Hi problem in the whole of the sample of projects zone

Similar Questions

• Problems with the transfer of project of CS5 with Adobe dynamic link to CS5.5

  Hi all!

  Has anyone had the problem with the transfer of projects with Adobe CS5 at CS5.5 dynamic links?

  When I try to do the film hangs on to clips that are compositions of AE...

  The project of CS5 works perfectly.

  All the compositions of AE CS5 are transerred to AE CS5.5 compositions.

  All 'old' Adobe CS5.5 Pr project Hotlinks are replaced by the 'new' States (I mean, links for AE CS5 composition changed to links to the compositions AE CS5.5)...

  Any help will be appreciated

  Tried to play. Realize that a solution should be around redisplay, ' cos related compositions AE always displayed in yellow as if they were original footages - even I changed a composition within EI, just transitions, if they were, turns red in sequence Pr Pro...

  However, I was unable to re - make "Entire work" even after deleting all files of rendering, only 'effects in the work area.

  So I simply created a new sequence and copied and pasted all the clips of the original movie. Now, I have been authorized to "make any work area.

  This is!

• Problem with the sample project 'StampCollector '.

  Hello

  I'm new to the blackberry development.
  I'm just trying to build a sample project. but I always get warnings.
  So there's no way to build the project.
  Here's my warnings of the sample project "StampCollector":
  hope you can tell what I'm doing wrong. :/

  Description   Resource    Path    Location    Type
  Asset requires dependency "libQtCore.so.4" to be included in the BAR package.   bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtDeclarative.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtGui.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtNetwork.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtScript.so.4" to be included in the BAR package. bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtSql.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtSvg.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtXml.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Asset requires dependency "libQtXmlPatterns.so.4" to be included in the BAR package.    bar-descriptor.xml  /StampCollector line 82 BlackBerry App Manifest Problem
  Invalid project path: Duplicate path entries found (/StampCollector [Output path]), path: [/StampCollector].    StampCollector      pathentry   Path Entry Problem
  Source file of asset "StampCollector" does not exist.   bar-descriptor.xml  /StampCollector line 70 BlackBerry App Manifest Problem
  Source file of asset "StampCollector" does not exist.   bar-descriptor.xml  /StampCollector line 74 BlackBerry App Manifest Problem
  Source file of asset "StampCollector" does not exist.   bar-descriptor.xml  /StampCollector line 78 BlackBerry App Manifest Problem
  

  Best regards

  The sample will deploy and run with these warnings.

  (I made a new download and build.)  I don't see the warnings, but I can deploy and run the application)

• Problem running the sample Application after installation patch set 4.0.2.00.07

  We just applied the fix 4.0.2.00.07 on our environment to TEST APEX4.0.
  Now, I can not run the sample application. "When I run the application, log in using either the administrator or the user of demo with the #lower_case_workspace_name #", the browser generates the following error message:
  
  ORA-06550: line 2, column 8: PLS-00201: identifier 'CUSTOM_AUTH' must be declared ORA-06550: line 2, column 1: PL/SQL: statement ignored
  ERR-10460 error cannot perform the function of verification of the authentication credentials.
  
  The sample application works very well on our DEV APEX 4.0.0.00.46 environment * without * the patch set 4.0.2.00.07.
  
  Does anyone have an idea how to solve this problem
  Thank you

  Hello

  Ensure that the CUSTOM_AUTH & CUSTOM_HASH functions exist in the scheme of the analysis of the sample application.

  CITY

• Some problems with the construction of project in Eclipse

  I use js + css3, html5 in my project for smartphone.

  And I have problem (error) with a construction project.

  ---------

  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [ERROR] Feature is not found in any extension (blackberry.bbm.platform)
  BUILD CAME OUT WITH 1 ERROR

  ---------

  What should I do to fix this error?

  Thank you!

  Thank you!

  I accidentally duplicated the subject, and the problem was solved in http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Some-problem-with-building-proje...

• Problem during the execution of project

  I started to build a site in flash catalyst and things went smoothly.  I would like to launch the project and everything would display correctly in Safari (Mac User).  However, I was working on adding a scroll bar, scroll pane, and had reproduced a State and somewhere, there, I have created a problem.  When I click on run the project, I get the build status bar and safari opens, but the only thing that plays is a flash of a small black rectangle in the middle of the browser.  It appears as nothing else intends when loading.  I tried to cancel some of the things I've done leading up to the problem but can't seem to get the project to run.

  Is there any kind of error log, or any indicator that I can use to fix this?  If someone else has experienced something similar.

  Thank you

  Ryan

  Hi Ryan,

  You can find good instructions on the creation of a panel of scrolling here: http://forums.adobe.com/message/2295900#2295900.  Let us know what questions you have, if you're still confused after reading this presentation.

  We also took a glance at your broken FXP file.  The problem seems to be that, at some point, you cut & pasted the part "Scrolling content" a panel of scrolling, penetrating inside the Panel on your main application element.  In beta 2 of catalyst, this causes your application off until you remove the object of wandering scrolling content.  This problem has been fixed since then, but I'm sorry that you encounter in the meantime!

  -Peter

• Problem between the navigation pane/project pane

  I imported a 20 minute video in the browser. When I insert the video in the project pane to get one - only - frame size postage stamp. Cannot stretch yellow handles right-left to sink into a film strip several dimensions. Cannot edit the video in its current form.

