Hidden fields are visible in the new instance of the subform.

Similar Questions

• All hidden files are visible after the command help

  Hello
  When I removed all my files were hidden 'newfolder.exe' virus and I have should use a command in cmd to display them.
  After each use attrib command ([driveletter]:------attrib - r - a-s - h) my files are back but all files hidden, including the file system and the album art and etc are too visible

  How can I solve this problem?

  Thank you

  Hello

  Windows has the ability to hide all system files, it's looking at the properties of each file to see if the checkbox 'hidden' or 'system' is defined.

  The command you used all the flags hidden / system removed from all files on your entire hard drive. There is no way to undo what you have (except the System Restore, if necessary). The reverse of the order hiding everything, including your files.

  The preferred method to hide or display files is to go to Folder Options and together to "hide system files and hidden", but this will not help now, because you corrupted the data he uses by running this command.

  If the system restore will not roll back to before running this command, you will need to manually enter each file and re - configure these options.

  Shawn B Keene [MVP]wire detail reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-can-i-hide-my-system-files-again/f5bfa796-0d5a-E011-8dfc-68b599b31bf5

  I hope this helps.

• I added LR6 to a new PC and flies over the catalog of my old PC. Now, the main window in the modual development is blue. The photos are visible in the modual library. Why?

  I added LR6 to a new PC and flies over the catalog of my old PC. Now, the main window in the modual development is blue. The photos are visible in the modual library. Why?

  Clear the option use the GPU in the performance preferences tab.

• Hidden fields fields visible to move down when hidden fields become visible?

  Hello

  I have a form that I have a couple of hidden fields on. If the things in the user list a specific choice in a drop-down list, the fields become visible. The question I have is how to ensure that when the fields are invisible visible fields are close together and then when a selection is made to one or more of the visible invisible fields the rest of the fields below it move down to make of the place?

  It's like this:

  field 1

  [space hidden field]

  field 2

  [space hidden field]

  area 3

  That's how I like it on the cloth:

  field 1

  field 2

  area 3

  And if a selection is made of field 1:

  field 1

  [visible hidden field because of the selection in the field 1]

  field moved down 2 make room for visible hidden field of selection field 1

  area 3 moved down to make room for visible hidden selection field 1 field

  Thanks in advance for any help!

  Hello

  The second option in the example in this post: Re: how to replace elements of the menu drop-down list view script to make it work.

  Please note that objects must be in a FLOWED subform and the form should be saved as DYNAMIC.

  Good luck

  Niall

• All fields are empty when the button is clicked

  Hello

  I have the result and 2 window search criteria. all the fields in the search window are not visible when the user enters some search criteria and click on the button Search opens the window of results, the opening of the result window, I want to say is not no button text box are visible in the search window, the window is empty. Please can someone tell what is wrong, what I have to change any property of window or controls.

  Thank you

  Vish

  Hello

  Oh no problem, you must use 1 table of main content & display the search result in the stacked with the next consideration...

  Please note on canvases stacked that you have the following properties of the view-port, which explain the key solution do not display the form elements in your case.

  1- T it position from view of the piled in canvas (Viewport) on the table of contents of the current window. (Display X, Y Position window)

  a.Viewport X, position Y on the window:

  Specifies the coordinates x, y to the left corner of the canvas stack relative to the top left of the display of the contents of the current window.

  -This means that the position of the top left of your canvas stacked on top of the canvas content.

  b.Viewport WIDTH, HEIGHT

  Specifies the width and height of the display for a stacked canvas.

  -This means that the actual size and the position of the view that defines the part of the drawing area is displayed in the window running.

  2- T it position from view of the piled in canvas (Viewport) on stacked canvas itself. (Display X, Y Position on canvas window)

  Viewport X, position Y on canvas

  Specifies the location of the top left corner of the view from the upper left corner of the canvas. The size and location of the window define the view; in other words, the part of the canvas which is currently visible in the window which is attributed the canvas.

  This parameter specifies what part of your willingness to stacked canvas the viewport (visibility) will cover.

