Hi, I'm clueless... totally computer Robyn. I think "siteranker" is my problem. I can't remove. Are there really people out there kind enough to help? Thanking you in advance, Robyn

Similar Questions

• When I turn on my computer, it goes to the Microsoft connection. How can I remove this item and go directly to my Start Page

  Recently had computer problems, now when I turn on my computer I had to go through Microsoft sign on the page before I can access my Start Page.  How can I remove this and have my Start Page to come once the computer has developed?

  This should solve your problem:

  "How to turn on automatic logon in Windows XP"
    <>http://support.Microsoft.com/kb/315231 >

  HTH,
  JW

• I recently updated my computer (the thing has changed since the problem) and now my LAN is enabled at startup, even if I turn it off before you stop. Why? And how can I stop this?

  Since my last update, that is the only thing changed on my computer since it began, my lan port is always on at the start of Vista (Ultimate).   I'm on a laptop that has a LAN on board.  I have not had this problem NEVER before and have owned the laptop for about two years now.    The only thing that has changed on the computer's windows updates.

  I spent the length of a deactivation of the adapter before you turn off the laptop and tried to load a page that is not in the temporary memory, and get the usual page cannot be displayed.  I scanned for virus using AVG and Bell Internet Security scanner online McAfee.   I also ran Windows MSRT and found nothing unusual.   I also checked to see if the BIOS has been changed somehow, and nothing has changed.   Boot to LAN is disabled.   So I can only conclude that I have a virus has not been detected (but have no slowdowns or anything different in the security under gpedit.msc logs), or the more recent Windows Update changed some settings.

  But weak and this is every time I start up the computer from the local network is enabled.   If I let the cable disconnected at startup, it does not reconnect to the modem cable after rehabilitation and I have to disable and then re-enable the LAN to access the internet.

  Please let me know if anyone else has this problem or have heard of this and know a solution.

  Thank you.

  Leqs D.

  Hi Lequarius,

  ·          You receive an error message when you restart?

  Method 1

  I suggest that you download and install the updated drivers for the network adapter on the computer by visiting the card manufacturer or computer manufacturer website manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I would suggest that temporary you disable the security software installed on the computer and check if the problem persists.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

• can I clear the memory on my computer, it has 1.5 million points that I can't remove. computer is 5 years old

  Can I delete or partially empty the memory on my computer. It has about 1.5million items dating back 5 years that I can't get rid of, and the memory is almost full.

  Hello

  The term 'Secondary memory', not 'memory', has been / is used to describe hard drives, etc. (it went out of use by a lot of people lately).

  http://wiki.answers.com/Q/What_is_the_difference_between_primary_memory_and_secondary_memory

  Try using this free program to see what is stored on your hard drive and taking space:

  http://www.Jam-software.com/freeware/

  And this is the Microsoft Information on the use of disk cleanup:

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  See you soon.

• I imported my last computer profile, but I can't find a way to make it active, and if records help says you can change profile, there is no indication how to proceed.

  I put the file in the Profiles folder and deleted the default profile, but nothing happens and I can't find an instruction in the menus to change profiles, nor anything in the fact sheets help to explain how.

  You must copy the file profiles.ini so or create a new profile and choose the imported profile as the location of this new profile make Firefox recognize and use it.

  • http://KB.mozillazine.org/profiles.ini_file
  • http://KB.mozillazine.org/Recovering_a_missing_profile

• The Adobe Creative Cloud installation program will not accomplish instalation on my computer Windows 10 please help as to what other options can I use to download and install the creative cloud. Please and thank you

  Adobe Creative Cloud

  Could you please try to download & install by direct download links:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  2015 all updates of Adobe CC: Direct for Windows download links | ProDesignTools

  Please follow them: very important

  Concerning

  Stéphane

• I deleted all THE files of rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB drive. Total area of libraries: 650 GB still Get Info says I use 2 100 GB! Any ideas? Thank you.

