotiating SAs rejected: 0

  Global statistics IKEv2
  The active Tunnels: 0
  Previous Tunnels: 0
  In bytes: 0
  In the packages: 0
  In packs of fall: 0
  In Fragments of fall: 0
  In Notifys: 0
  In Exchange for the P2: 0
  In P2 invalid Exchange: 0
  In P2 Exchange rejects: 0
  In IPSEC delete: 0
  In delete IKE: 0
  Bytes: 0
  Package: 0
  Fall packages: 0
  Fragments of fall: 0
  NOTIFYs out: 0
  Exchange of P2: 0
  The Invalides Exchange P2: 0
  Exchange of P2 rejects: 0
  On IPSEC delete: 0
  The IKE Delete: 0
  Locally launched sAs: 0
  Locally launched sAs failed: 0
  SAs remotely initiated: 0
  SAs remotely initiated failed: 0
  System capacity: 0
  Authentication failures: 0
  Decrypt failures: 0
  Hash failures: 0
  Invalid SPI: 0
  In the Configs: 0
  Configs: 0
  In the Configs rejects: 0
  Configs rejects: 0
  Previous Tunnels: 0
  Previous Tunnels wraps: 0
  In the DPD Messages: 0
  The DPD Messages: 0
  The NAT KeepAlive: 0
  IKE recomposition launched locally: 0
  IKE returned to the remote initiated key: 0
  Generate a new key CHILD initiated locally: 0
  CHILD given to the remote initiated key: 0

  IKEV2 statistics for Admission appeals
  Max active SAs: no limit
  Max in negotiating SAs: 50
  Challenge cookie line: never
  Active sAs: 0
  In negotiating SAs: 0
  Incoming requests: 0
  Accepted incoming requests: 0
  A rejected incoming requests: 0
  Out of requests: 0
  Out of the applications accepted: 0
  The outgoing rejected requests: 0
  A rejected queries: 0
  Rejected at the SA: 0 Max limit
  Rejected low resources: 0
  Rejected the current reboot: 0
  Challenges of cookie: 0
  Cookies transmitted challenges: 0
  Challenges of cookie failed: 0

  IKEv1 global IPSec over TCP statistics
  --------------------------------
  Embryonic connections: 0
  Active connections: 0
  Previous connections: 0
  Incoming packets: 0
  Inbound packets ignored: 0
  Outgoing packets: 0
  Outbound packets ignored: 0
  The RST packets: 0
  Heartbeat Recevied ACK packets: 0
  Bad headers: 0
  Bad trailers: 0
  Chess timer: 0
  Checksum errors: 0
  Internal error: 0

   
  door-71 # sh statistical protocol all cryptographic
  [Statistics IKEv1]
  Encrypt packets of requests: 0
  Encapsulate packets of requests: 0
  Decrypt packets of requests: 0
  Decapsulating requests for package: 0
  HMAC calculation queries: 0
  ITS creation queries: 0
  SA asked to generate a new key: 0
  Deletion requests: 0
  Next phase of allocation key applications: 0
  Number of random generation queries: 0
  Failed requests: 0
  [Statistics IKEv2]
  Encrypt packets of requests: 0
  Encapsulate packets of requests: 0
  Decrypt packets of requests: 0
  Decapsulating requests for package: 0
  HMAC calculation queries: 0
  ITS creation queries: 0
  SA asked to generate a new key: 0
  Deletion requests: 0
  Next phase of allocation key applications: 0
  Number of random generation queries: 0
  Failed requests: 0
  [IPsec statistics]
  Encrypt packets of requests: 0
  Encapsulate packets of requests: 0
  Decrypt packets of requests: 0
  Decapsulating requests for package: 0
  HMAC calculation queries: 0
  
  ITS creation queries: 0
  SA asked to generate a new key: 0
  Deletion requests: 0
  Next phase of allocation key applications: 0
  Number of random generation queries: 0
  Failed requests: 0
  [SSL statistics]
  Encrypt packets of queries: 19331
  Encapsulate packets of queries: 19331
  Decrypt packets of queries: 437
  Package requests decapsulating: 437
  HMAC calculation queries: 19768
  ITS creation queries: 178
  SA asked to generate a new key: 0
  Requests to remove SA: 176
  Next phase of allocation key applications: 0
  Number of random generation queries: 0
  Failed requests: 0
  [Statistical SSH are not taken in charge]
  [Statistics SRTP]
  Encrypt packets of requests: 0
  Encapsulate packets of requests: 0
  Decrypt packets of requests: 0
  Decapsulating requests for package: 0
  HMAC calculation queries: 0
  ITS creation queries: 0
  SA asked to generate a new key: 0
  Deletion requests: 0
  Next phase of allocation key applications: 0
  Number of random generation queries: 0
  Failed requests: 0
  [Statistics]
  Encrypt packets of requests: 0
  Encapsulate packets of requests: 0
  Decrypt packets of requests: 0
  Decapsulating requests for package: 0
  HMAC calculation queries: 6238
  ITS creation queries: 0
  SA asked to generate a new key: 0
  Deletion requests: 0
  Next phase of allocation key applications: 0
  Number of queries random generation: 76
  Failure of queries: 9