  These properties help you make your most visible form elements on your canvas without using the scroll bar.

  You should try for yourself & recognize more clearly.

  Amatu Allah

• Synchronized adjustments of photo is NOT visible in the display of the grid, except if the photos are visible on the monitor?

  I find this behavior strange and annoying. Maybe that I've failed to set a correct preference or something, I'm looking for help. Let me explain in detail.

  OK, so I downloaded 900 RAW photos in LR that I am about to use for a period of time. I import them with the "auto tone" setting is applied.  Then, I take the first photo, make adjustments to it, select all the other photos and 'click' sync. I'm in the library grid view Module.  These photos which are visible on my monitor begin to appear the changes that have been applied to the first picture. However, after all the photos that are visible in the grid view show the changes I've made scroll down to see some of the other photos that were NOT visible.  Then, I find that these previously unseen photos have not been changed, but they immediately begin to change as soon as I scroll and they become visible.

  Why LR care I look?  He must know I have synced all and I want that they changed as soon as possible. I don't want to have to keep scrolling to get altered.

  I use a PC with the latest LRCC, Windows 10. But I "ve seen the same behavior on the old Mac too.

  I'm sure this is a normal behavior. If you make changes to a large number of image files (i.e. synchronization is possible with 900 images) previews are not automatically updated. This allows you to continue working on the other images without taking a performance while LR is based previews. The best advice I can give you is to select all the images that have just been published and in the library module, use the menu library > previews > build previews Standard (or 1:1 previews). It will take a while to update 900 previews and inside LR will be slowed until the completion. This gives you the ability to choose when it's convenient rebuild previews.

• NDP project - field of visibility of the project

  Hello
  
  I would like to know what is the function of the field of visibility of the project in the summary on a project tab.
  
  Thank you and best regards.
  
  Stefano

  You can use the visibility to categorize your projects, thinking it's tags or classifications. It can be used when searching for projects. It can also be used as a filter in the portfolios of projects.

  For example, if you have any projects around a particular type of product as frozen Snacks, you can use this as a visibility. This visibility will allow you to find all projects concerning Frozen Snacks etc.

  It's a field of multiple selection on the project so it allows a lot of flexibility. You might have visibilities around initiatives and product types. For example, to find all the projects of "Frozen Snack' related to 'GMOS Reduction' initiative.

• My iPhone and iPad are not visible to my Macbook Pro in parachuting, but they are visible to the other... How can I solve this problem?

  How can I fix?  iPhone and iPad are visible to each other in parachute drop but they does not see my Macbook Pro.

  Greetings brsm1990,

  Thank you for using communities Support from Apple!

  I understand that your iOS devices can see each other with the help of parachuting, but your Mac does not see them. To begin troubleshooting, I suggest you read the information in the following article.

  Use AirDrop to send the contents of your Mac - Apple Support

  Tips for sending items

  If you do not see the recipient in the AirDrop window or sheet:

  • Make sure that the two devices have on AirDrop and are less than 30 feet (9 meters) on the other.
  • If you send to an iPhone, iPad or iPod touch:
    • Your Mac must be a 2012 model or newer with OS X Yosemite or later.
    • The iOS device must use iOS 7 or later and have Personal Hotspot disabled in settings > cellular.
  • If you send a Mac:
    • If the receiver Mac uses OS X Mavericks, Cougar or Lion, then open a window AirDrop: choose go > AirDrop in the menu in the Finder bar.
    • If the receiver Mac is a 2012 model or, click "Don't see you looking?" in the drop window or the sharing of the sending of the Mac spreadsheet. Then click on "Search for an older Mac."
    • Know if the Mac has "block all incoming connections" enabled in the security and privacy preferences. A Mac does not receive items using AirDrop if this setting is enabled.
  • If AirDrop on the receiving device is set up to receive points of contacts only, make sure that the two devices are connected to iCloud. Also make sure the associated e-mail address or phone number to your identifier Apple is in the Contacts application on the receiving device.