  I have deleted all THE files in my libraries FCPX rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB external drive. The total size of my libraries is 650 GB (when I add up the individual), but when I click on read the information for the reader, it says that I use 2 100 GB! It does not show that everything is on the disk. I went in each library individually in FCPX and deleted all THE files of rendering.  Reducing the total size of several concerts, but there are still almost 1 500 GB difference.

  I tried to copy all libraries on another drive and they occupy only 650 GB (with no unidentifiable used disk space). I'm a bit confused.  Someone at - it ideas?  I would like to release 1.5 TB that starting to use the new hard disk with only 650 GB and reformat the drive, but if there is some kind of hidden, important files on the original drive as FCPX needs to work properly I won't ruin the hundreds of hours I spent on editing. I hope that all makes sense. Thank you in advance.

  I use an iMac 27 "with 3.4 GHz Intel Core i7, 8 GB of memory, NVIDIA GeForce 1024 MB graphics, OS X Yosemite 10.10.5, FCPX 10.2.2 3 TB Seagate USB 3.0 external hard drive designed for Mac and format Mac OS extended (Journal)

  That doesn't sound right. The sound of back numbers compared to what could happen.

• I'm trying to transfer video from my computer to my external hard drive portable verbatim. I need instructions step by step please. Thank you.

  The videos are in my film browser.

  Hello KAMKATCHKA,

  Thank you for visiting the Microsoft answers community.

  Is your installed and available on your computer external HARD drive?

  You can simply drag and drop files to the location on your computer to the location on your external HARD drive that you want to save the files to.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Passport 1 TB is not recognized by my computer and the other computer. Please tell me how to solve this problem, because my files important in there.

  My WD 1 TB passport is not recognized by my computer and the other computer.  He will ask the same WD SES usb driver on the other computer. Please tell me how to solve this problem, because my important files are there. I already downloaded and installed WD smartware program but it still does not work.

  Hello

  The disk hard external does not get recognized in the other computer, there seems to be a problem with your hard drive.

  You can try to change the USB cable that lets you connect the hard drive to the laptop and check if it is detected.

  You can also see at the suggestion of this link.

  If the problem persists, contact the WD Support.

  http://community.WD.com/

  Hope the above information is helpful.

• I need to reformat my computer today and I want to know if I can recharge my photography cc pass after that or I have to start over.

  I was wondering if someone can help me with this question. I need to reformat my computer today and I need to know if I can charge my cc photography subscription without having to start over.

  After you disconnect and then reformat, you can reinstall. Please refer to these documents, as appropriate:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

• Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

  Hello

  I have my desktop (Windows XP) connected via a cable to a LinkSys WRT54GC wireless router and wireless HP Photosmart B109n-z connected wireless. I can 'see' desktop printer if I write the IP address of the printer in the browser, but printing does not work.

  I don't know how to set up the printer to print from this desktop computer. What I choose when installing printer drivers (printing via USB or wireless?). I tried manually installing printer but without success. Do I have to set up specific ports?

  Printing from laptop (connected wireless to the router) works perfectly.

  Thank you in advance for your answer, I'm really lost on this one.

  Choose print wireless while installing the software.  Because the printer is connected to your router, you don't need to go through «setup USB wireless»

  I'll try to manually add again in this way:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Hello. I installed the trial versions of 2014 CC Photoshop and Lightroom 5.6 (ie the plan of photography) on a desktop computer that I've added a new drive in Windows 7. Everything works well, BUT it's an old computer, and I think he could pack up unexpe

  Hello. I installed the trial versions of 2014 CC Photoshop and Lightroom 5.6 (ie the plan of photography) on a desktop computer that I've added a new drive in Windows 7. Everything works fine BUT it's an old computer and I think he could pack up unexpectedly. These things are happening. I want to sign up for the plan of photography but I also a Windows Vista laptop, and it's old too so I can put apps on a new office and a new laptop computer, after you have already installed on my desktop. That is why three activations. Am I allowed to do? See you soon. Paul

  You can't have three activations. It is simply not possible technically. If and when the time comes, just disable you / disconnect is on one of the old systems and install it on the new. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and resist it.

