Hi Sir Gud morning

Similar Questions

• G4 black screen after RESUME sleep book Pavilion

  Gud morning,

  IM using Pavilion g4-2007tx and my graphics card is AMD Radeon HD 7670 M (2 GB memory DDR3 dedicated) and graphics driver version is 8.933.3.3000. last 2 weeks, I went to the site to download driver hp to see if if there any update driver my laptop en... And yes I have gt a updated driver for my graphics card and the driver version is 8.933.3.4000 and this link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=my&dlc=en&lc=en... After I download and update, it successfully but when I put in mode 'sleep' and when I on my laptop, the screen is all black when I install the driver previos version is not the problem of sleep... I hope that technician Hp would have a solution for me... Thank you

  Michael,

  After the update, go to power and all set options by default.

  The update can change a parameter with power options.

  Do a hard reset.
  Turn off the computer.
  Remove the power cable and battery.
  Hold down the power button for 15 sec while booth energy sources are deleted.

  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

• Need help: Summary Prepared does not exeucting

  Hi refugees,

  Gud morning...

  I'm new to OFA...

  I am facing problem that the prepared statement is not executed in JDev... but it runs into a toad...

  I have LabelFiedLayOut region...

  In the i have four objects from view based on an entity. and control...

  First of all, I will carry out the object view and based on the view attribute value, I guess to get the value of the checkpoint...

  Even it is not conclude the while loop...

  But toad is return values

  Here's the code...

  ' Public Sub updateItemIniti (pageContext OAPageContext, OAWebBean webBean)

  {

  String updateItemId = pageContext.getParameter ("updateItemId");

  String updateCategoryId = pageContext.getParameter ("updateCategoryId");

  System.out.println ("category id strt:" + updateCategoryId);

  Vo1 OAViewObject = getnhItemsVO1();

  VO1.setWhereClause (null);

  VO1.setWhereClauseParams (null);

  VO1.setMaxFetchSize (-1);

  VO1.setWhereClause ("INVENTORY_ITEM_ID =" + updateItemId);

  VO1. ExecuteQuery();

  String category = null;

  Try

  {

  Tran OADBTransaction = getOADBTransaction();

  Connection pconn = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String lineseqquery = "select FLEX_VALUE_MEANING as flex from fnd_flex_values_vl where 1 = 1 and flex_value =: 1 and flex_value_set_id in (select flex_value_set_id from fnd_flex_value_sets, including 1 = 1 and flex_value_set_name = 'XXNH_CAPEX_HIERARCHY');

  String lineseqquery = "select count (*) as cnt from XXNH. NH_MTL_SYSTEM_ITEMS_B@UAT8015 where 1 = 1 and stuff =: 1 and item_name_desc =: 2 ";

  PreparedStatement stmt = pconn.prepareStatement (lineseqquery);

  System.out.println ("category id strt:" + updateCategoryId);

  stmt.setString(1,updateCategoryId);

  System.out.println ("after assigning cat id");

  ResultSet rs1 = stmt.executeQuery ();

  System.out.println ("result set after executing the query ::");

  While (RS1. Next())

  {

  System.out.println ("starting run query");

  category = rs1.getString (1);

  System.out.println ("category in loop:" + category);

  }

  OAMessageLovInputBean cat = (OAMessageLovInputBean) webBean.findChildRecursive ("ctrlCategoryName");

  cat.setValue (pageContext, category);

  System.out.println ("category name:" + category);

  }

  catch (System.Exception e)

  {

  throw new OAException ("error in initialization", OAException.ERROR);

  }

  Please... help me...

  Thank you and best regards,

  Jaya

  Hello

  Visit this link:

  Technology blog based in Java of Sushant: 12. The OAF Page PL/SQL function call

  Sushant-

• Need help: parameter dynamic button prompt:

  Hi refugees,

  Gud morning...

  as I am new to OFA, am not able to solve this problem...

  I'm going to region table with 2 columns...

  in column 1, that I displays the list as assignment details, details rank, item details... etc.

  and second columns shows the buttons with the speedy right arrows(>>)... If ever, we click on the button, display the corrosponding region and execution of VO...

  For the list, will have to run the original Version, because the list is dynamic...