  

  Release system requirements

  Send items to an iPhone, iPad or iPod touch, or to receive these devices, you need a 2012 model or later Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

  To send items to another Mac, you must:

  • MacBook Pro (Late 2008) or later, excluding the MacBook Pro (17 inch, late 2008)
  • MacBook Air (late 2010) or later version
  • MacBook (Late 2008) or later, excluding the white MacBook (Late 2008)
  • iMac (early 2009) or later version
  • Mac Mini (mid-2010) or later version
  • Mac Pro (early 2009 with AirPort Extreme card or mid-2010)

  Learn how to identify your model of MacBook, MacBook Pro, MacBook Air, iMac, Mac minior Mac Pro.

  I know you said that your Mac does not see your iOS devices, but your iOS devices sees the Mac?

  Best!

• BlackBerry Q10 Q10 - How di I select which e-mail accounts are visible in the "Hub".

  I'm slowly getting used for the "news" of Q10 (I still think as most of them as bugs) and find how it works around them, I'm stuck on the hub.

  It seems to me that a good way to deal with this constant problem of what is shown/saved/reviewed etc would be to set up multiple e-mail accounts (still don't understand why a postal address dictates how messages are handled, but that's another topic)

  The problem I am facing in, is that I can not understand how to change the settings of the hub to choose which e-mail addresses are indicated in the hub, and which ones I have go to separately (ir not shown in the hub)

  Actually, what I did is set up multiple addresses such as [email protected], [email protected], [email protected], etc, and I just want to see abc1 and housed in the hub abc3... you get the idea.

  Thanks in advance for your help.

  It is possible to define which accounts appear in the hub.

  Go to the hub and press the 3 points in the lower right. And then tap Settings. Then choose the Management Hub. Enable/disable accounts that you want to make visible/invisible.

• How can I validate a field of visibility of the control to a second field?

  I have two text fields

  Text field #1: an empty field where the user enters the text

  Text field #2. a read-only field that is to become visible and display a message (via its default value) If a user has entered text in the #1 field

  The validation script that I wrote has syntax error that I can't solve. Can someone take a look and see, 1 am I on the right track and 2. If so, what is wrong in this script?

  Thanks in advance for any ideas on that.

  if(Event.value == '')

  {lbl_coupon request appliesFld.display = display.hidden standard}

  }

  else {}

  request lbl_coupon standard appliesFld.display = display.visible

  }

  To access a field, you must use the getField method, as follows:

  If (event.value == "")

  {getField("lbl_coupon_request_standard_appliesFld").display = display.hidden

  }

  else {}

  getField("lbl_coupon_request_standard_appliesFld").display = display.visible

  }

• Unable to connect to the computers that are visible on the network.

  Yesterday the computers on our network available via remote desktop sharing, this morning they are not. Today the computers are all visible on the network, I just can't connect to them or browser all network shares. When I click on one of the computers in a network error dialog "Windows cannot access host" appear with the error code 0 x 80070035.

  My firewall rules are on their default and discovery network settings is enabled.

  Help please.

  Hello Hendre,

  Thanks for posting your query on the Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. I will certainly help you in this matter.

  However, before I would need some information to help you best.

  This computer is on a domain network?

  If Yes, then I would like to inform you that we have a support forum dedicated to systems on area issues. I suggest you to send your query on Microsoft TechNet forum for this issue. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Vulnerability - settings of the browser application are visible to the Post method

  Hello
  
  I am facing problem with parameters that are passed to the submit method. Not sure why parameters are passed to the jsp even after using to introduce the method in form. Here is the code snippet. Hope someone could help me in this regard. Thanks in advance.
  1.
  < name dsp:form = "Save" action = "< % = request.getRequestURI ()" % > " method ="POST" onsubmit =" ">"
  < dsp:input bean = "RegisterFormHandler.createSuccessURL" type = "hidden" value = "notification_message.jsp" / > "
  < dsp:input bean = "RegisterFormHandler.createErrorURL" type = "hidden" value = "register.jsp" / > "
  2.
  < dsp: select type = "text" name = 'Hi' bean = "RegisterFormHandler.value.gtwySalutation" >
  < INPUT size is 32 border = 0 name is "AccountName" >
  
  I need resolution such as settings, such as the slauation and the account name should be passed without display in the browser
  https://gdd.ca.com/commerce/profile/register.jsp?AccountName=admin & saluation = mr.
  
  waiting for answers. Thanks in advance
  
  Kind regards
  Mohammed.