  door-71 # sh crypto ca trustpoints

  Trustpoint ASDM_TrustPoint0:
  Configured for the production of a self-signed certificate.

  Trustpoint ASDM_TrustPoint1:
  Configured for the production of a self-signed certificate.

  If you need something more, then spread!
  Please explain why it is that I don't want to work?

  Hello

  When the IPSEC tunnel does not come to the top, the first thing comes to my mind is to run a tracer of package from the CLI and the phases in it. Please run this command from your firewall side and share the output. I've just compiled this command with the random ip address and ports of your given range.

  Packet-trace entry inside tcp 10.1.72.2 1233 10.1.61.2 443 detailed

  Best regards

  Amandine

• Two IPSec VPN on an interface does not

  Hello

  I'm actually trying to bring two IPSec VPN on a single interface. I managed to create a tunnel between hand and Barcelona and between by and Mad. But I can't create it between Barcelona and Mad.

  We have a cisco ISR1921 Mad Barcelona and a nominal Netgear.

  Config of Barcelona:

  
crypto isakmp policy 10encr 3desauthentication pre-sharegroup 2lifetime 28800crypto isakmp key PAR_KEY address PAR_IP no-xauthcrypto isakmp key MAD_KEY address MAD_IP no-xauth!!crypto ipsec transform-set ESP_3DES_MD5 esp-3des esp-md5-hmaccrypto ipsec transform-set ESP_3DES_SHA1 esp-3des esp-sha-hmaccrypto ipsec transform-set ESP_3DES esp-3des!crypto map outside_map 10 ipsec-isakmpset peer MAD_IPset transform-set ESP_3DES_SHA1set pfs group2match address 120crypto map outside_map 20 ipsec-isakmpset peer PAR_IPset transform-set ESP_3DES_SHA1 ESP_3DES_MD5 ESP_3DESset pfs group2match address 110access-list 110 permit ip 10.40.42.0 0.0.1.255 10.20.42.0 0.0.1.255access-list 120 permit ip 10.40.42.0 0.0.1.255 10.60.42.0 0.0.1.255

  Crazy conf:

  crypto isakmp policy 10encr 3desauthentication pre-sharegroup 2lifetime 28800crypto isakmp key PAR_KEY address PAR_IP no-xauthcrypto isakmp key BARCELONE_KEY address BARCELONE_IP no-xauth!!crypto ipsec transform-set ESP_3DES_MD5 esp-3des esp-md5-hmaccrypto ipsec transform-set ESP_3DES_SHA1 esp-3des esp-sha-hmaccrypto ipsec transform-set ESP_3DES esp-3des!crypto map outside_map 20 ipsec-isakmpset peer PAR_IPset transform-set ESP_3DES_SHA1 ESP_3DES_MD5 ESP_3DESset pfs group2match address 110crypto map outside_map 30 ipsec-isakmpset peer BARCELONE_IPset transform-set ESP_3DES_SHA1set pfs group2match address 120access-list 110 permit ip 10.60.42.0 0.0.1.255 10.20.42.0 0.0.1.255access-list 120 permit ip 10.60.42.0 0.0.1.255 10.40.42.0 0.0.1.255

  Now the weird part:

  I have absolutely NO LOG AT ALL. I don't have them when the tunnel with normal is negotiated, but I have absolutely nothing to Mad-Barcelona. Not even an error message or anything like that.

  Negotiations between Barcelona and the Mad is nowhere.

  Someone has an idea, what happens?

  I'm thinking that he might not start the tunnel and does not all newspapers:

  -you see all success in the used card encryption access list?

  -is it possible that there is a problem of connectivity between sites?

  -There is a NAT (or PAT) which may affect the set of addresses?

  -is it possible that routing to one of the sites is not going through the interface that has the encryption card?

  Maybe if you post production show card crypto that there could be a few clues about the problem?