  But my real requirement is, should show only the buttons with the label names... maybe by the VO...

  How can I do...?

  Please... give your valuable suggestions...

  Thank you and best regards,

  Jaya

  Visit this link:

  https://forums.Oracle.com/message/3729432

  Sushant-

• Need help: error creating record

  Hi refugees,

  Gud morning...

  I get this error during the creation of the new record twice (for the first record, it works fine...)

  As master details page, I am Manager differently which... first of all I save the details of masters and while saving the level of detail, I will assingn the id of the header to the attribute display... when I create the first new record and save it works fine... but when I try to create a record more it shows error... This is the code... AMImpl

  It is showing the error in the createRecord() method only... it runs until the row.setNewRowState (Row.STATUS_INITIALIZED) after that only it is throwing error (assigning values for the attributes of display...) But for the first record it works fine...

  Please... give your valuable suggestions...

  ' Public Sub createRecord (pageContext OAPageContext, OAWebBean webBean)

  {

  saveMasterDtls (pageContext, webBean);

  String vunitid = pageContext.getParameter ("ctrlUnitId");

  String vapproval_id = pageContext.getParameter ("ctrlApprovalId");

  OAViewObject vo = getcapexApprovalHierarchyVO1();

  Try

  {

  String ctrl_headerId = null;

  Conn connection = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String query = "select header_id OF XXNH_CAPEX_APPROVALS where unit_id =: 1 and APPROVAL_id =: 2;

  PreparedStatement stmt = conn.prepareStatement (query);

  stmt = conn.prepareStatement (query);

  stmt.setString(1,vunitid);

  stmt.setString(2,vapproval_id);

  ResultSet rs = stmt.executeQuery ();

  RS = stmt.executeQuery ();

  While (RS. Next())

  {

  ctrl_headerId = rs.getString (1);

  System.out.println ("id of the header in all new record:" + ctrl_headerId);

  }

  If (! vo.isPreparedForExecution ())

  {

  searchRecords (pageContext, webBean);

  }

  Line line (Row) = vo.createRow ();

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  System.out.println ("before assigning values id...");

  vo.getCurrentRow () .setAttribute ("HeaderId", ctrl_headerId);

  vo.getCurrentRow () .setAttribute ("UserUnitId", vunitid);

  }

  catch (System.Exception e)

  {

  throw new OAException ("error creating record:" + OAException.ERROR, e);

  }

  }

  =======================

  ' Public Sub saveMasterDtls (pageContext OAPageContext, OAWebBean webBean)

  {

  / * checking already Masters details existed or not for unity & approval * /.

  System.out.println ("master dtls start");

  String v_unitid = pageContext.getParameter ("ctrlUnitId");

  String v_unitName = pageContext.getParameter ("ctrlUnitName");

  String v_approval_name = pageContext.getParameter ("ctrlApprovalName");

  String v_approval_id = pageContext.getParameter ("ctrlApprovalId");

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  int cnt = 0;

  Try

  {

  Connection pconn = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String pquery = "select count (*) FROM XXNH_CAPEX_APPROVALS where unit_id =: 1 and APPROVAL_id =: 2;

  PreparedStatement stmt = pconn.prepareStatement (pquery);

  stmt.setString(1,v_unitid);

  stmt.setString(2,v_approval_id);

  ResultSet rs = stmt.executeQuery ();

  While (RS. Next())

  {

  CNT = rs.getInt (1);

  }

  System.out.println ("count is:" + cnt);

  If (cnt == 0)

  {

  System.out.println ("If condition start");

  Tran OADBTransaction = getOADBTransaction();

  Number v_header_id;

  v_header_id = am.getSequenceValue ("XXNH_CAPEX_APPROVAL_SEQ");

  capexApprovalVOImpl vo = getcapexApprovalVO1();

  If (!) VO.isPreparedForExecution ())

  {

  vo.executeQuery ();

  }

  Line = vo.createRow ();

  row.setNewRowState (rank. STATUS_INITIALIZED);

  row.setAttribute ("UnitId", v_unitid);

  row.setAttribute ("UnitName", v_unitName);

  row.setAttribute ("ApprovalName", v_approval_name);

  row.setAttribute ("ApprovalId", v_approval_id);

  row.setAttribute ("HeaderId", v_header_id);

  vo.insertRow (row);

  getTransaction () .commit ();

