Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

Similar Questions

• Why need a cable modem from a router can send and receive information to a computer?

  Why need a cable modem from a router can send and receive information to a computer?

  On Fri, 14 September 2012 17:14:59 + 0000, stuckfree wrote:

  Why need a cable modem from a router can send and receive information to a computer?

  A router is a device that connects computers (or other type of computer
  devices) to each other on a network and you can send files
  from one computer to the other. It does not connect to the internet, and
  you need a device called a modem vaguely to do this. The modem also
  connects to the router and allows the computers on the network
  (those connected to the router) to connect to the internet.

  However, note that there are some available devices that are
  router-modem combination. If your router is of this type, you do not have
  need a modem.

  Ken Blake, Microsoft MVP

• How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a PXI machine CAN

  How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a machine PXI CAN?

  I tried using a DAQ Assistant, but the port is not included as one of the physical channels supported, even if all his drivers are up to date.

  Help, please...

  Thank you.

  If you can read it in MAX, then you should be able to run the NI CAN example.

  Help-> find examples

  Find the CAN and watch CAN Receive.vi.

  Basically, set up the network, open the object, read in a loop close object when it is done.

  If you have any questions about the example, go ahead and post your vi and we can work from there.

• New smartphone BlackBerry storm not no projection in 'My computer' as a disc as my old Storm was when connected via USB cable

  I got a new storm that I see in BB Desktop Manager and see it of identification number and can see the contents of the 8 MB card, but I do not see the storm in my computer as a drive, as I have for my old storm when I connect it via USB cable.

  I used to connect my old Storm and autoplay would jump to the top and I see map of the storm and the internal memory as two disks support.  Nothing shows here now...

  I checked to make sure that autoplay is always set to "always ask" when my phone is connected.  I double checked to make sure that the new storm was set ON media, NULL encryption Support, ON Media transfer, Mass storage support, Auto enable Mass Storage when logged ON, etc.

  The card is fine, I've recorded videos, photos and play music off it all the time and I can transfer items to using very slow BB Media Manager but I prefer to use the quick method when it is recognized as a drive.

  Why it used to work on the old storm, but not on this new?

  I read on some other fourms when you think you've found a new replacement Storm you get really a refurbished and for some reason that those who have a whole mass storage setting where the mode is disabled?

  Storm 9530

  v 4.7.0.148 (4.0.0.181 platform)

  Thanks in advance for any advice I can get!

  Judson

  Before I had a chance to even try your recommendation, I found a link on these forums for this file that I mentioned.  I'll be darn it worked... now my BB appears in my computer under two drives, and Media Sync works!  Problem solved!

  It won't let me put the hyperlink to the forum page but a search for ' Blackberry Media Sync could not connect to your BlackBerry smartphone.

  So who has a link to the forums on pinstack.com and you have to register with them to get the file, and then extract the RAR with Winzip file and in this file, I ran the file BB"storage"Activation with the connected BB again, which opens a DOS command prompt, you hit then any key to continue, then unplug. , wait that the BB restart, then Viola... it works again!

  Judson

• Customer WRVS4400N wireless doesn't have internet access, unless first connected via a cable

  Hi all

  I recently bought a security WRVS4400N router and have a strange problem with it. I have set up as my main router and two computers (a desktop and a server) by using DHCP. Both work very well, internet is as quick as it should be, no problem.

  However, when I set up the Wifi SSID (some security options I use, even with open/wpa/wpa2) and connect to my laptop. It is assigned an IP address and windows said that there is an internet connection. As soon as I try to do something good, I fell. Try to ping an external server, failure and dropped. Open IE, failure and dropped. I can't access my local server connected by wire to the router.

  If I connect to the laptop via a cable to the router everything works, and he continues to work when I unplug it. So that means that right now, I walk on to the router and connect my laptop for 3 seconds before you unplug the unit and then use the wifi for a couple of hours with no problems. But as soon as I try to turn on my wireless Logitech SqueezeBox or the wireless printer, they fail and take my cell phone with it...

  I have:

  reset the router, used the two firmware 2.0.2.1 and 2.0.1.3 and did a factory reset.

  Tried moving the router near the laptop, no difference.

  Does anyone have an idea on what could be my problem?

  /Thomas

  If you have received if from NewEgg as a refurbished.  Call Cisco Technical Support and open a ticket for her. Mine is returned to them for the same kinds of questions.

  Expect to be without it for a while, they told me within 24 hours of receipt, my replacedment would be sent.  They had for 3 days and counting... learned to love the tracking information.

• C6380 - computer laptop xp prints with connection by usb cable but not wireless

  Hello

  I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

  I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

  I installed the software on a computer vista laptop that is wireless and prints well.

  I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

  I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

  I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

  I put the printer with a static ip address.

  I restarted the router as well.

  The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

  Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

  I'm pretty good with pc / networks etc but have now run out of ideas.

  Can someone help me please?

  Thanks in advance.

  Steve

  Hello

  I've actually solved myself, but I'll keep this post here anyway.

  The answer has been upgraded from SP2 to SP3.

  Probably should have thought about that a little bit earlier!

• HP 550-015 a DNX DT desktop: Ethernet connection for HP 550-015 has a router Netgear Wireless D6300 desktop PC.

  I have connected an ethernet cable from my router Netgear, D6300 wireless, to my DT DNX 550-015 a newly purchased HP desktop computer and I can't get the connection work with internet access.