  HTH

  Rick

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Satellite 2800 - BIOS does not recogize Toshiba 40 GB HARD drive

  I have an old Toshiba S2800 (if-200 questions in total). He was works very well with a 10 GB HARD drive for ages. Yesterday, I thought that putting his hard drive to a bigger.
  Removed the old and installed a new hard drive, Toshiba MK4026GAX. On the power on the BIOS does not detect the HARD drive at all. I can hear the humming noise (platter (s) rotating), but apart from that, there is nothing. The BIOS indicates disk mode HARD is "unused" and also on page 2 is none shown on the primary hard disk IDE channel. (tried to boot Linux from a CD to see if who sees anything on the IDE channel, but apparently the primary IDE channel is disabled if the BIOS does not detect a master or a slave connected device). Change the mode of the master to the slave na HARD drive? t change a thing.
  The BIOS version is 2.00. Tried to find an older one without success.

  I thought that the BIOS has a limit of 32GB, but when I connect a 120 GB hard drive (WD scorpio), it has been recognized by the BIOS and the PC was ready to boot from the device.

  I would have thought computers laptop Toshiba were at least compatible with another device (e.g. hard drive) Toshiba

  Someone has any idea how to operate?

  Thanks in advance!
  Robbie

  Hello

  It of very strange that the 120 GB HDD has worked on your old Satellite 2800 unit.
  I know that the BIOS would not recognize these large HARD drive sizes.

  In any case, seems the purchased disk is not compatible with your laptop and you can buy one that is supported.
  I discovered that the 20 GB HDD MK2016GAP could be compatible
  http://www3.Toshiba.co.jp/storage/English/spec/HDD/mk2016.htm

• Virtual router does not work-«the group or resource is not in the appropriate State to make the request in question»

  I installed virtual router manager v1.0 but his does not work. When I leave router virtual by connection to the local network from my laptop, its shows an error. It is «the group or resource is not in the appropriate State to make the request in question» Please give me the solution of this problem. I want to start the virtual router and use the internet connection with other devices.

  I installed virtual router manager v1.0 but his does not work. When I leave router virtual by connection to the local network from my laptop, its shows an error. It is «the group or resource is not in the appropriate State to make the request in question» Please give me the solution of this problem. I want to start the virtual router and use the internet connection with other devices.

  Thank you so much for viewers. Virtual router works properly. I use internet for my laptop for my other devices.

• F380 printer with a USB modem / router does not work as a scanner

  Hello, I have a Hp F380 printer I've always used on my PC, in Windows 7, via the USB port.

  Given the need to print and scan from another PC on the same router modem, I tried to use the USB port master who is mounted on my modem router (Alice Gate VoIP 2 Plus Wi Fi), to which I have connected the F380 to share with the new PC.

  I followed the steps in the manual installation of the modem and everything was fine except for the use of the scanner.
  The scanner, you can not use because the HP Solution Center does not see the device if it is connected to a USB port on the local PC (I normally, I used this for my scans)

  Even try to use scanning directly from the "devices and printers", click the right button of the mouse over the device icon in the menu window F380 does not appear the scanning features that appear in the place when the F380 is connected to a USB port on the local pC.
  I also tried to analyse using paint, Windows live photo gallery and scanner and fax in Windows, but the problem is always the same: the scanner is not detected.

  Do you have a solution for this?

  Thank you very much

  Hello

  The scanner cannot be access via a shared printer. The printer must be connected directly to the device, or you must connect using a standard network connection.

• ESXi-> Cisco 3850-> router upstream routing does not

  Please see the attached diagram.

  I currently have the installation of "router on the stick" and I move to lass on Cisco 3850 battery. Initially, I moved VLAN100.  I can ping to each of the directly connected devices (i.e. the router 3850 and 2911). I can't do a ping to a virtual machine on vlan 100 router and vice versa. Here's what works what doesn't work.

  Work in both sense

  VM (172.16.100.51) <->GW on IVR (172.16.100.254)

  VM (172.16.100.51) <->an another IVR (172.16.230.254)

  VM (172.16.100.51) <->Int L3 on 3850 (10.2.2.2)

  L3 on 3850 (10.2.2.2) int <->int L3 on 2911 (10.2.2.1)

  SVI on 3850 (172.16.100.254) <->int L3 on 2911 (10.2.2.1)

  Does not not in both directions:

  VM (172.16.100.51) <->L3 interface on 2911 (10.2.2.1)

  VM (172.16.100.51) <->else NOT routed on 3850

  I have following routes on 2911 and 3850.