  System.out.println ("unless condition end");

  }

  on the other

  {

  capexApprovalVOImpl vo = getcapexApprovalVO1();

  vo.executeEmptyRowSet ();

  }

  }

  catch (System.Exception e)

  {

  throw new OAException ("error in recording: master Dtls prepare Stmt query:" + OAException.ERROR, e);

  }

  }

  ============================================

  ' Public Sub searchRecords (pageContext OAPageContext, OAWebBean webBean)

  {

  String v_unitid = pageContext.getParameter ("ctrlUnitId");

  String v_approval_id = pageContext.getParameter ("ctrlApprovalId");

  OAViewObject vo = getcapexApprovalHierarchyVO1();

  vo.setMaxFetchSize(-1);

  vo.setWhereClause (null);

  vo.setWhereClauseParams (null);

  int v_header_id = 0;

  Try

  {

  Connection pconn = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String query = "select header_id from xxnh_capex_approvals, including 1 = 1 and = unit_id: 1 and APPROVAL_ID =: 2;

  PreparedStatement stmt = pconn.prepareStatement (query);

  stmt.setString(1,v_unitid);

  stmt.setString(2,v_approval_id);

  ResultSet rs = stmt.executeQuery ();

  While (RS. Next())

  {

  v_header_id = rs.getInt (1);

  vo.setWhereClause ("HEADER_ID =" + v_header_id);

  }

  vo.executeQuery ();

  }

  catch (System.Exception e)

  {

  throw new OAException ("error in query records...") Prepare the query Stmt: "+ OAException.ERROR, e);

  }

  }

  ============================================================

  Best regards and thanks,

  Jaya...

  Jaya,

  could you please check if the Id of the header is marked as primary key in database level or the level of the view object.

  Concerning

  GYAN

• Need help: the Get method call / EOImpl

  Hi refugees,

  Gud morning question,.

  I have two classes of EOImpl,

  As I am new to OFA, I am facing problem while

  calls the method to accessor Get EOImpl one in the other accessor method Set EOImpl...

  Can we call that?

  Requirement: I have two EO with the column Header_Id

  I have to give the same value in both columns

  In the first EOImpl class, I used the sequence in the Set accessor method.

  Now, I have to call the accessor method Get EOImpl first in the second accessor method Set EOImpl...

  Please give your valuable suggestions...

  Thank you

  Jaya

  Hello

  You can set the value of EO header_id 2nd in your AMImpl.

  While creating the line for the 2nd VO, get the value of header_id 1 VO and the use of the row.setHeaderId () value before VO.insertRow.

  Sushant-

• Suddenly SIRI is not listening

  Installed version master Sierra gold several days ago. SIRI works very well. Not this morning. Citing SIRI brings dialog SIRI, but activity remains perfectly straight when I talk. Sound is set to the internal mic and the pref panel hears me. Have you tried to restart the Mac, disabling SIRI then on of pref.; no love. Any suggestions as what to following are welcome.

  Install the final version. There will be 2 issued GMs. Maybe your current No.

• After that iOS 10 Upgrade, Siri can send text messages.

  I have an iPhone 6.  I have upgraded to iOS 10 (10.0.1) this morning.  Everything seems to work very well with the exception of Siri is unable to send text messages.  It was working fine before the upgrade.

  'Hey Siri' addresses.  I say to "send a message to Patti mobile xxxx."  Siri says and asks what I want to say.  I said the message.  It saves the message as usual and asks me if I want to send it.  I say 'yes '.  He says "your message has been sent.

  Then, I get an error message saying that the message could not send.  The message is then listed with a recipient of: _ $! < mobile >! $_ the message below is "Message send Failure."

  Any thoughts?  Thanks for your time.

  10 iOS update resets some parameters according to me.  It worked for me to go to Options - LTE data - cell - cell settings enable and toggle either 'Off' or 'Data Only'.  Texting non-Apple do not seem to work if "Voice & Data" is selected.