  When I look at the State of the network and its connections, I find that the Ethernet connection is a "unidentified public"network"and that there is" "no access to the network.

  If I make the same connection to the Netgear router to my OLD HP laptop Pavilion I immediately have an ethernet internet access.

  Why I can't access ethernet Internet on m y new desktop computer.

  Daggles

  Hi @Daggles,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the wired network connection. I'll be happy to help you.

  Please follow the steps in Troubleshooting Wired Home networks (Windows 10).

  Please let me know if this information is useful to solve the problem by marking this message as 'Accept as Solution', this will help others find information easily.

• My desktop computer is displayed on my network card, but I can't connect my laptop and share files

  My desktop and laptop running windows vista 64-bit.  I used to be able to open the files on my laptop that were stored on my desk but now I can't make the connection.  When I look at my network devices, the desktop but I can always see it on the network map.  The only thing that has changed is I had to replace my router, but I do change all the settings.

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-computers-on-a-home-network

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  It will be useful.

• I have Mozilla Ffox on a Dell Vostro Desktop computer, connected to a HP-Officejet 6500. The printer prints internal drive, but don't print Web sites. The printer ejects only a single sheet of blank paper.

  The version of Firefox 4.0.1 and Windows 7 operating system are
  correctly identified below.
  Still, my printer prints not websites, including Yahoo mail. The printer seems to respond to Web sites, but only ejects a single sheet of blank paper when printing is initialized.

  Just to be sure, everything is covered:

  1. Reset you all the preferences of print.printer , as indicated in brackets in step 2, who were in "BOLD", not only print.print_printer preference?
  2. You you exit Firefox (Firefox button > exit OR file > exit, if you use the Menu bar), and then wait a few seconds and restart Firefox before testing the change according to step 4?
  3. I have a HP 6200 series. Don't forget, if yours is a multifunction printer that you have NOT enabled the fax (i.e., "HP Officejet 6200 series" NOT 'HP Officejet 6200 series fax') in the name field of the printer on the screenshot (CTRL + P).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Help on the portable computer connection on the desktop and router WRT610N

  I just bought a WRT610N and have loaded in my office which is not wireless and connected to my cable modem and the router on the desktop so that I can get the Wi - Fi of my wireless control internal Laptop Dell Insperion 1501.  My laptop shows my network I have install on the desk top and there are 4 bars green connection excellent, but it does NOT connect to the INTERNET.  How can I fix it?    Please help me sooooooonnnnnnnn.   Thank you very much.

  Try this,

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  2.4 GHz wireless settings:

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... Make sure your wireless connection is st to obtain the IP address automatically.

• can I use my wireless printer if it is connected to the main computer with the USB cable?

  My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.

  My question: can I use the printer to the host computer by USB and computer laptop through wireless?  If yes how to configure connections? Thank you.

  Hello

  A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.

  Kind regards

• Printing on a wireless active 8500 Pro from a desktop computer.

  So I'm wondering is, I can print to the printer pro 8500 wireless active even if the only wireless device is my router?  My office is connected to the router via ethernet cable.  The printing process of travel via the cable to the router and then to transmit wirelessly to the printer?   I hope that this issue has not been addressed; as I couldn't find the info at the end of 20 minutes, I decided to post.

  For get all answered in a post here is my situation. I have a desktop computer connected to a router via an ethernet cable, I have desktop computer connected to the printer via the usb port. I just bought a laptop. I want to set up a way to use the printer (8500 pro wireless) with the desktop and laptop, hopefully without having to connect to the laptop via a cable.  I know I have to remove the USB to use either a wired or wireless configuration.

  Thanks in advance.

  I short - YES.

  A router does not care how 'customers' are attached - wired or wireless - all devices can visit each other.

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• printer indicates 'no computer connected' PC 'offline' reports state ok

  Recently exchanged printer for new Hp officejet 4500g - m. Able to make beautiful best on the printer keypad.  Cannot print from windows 7 on my HP Pavilion. have you tried convenience of MS and HP times.untold several hours and still not be able to print from the computer.

  Twice - I uninstalled and reinstalled and got the success message. Printer shows as default printer on the PC. I even bought a new USB 2.0 thinking that my old cable might be the problem. Drivers have been updated - by windows update. I even bought the update service to see if that would cure the problem. No chance!

  The help on the Officejet screen reports no. computer connected. Pavilion shows HP 4500g - m as my default printer. status in the device screen and printers of Pavilion is not 'ready' State, simply [0 documents in the queue] - is it a clue? When I try to print my email - small order screen shows hp4500g-m as 'OFFLINE' and work is located. On PC, the error message is the mistake of the printer only. So, how can I change the offline online?

  The printer is fine "of printer status report. Reports 'Connectivity settings', which shows the status of the network offline. > This is not an area that I can access the printers keypad. Or I've just not found not yet.

  I work in progress - Please rush help. And since I can't print this application I record as on 30/07/2012 date and time 12:59

  Thank you

  Mickeyjms

  Hello

  I suggest that you disable SNMP (Simple Network Management Protocol) support for network printers.

  a. click Start , click devices and printers.

  b. right-click on the printer and select printer properties.

  c. click on the Ports tab, and then select Configure the Port.

  d. uncheck the box for SNMP status allow.

  e. find the question.