  3850:
  IP route 0.0.0.0 0.0.0.0 10.2.2.1

  2911:

  IP route 172.16.100.0 255.255.255.0 10.2.2.2

  IP route 172.16.230.0 255.255.255.0 10.2.2.2

  If in theory everything that comes from 172.16.100.51 no 3850 premises must be sent to 10.2.2.1 since it is the default route on 3850.

  I suspect that this is a problem with the license. I have IP Base feature set stack license 3850. I have checked using the license to show and display the version controls.

  According to this FAQ Cisco, http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-..., routing should work because I do not have more than 16 static routes and I'm only using base L3 routing features.

  I am at a loss here. What is going on? Can someone please confirm?

  I bought WS-C3850-24 t-S,

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3850/software/...

  thinking that I would be able to use Lass and keep all traffic to get into the routers as switches upstream of our most ancient were only L2.

  It looks like an upgrade for all IP Services features is possible.

  https://cisco3850.wordpress.com/2015/04/22/licensing-for-cisco-catalyst-....

  That I have to upgrade the image so or can I just pass the license using the built-in commands described here.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3850/software/...

  I hope that I don't have to reboot switches because this configuration is currently using this stack as the core and distribution.

  Any help is appreciated.

  Thank you

  Turning and the "IP routing" did?

• ASA 8.3 VPN site-to-site does not UDP traffic to other peer

  Hello!!!

  Someone turned off the lights :-) I say this because that's 6.2 6.3 I can't get the basic things...

  On a SAA, I created a "site-site" VPN profile to connect to a remote site, on the other side (ASA 8.2) sees no problem, I can pass all IP traffic via VPN without NAT; but on a new ASA5505 with 8.3 (1) version fw and ASDM 6.3 (1) can't do that in any way :-(

  What I get is trivial...

  ... It works perfectly with TCP and ICMP traffic, but does not have UDP traffic: in practice, if I followed the traffic to a remote private IP, TCP and ICMP traffic I see only packets in vlan "inside" with the private IP, but with the UDP traffic on top of that, I see traffic on vlan 'out' with the IP public ASA and source port changed :

  Inside: UDP to 172.16.2.128:6000 to 172.16.0.200:6000
  Outside: UDP to 5.5.5.5:23400 to 172.16.0.200:6000

  Why?

  Of course, the traffic is not encrypted and does not reach the other side of the tunnel!

  Here are the important parts of the configuration:

  interface Vlan1
  nameif inside
  security-level 100
  172.16.2.1 IP address 255.255.255.0

  network obj_any object
  subnet 0.0.0.0 0.0.0.0

  remote network object
  172.16.0.0 subnet 255.255.254.0

  outside_cryptomap to access extended list ip 172.16.2.0 allow 255.255.255.0 network remote control object

  NAT (inside, outside) static source any any destination static remote-remote network

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  card crypto outside_map0 1 match address outside_cryptomap

  outside_map0 card crypto 1jeu pfs

  card crypto outside_map0 1 set ip.ip.ip.ip counterpart

  outside_map0 card crypto 1jeu nat-t-disable

  outside_map0 interface card crypto outside

  Given that the new business object, I have not yet quite clear (ok, I don't find time to do a deep reading of the documentation), someone is able to direct me to fix this trivial?

  Note: If I remove my drive manual nat and I flag "network translating" on the remote network object thus indicate that they want NAT with ip network remote control then don't work any IP vs. remote site traffic. Why, why have not more than the simple rules of 'nat exception' the old version and why the crypto-plan applies only to TCP traffic? Possible that there is an object any which takes all IP traffic?

  A big thank you to all.

  73,

  Arturo

  Hi Arturo,.

  I know that there is a certain NAT related bugs in 8.3 (1) and although I don't remember a specific which corresponds to your symptoms, I would say you try 8.3 (2) instead, or maybe even the last available version of a temp (currently to 8.3 (2.4):)

  http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=8.3.2+Interim&mdfid=279916854&sftType=Adaptive+Security+Appliance+%28ASA%29+Software&optPlat=&nodecount=9&edesignator=null&modelName=Cisco+ASA+5510+Adaptive+Security+Appliance&treeMdfId=268438162&modifmdfid=&imname=&treeName=Security&hybrid=Y&imst=N

  If you still see the problem, then, check

  entry Packet-trace within the udp 172.16.2.2 1025 172.16.0.1 detail 123

  entry Packet-trace inside tcp 172.16.2.2 1025 172.16.0.1 detail 123

  and check what's different.

  HTH

  Herbert