  If you set the method of form as being the only way you get get this URL is when you create the success or error URL with parameters.
  Check the handful of RegisterFormHandler method to ensure that it does not add the parameters in the URL. You can also check the method RegisterFormHandler.getCreateErrorUrl () and createSuccessUrl().

• Hidden field in form with the url of the page value

  Hello world of Dreamweaver,

  Just a quick question im stuck on.

  I have created a simple form name, Email and Message. The problem is I want to use the same form on several different pages, but being able to say what the URL of the form was sent from. I see I want a hidden field in the form, but how could I go all that actually send the URL with the other information?

  Thanks in advance!

  Do better on the server side (ColdFusion, ASP, PHP, etc.).   In ColdFusion, you can use #cgi.script_name # to get the name of the document that contains the form.

  However, you can use JavaScript (not as reliable - esp if the user has JS disabled.)

  Location.href or document. URL will take the path of COMPLETE domain including the name of the document.  Don't forget to access the page via the domain name FULL or http://localhost or http://127.0.0.1.  If access you it via file:\\\C:\path\to\document.htm, so I don't know how this will work.

  ^_^

• Help with Hidden Drop Down lists in the subforms RBList

  I've created a form that contains 3 remote option button lists, each with hidden subforms that are unique in each button.

  Two of my RBLists and subforms work perfectly, showing the hidden options drop down and other fields as they should when a button is selected.

  However, RBList3 has the lists dropdown as user input fields only. Each subform hidden in RBList3 contains a menu drop down and a text box for instructions.

  I used the same javascript to hide/show the hidden fields when buttons are selected. All the settings seem to be upward. Here is a sample of my code:

  If (RBList3.F.rawValue! = 2)
  {
  This.Presence = 'hidden ';
  newsubform. Presence = "hidden";
  }

  another if (RBList3.F.rawValue == 2)
  {
  This.Presence = "visible";
  newsubform. Presence = "hidden";
  }

  Does anyone have suggestions for how make my Drop-Down lists in RBList3 show that lists functional Drop?

  I have attached the reference form.

  Code not woirk for E, F and G. I check if the user selects G if they do not, then they must chose one of two other options (which means that the rest of the logic is executed). If I understand the question is in the initial state of the EdgeDropDown2 objects.

  PanzDrawTxt, and

  EdgePanelChkBxTxt. If you set the initial value of invisible presence, then you will not need to change any code. You must do this for each object individually. Click on one of the objects and on the object palette click the tab field near the bottom of this tab is a drop-down list to set the initial value of presence. Set it to the invisible. Repeat for the other two objects.

  Paul

• Text in overflow Leader - Global field only links in the subform?

  I have a form with a repeatable subform that contains another repeatable subform contained in it. Inside subform has a header row that contains a text field that the user enters data. This header line is configured as a leader of overflow so that it will be repeated when the subform inside breaks to another page.

  The problem is that if I don't put the text field in the header row to Global, it does not preserve the data typed in it and by default, the value default ' Rep ID # However, if I DO not change it to Global, it works for the first subform, but I need my subsequent subforms to have a different Rep ID #, and when the overall value, they are set to the same RepID # as the first subform.

  How to do this? I only need to Rep ID # field for Global binding in the subform in which it is contained, not throughout the entire form. See screenshot below:

  

  Any ideas?

  Thank you

  JO

  Hmmm,

  I was right, it was difficult (or I'm slow).

  https://Acrobat.com/#d=r3jjZgsZQ0O * sqJIsuPfvw

  It comes to FormCalc in the initialize event of the extensible object of rep:

  var i = rep.index
  columnHeader.repID = rep[i].columnHeader[0].repID
  

  Seems to work as expected.

  Niall