• Siri empties my iPhone battery

  I have an iPhone 4S iOS9.3.2 running.   A few days ago I was prowling all about play a podcast for my Bluetooth headset.   As I went to another podcast, I noticed that my iPhone was strangely hot.   I looked at the battery and it was down to 50%.  This NEVER happens.   So I plugged and did a few other things.   I also asked Siri what was wrong.   Siri wouldn't.  (I should point out that I use NEVER Siri.)  I did a number of other things and then I plugged the iPhone on iTunes and it said that I needed to update the system.  I put it to download the new software.   After awhile, I got home and he said that he had no download.   Then I hit the upgrade, and he said I had the latest system.    So, I went through all the preferences and disable all the things of the location and background things.   And then I went found that 55% of the battery has been spent on Siri.   So I turned off Siri (which I never use anyway) and turned off the voice of Siri thing.  I was this morning with the fully charged phone, I took a shower and it decreased by 20%.   I loaded again and set it to low power, put it on a table and after 2 hours, only 3% had disappeared.  Still a little later today, I reached over and it's hot.   I use the phone less, and now Siri uses 75% of my phone's battery.

  Now here's another funny thing.   Several months ago the President of my phone stopped working for many applications - such as podcasts.  He worked for the phone calls and orders of speaker phone, etc.  After I did all of these alterations and removed a couple of GB of audio files, suddenly my speaker work again for the podcasts and NPR etc.

  And Yes, I've done a few reboots and I guess the only thing left is white out with restore iPhone and then restore the backup.

  I checked around and found many discussions about being unable to extinguish Siri.   Furthermore, under the name of Siri, it says "weak signal".   Why should that from now on when I am almost always in a WiFi zone that is very strong and I turned off most all access to the data.

  Then why not remove Siri?

  Hello Karl Clyde.

  Thanks for this info and choosing the communities Support from Apple. I know how important having your iPhone and Siri works correctly for you!

  According to what you said and the good troubleshooting steps you have already tried, your next step is to back up and restore your iPhone in iTunes, to narrow down if it's a hardware or software problem. Please follow these steps.

  The backup of your iPhone, iPad and iPod touch

  Import photos and videos from your iPhone, iPad or iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  See you soon!

• Siri includes my order, but then the dials fake name.

  I have always made good use of the Siri, especially when it comes to using siri to dial names.

  Last week, I noticed that Siri has done something really weird when I use 'his' to call a contact.  This morning I "asked" Siri "Call Jackson Werner Mobile".  Siri understands what I say, and the iPhone screen shows a bubble at the top of the screen that contains the text "Call Jackson Werner Mobile".  Siri then prints another window of bubble under the high bubble of the page that says: 'Call Deanne Werner Mobile'.  Jackson is my son and Deanne is my wife.  Jackson and Deanne are in my favorites, and I call them both regularly.

  Earlier, I tried to call my brother, Ed.  Still, Siri understands what I say at the beginning, showing, 'Call Ed Werner Mobile' on the screen before translating to 'Call Deanne Werner Mobile' and my wife calling again.

  Sometimes the Siri even answer my sense, "Call Jackson Werner" by saying, "I don't understand Jackson Werner.  Did you, call Deanne Werner? "I say, 'no '. and Siri says: "who do you call?  And that would put me in a loop of ridicule in which I say, 'Jackson Werner', and Siri responds "I don't understand Jackson Werner.  Who would you call. "Very frustrating.

  Why does Siri understands what I say at the beginning, but then translates into what I say into something else?  Can I fix thi?

  I would try to ask him to repronounce the name and if it was after the recent updates, go to its settings and make sure that the language is correct.

• Why my alarm stop my iPhone 6s every morning?

  For the last two weeks, I've been waking up in front of a closed iPhone. I do a rough start so he can go back on. Fortunately, my boyfriend alarm was arousing me. It took until this morning, when I woke up before my alarm and reset at 09:00 instead of 08:00, that I shook are waking up to the sound of silence and found my iphone off. That's when I realized my alarm is turned on but not jump since this all started. My software is up to date. We tried turning off of siri, a difficult start and a reset. The only thing we haven't tried is a factory setting reset and reinstalling my most recent upward. I currently have a song on the applemusic selected as my sound app alrm.