  Mylenium

• Computer purchased Photoshop Elements 9, I wiped. What can I do?

  So I downloaded a trial version of 9 items and bought the serial number for it. And because items has been updated to 10, what can I do? My computer has a bad enough virus to this subject and there is no other choice, but have wiped it so I lost all my programs. Photos and videos were recorded if. So my question is can I download 10 items and use my serial number or what? Thank you!

  You cannot use the serial number of the 9 Elements with the installation of 10 items, it will not work for you.

  You have to get the installtion Elements 9 media and then you can use your serial number.

• Computer HP laptop-15-AY012DX: what is the maximum can RAM my HP for computer laptop-15-AY012DX going up?

  Hi all

  I lost my manual book and I have a problem to find the what is the maximum can RAM that my HP for computer laptop-15-AY012DX is going up? Your help is appreciated.

  Thank you and best regards.

  Hello

  According to PartSurfer your laptop has DDR4, read it again:

  http://PartSurfer.HP.com/search.aspx?SearchText=X0S24UA

  http://h10032.www1.HP.com/CTG/manual/c05087748

  Memory module (PC4, 17000, 2133 MHz)
  For models with 6 processors Intel Core of generation:
  8 GB 820570-005
  4 GB 820569-005
  2 GB 851379-005

  Two non-customer-accessible/expandable memory
  housing for module (Intel processors)
  Supported dual channel DDR4-2133

  Supports up to 16 GB of RAM in the following conƭgurations

  16384 MB total system memory (8192 × 2)
  12288 MB ● total system memory (8192 × 1).
  + (4096 × 1).
  ● 8192 MB total system memory (8192 × 1) or
  (4096 × 2)
  Total 6144 MB ● system memory (4096 × 1).
  + (2 048 × 1).
  ● total 4096 MB system memory (4096 × 1) or
  (2048 × 2)
  ● total 2048 MB system memory (2 048 × 1).
  Two non-customer-accessible/expandable memory

• Peripheral USB works intermittently on XP computer at startup. the Office of other problems, why?

  There are three 7 port usb hubs in a string, (all connected each), first of all, one from the computer, more a fourth with four ports connected to a Dell usb keyboard, which itself is connected to one of the hub 7 ports.

  Sometimes the lights mounted on all four centers, but it's a matter of holding your breath until he died which means the devices connected to them also does not work.

  Only one connected in the light of the computer is turned on, but even in this case, devices attached (like a usb keyboard), does not always work. They are all 2.0 but the computer is 1.0 I believe.

  On the desktop, they usually receive regular work but the desktop freezes, BSOD and endless error messages, especially during video playback or attempt to use the webcam in reports.

  Discovered today that you must enable USB in the bios. So far, who has worked, which means that there is no error reports or BSOD, nagging but the computer has not been extinguished at all since finding this out is the answer or is this something else?

  * There is another PS/2 keyboard and a mouse that is always attached now especially when you use a CD, (like XP). have to use the boot CD 'aid' like Acronis or having to access something in the bios, these devices are the only things that work like computer starts.* *.

  * Haven't had no idea where to put this, but the defalult was, "Performance and Maintenance", which I don't have on my computer so I just guess he's right.

  Thank you, but do not want to touch the registry.

  Never did not understand why he has often given it as a resolution, knowing he could totally botch a computer novice would have no idea how to solve this problem. His pan to the fire.

  Anyway thank you all for having tried to prevent him from thinking that the problem is resolved.

  It seems to enable USB in BIOS, it set as the hubs knitting every time and no. become as much error messages.

  Takes some time in the BIOS, but it is nowhere as long as it was and now the ps/2 keyboard and mouse connected helps again.

  Tried using usb ps2 adaptors but they were next useless.

  Too bad, if they had worked, probably would not need other HID devices as backup :/