  

  You can stretch the timeline by moving the slider (at the top right on the part of the project, to the left of 'Settings') to the right:

  

  Geoff.

• problem with the movie maker project

  I need assistance with windows movie maker. When I try to import images into the project, I get the message that it won't work brcause I need a responsible low codec. What is the will

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Codecs: Frequently asked questions

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• HR 2015 - failed to open the file of project RH - RH crashes

  I have a client who has problems with the RoboHelp 2015 project file. It seems that something has been corrupted.  I received the project files and the same thing happened on my laptop. Are there files I can delete which would help resolve this situation? Something like this happened to me a long time ago and I thought that I was able to remove one of the files and RoboHelp rebuilt the file when I reopened it. For the life of me I don't remember what it was. Here are the steps that I can reproduce again and again:

  1. launch RoboHelp

  2. click on file > open project

  3. navigate to the location of the project file
  4. Select HTML RoboHelp project file

  5 RoboHelp begins to open the file. The cursor will move in one loading, appear as it tries to load the files. But does nothing. Client left running for hours but nothing changes.

  

  6 then he appeared

  

  This thread offers to delete the file rhfontset.apj - HR must re-create the file when you open the project. It will be in the same folder as the cpd and xpj files.

  Errors when opening a HR project.

  Maybe rename it initially to see if it helps - if you have sets of police custom, you may have to re-create.

• Problems of synchronization of the sample clock with a frequency of a PXI-6229 counter!

  Hi all, I'm having some problems with the synchronization of a frequency meter connected to a liquid flow meter (sensor only have 1 open collector output) with the sample of a PXI-6229 map clock. Someone there willing to give me a little help here would be appreciated?

  The problem is that the reading of the meter in the whole loop blocks until the time-out period.

  

  Suggestions for an alternative approach would be too good...

  Source code attached.

  BR,

  / Roger

  It sorted another way!

  

• I am new to Muse, so I am following the tutorial for coffee of Katie.  I downloaded the sample files.  The problem is not that all the files in the folder as in the tutorial.  The color swatch for example is not there.  The updated CC on the road Katies.m

  I am new to Muse, so I am following the tutorial for coffee of Katie.  I downloaded the sample files.  The problem is not that all the files in the folder as in the tutorial.  The color swatch for example is not there.  The CC file to get started Katies.mulib is also not if you can't automatically download all the necessary files.  Can anyone help?

  found in another area

  Where can I find updated cc enroute Katies.mulib file?

• Problem with the audio sampling during export

  I'm having a problem with my audio sampling rate. For some reason, it is set at 8 khz by default when I export. It wasn't a problem until the last update (2 weeks ago). I'll try and give all the info I can to the front. I also tried customer support... which was a nightmare.

  OK, the question that I address is that when exporting audio sampling rate is 8 kHz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to the h.264 format, he insists on the reset to 8 kHz. Even if I manually set all look rendering queue and click on output module again once it back the sampling frequency to 8 khz automatically of changes that I need to set it again. Why can it not only be fixed to 48000 like all other adobe products is and as it was two weeks ago. Does anyone have an answer?

  This problem is resolved by update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• JSF tutorial, EJB, JPA, the sample of the problems with the ADF runtime

  Hello
  
  I'm new to jDeveloper.
  I downloaded the version 11.1.1.2.0 and tried to make my first tutorials with the product.
  I started with the sample "create Applications with EJB, JPA and JSF" and run to the following problems:
  
  -1st part: step 10 expose the EJb as a data control
  Click here FODFacadeBean.java and choose Create a Data control.
  This option "create data Control ' is not at all to the top. There is no option
  
  -Part 2: Step 1 Add tag libraries in a project
  The ability to select "the ADF Faces Components 11'
  does not come either. I can't see any ADF Associates options...
  
  Is there something missing in my installation, because I can't access these components of the ADF?
  Should I include the components of the ADF sometime during the installation to have access to these
  or is it a license option?
  
  I downloaded the product yesterday from the public site, filename jdevstudio11112install.exe
  
  Jan-Erik

  Go to tool-> preferences-> roles
  and pass the default role, then you should have all the ADF their stuff available.

• Problems with the bar code reader sample

  I want to integrate barcode scanner in my application, but it seems to be a lot more complicated than I thought.

  I use the example of BarcodeReader, and when I integrate his code 1:1 it works correctly.

  As soon as I try to change, however, is not.

  I want to:

  -use without a cover and an animation

  -have everything in a sheet with a close instead of a page button

  When I place "camera.open ()" in onCreationCompleted, for example, the camera is displayed as you wish, but the bar code scanner does nothing.

  I also tried to launch the camera delayed (of 200 or 400 MS) using QTimer::singleShot in c ++, the camera opens but still no scanning codes bar.

  A comment in the code example shows "Temporarily work around a bug", no idea if this could be related?

  This class is very buggy. You need to do initialization twice, the other after a delay of ~ 200 ms after the first. This makes the sample.

  I was able to make it work with the one-time initialization by defining the camera right after the creation of barcode detector:

  camera_ = new Camera();
  barcodeDetector_ = new BarcodeDetector(this);
  barcodeDetector_->setCamera(camera_);
  

  But if I change all the properties of the camera (such as the size of the viewfinder) during initialization or in viewfinderStarted() Manager of signal, it stops working and initialization of the double notch should be used to do work.