  Thanks for the help,

  J

  Try using a built in alarm. With the help of songs proved to be problematic for some people. If this doesn't solve your problem, the next step would be to restore back to the top, then, if that was not able to restore as new.

• Voice control that is not enabled when Siri is disabled.

  I bought a new 6 s more a couple of days. Voice command does not work.

  Permit of Siri, which worked well. On off Siri, voice command should get activated. But it's not.

  Support agent by CAT invited to try to restart the phone. Who has not solved the problem.

  Then she asked to reset all the settings. Tried but I had to spend time in new establishing ID touch again and a few other customizations. Who did the trick. But later I changed around some parameters based on my preference... As the parameters of vibration, background app, n assistive touch refresh. I tried Siri. Worked well. Then disabled Siri. And bang... Voice command does not work yet.

  Support called this morning. They were asked to try recovery restore.

  I decided not to go ahead with the recovery as it would mean downloading all the apps odd 70 I have reset Touch ID and customize all the settings again. A lot of your time. I guess I'll just wait for the next update if there is a difficulty.

  Meanwhile, I just noticed that the international option under general settings is missing. The guide of the said user voice control language can be changed there. But the international option itself is missing. I used the option to return on the Web site to connect it as a bug.

  Any ideas or pointers? Pls help.

  I have the same problem with an iPhone 5 c.  He raised ugly head is when the phone has been improved IOS 8.xx 9.2 a few weeks ago. Similar problems have been reported with the introduction of iOS 9 last September, mostly in conjunction with bluetooth function.

  Like you, I use my iPhone to do the voice to make calls without Siri. I use a Motorola T225 handsfree speaker. The iPhone and the pair speaker and désapparier correctly. With Siri on, by pressing the call button on the speakerphone, voice dial beep of the iPhone to request a command. Issue a 'Call' name, translates a Siri as voice repeats "Calling" name and so on.

  Siri only works when connected to the internet via wi - fi or your cellular data subscription. As you pointed out, without either, Siri does not work and must be shut down before you can make a voice call.

  Since iOS 9.2, the iPhone does not respond to the call key bluetooth with voice dialing tone when Siri is off and does not take into account the "Call" command This means that for anyone without a cellular data plan (or outside of cellular range), you are no longer able to make hands-free calls. Apple is to recognize that this is a major problem and could lead to dangerous use of their device.

  You have tried many of the suggested corrective action. Reset the network settings, reset all settings, the restorations of iOS and temporarily replace the language setting (it is not clear if the done language reference is the language of the iPhone or Siri, who find themselves in different options under general settings). As you have pointed out the international option went into hiding. Every iOS update results in a large number of settings being changed with a large part of the documentation that was created at the time of your iPhone has manufactured and distributed on the internet, is no longer valid.

  I, like you, reluctant to "destroy" a large part of my installs customization and app phones, a temporary solution. Thank you for pointing out that you had done the reset, only to get her back. It seems to me that the iOS Update 9 corrupts a framework. The setting is fixed by doing a reset but once again altered when you turn on a setting or a specific function. This suggests that you can perform recoveries as Apple support says, until the cows come home home.

• How to open applications via Siri?

  I have an iPhone 7. When I do ' Hey siri "and ask to open an app, I always first unlock my phone. Is there a setting to work around this problem?

  Thank you

  Brett

  Tap Settings > Touch ID & password then enter your PIN and then slide down and switch on Siri.

• How can I tell Siri on Mac who I am

  When you use Siri on my Mac, he thinks I'm my partner. How can I change the contact information so if Siri knows who I am?

  You must select the card that you want your card and use it card ➙ do this sheet my sheet menu option:

  

  Siri will use this card.

  

• SIRI A PRIVACY RISK?

  We learned earlier this year that Toshiba had probably a fault his ' voice command TV that once activated not only listening microphone orders presented, but in fact could and transmitting sounds, voices, conversations for Toshiba...   I have Siri also a security risk?  Just curious, because we lost so much freedom of privacy already of course, we do not want to add to that, gladly... and of course was not interested in inviting Big Brother into our home...

  Any ideas?  Thoughts?

  If you are paranoid on the subject, then turn off Siri.