Synchronized adjustments of photo is NOT visible in the display of the grid, except if the photos are visible on the monitor?

Similar Questions

• Adobe Premiere 6.5 - Why is my video not appearing in the monitor window

  I have a compressed .avi clip that I imported into my project file in Adobe Premiere 6.5. I did slide the clip on my calendar.  In the clip window, this one appears fine, but for some reason any, it will not appear in the monitor window.

  How can I do to fix this?

  Thank you

  This Xvid CODEC will probably never import and edit properly.

  Go to the source material, before the Xvid compression, or convert to DV - AVI (if SD material) and that importation.

  Take a look at this ARTICLE on AVI (and other formats) as a 'wrapper '.

  Good luck

  Hunt

• Windows 8 will not turn on the monitor

  I recently installed own WIN8. Once installed, the monitor does not start up screen. The only way that the monitor turns on is when I update each time, that gives me a few minutes before the screen turns off again. I tried to repair, automatic repair could not fix the computer

  D:\Windows\System\Logfiles\Srt\SrtTrail.txt log file. The screen stays on during installation or updating, but not when windows has loaded.
  I put the Saver screen and the power for EVER and updates from HP, still do not work.
  All surgestions please.

  Hello

  What media you used to install Windows 8?

  You can BCD to rebuild using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start the Windows recovery environment. To do this, follow these steps:

  (a) put the Windows 8 installation disc in the disc drive, and then start the computer.

  (b) press a key when you are prompted.
  (c) select a language, a time, a currency, a keyboard or an input method, and then click Next.
  (d) click on repair your computer.
  (e) click on the operating system you want to repair, and then click
  Next.
  (f) in the System Recovery Options dialog box, click command prompt.
  (g) type Bootrec.exe, and then press on ENTER.
  (h) Type bootrec /RebuildBcdand press Enter.

  Please post with the State of the question.

• try to do a slide show... pictures do not appear in the monitor while playing

  try to do a slide show. I imported several JPEG files and they appear in the media folder. If I double click on one of them in the media folder, they appear in the control screen, but when I drag them in the video timeline 1 they do not play.  the screen is blank. If I double click on one of them in the timeline that they appear in the monitor, but when I play them that nothing shows in the monitor.any idea why they don't play. ?

  Thank you

  Win7 64

  PreEl10

  Thank you whsprague... got it fixed... it's that darn... Nvidia driver problem somehow my computer for video driver updates without knowing me it... lol... and I found the driver may 2013, installed and everything works well again...

  Thanks for the help

• Satellite click 2 P30W Pro is not compatible with the monitor LG 29EA73 Ul

  My LG monitor works perfectly with all my other devices, but it can not detect the signal when I connect a cable HDMI Toshiba whith.
  I tried all types of resolution for Windows 8.1.

  What do you mean by cannot detect the signal?
  When you connect your Satellite to the LG using an HDMI cable can pass between the internal and external display by using the FN key combination?

  I don't have this machine and am not sure which button F has option for that, but I hope that you have already checked. Right?

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Documents Word 2007 open but will not appear on the monitor.

  When I try to open existing Word 2007 documents or start a new Word opens but won't that appear in the lower shelf. When I click the icon in the lower plateau, on what reached the document quickly slides off the screen to the right--and out of sight. I'm traveling to the Brazil and have been able to use BrOffice.org to access to and use, my documents. I have Windows 7 Ultimate, but did not bring my Office 2007 disk with me. I scanned for viruses and spyware, and there is not.

  Thank you

  Perfectionseeker

  Please repost your question in Forum Word to: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads where experts in Word will be happy to assiist you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Newbie: Pre 10 Clips will not play not (preview) in the monitor

  I am, I suppose, a beginner, because I haven't used at all first since v.6 and don't know for the most part with iMovie, Win Movie Maker and Corel Video Pro.

  I use PrE10 on computer of Windows 7 with 3 GB RAM and three recently defragmented or formatting of drives with at least 200 GB of free space.

  I use clips in Organizer as MOV files, and settings of the project have been properly adjusted to Standard DV.  The clips will play fine in the Organizer.

  In the first instance, by clicking on the button Play don't 'play' not the clip does not work (rotating circle) and don't go back to the Pause button that can be clicked to go back (in other words, nothing seems to be frozen).

  Dobuble-click on the thumbnail of media will launch the preview window, room can be clicked, but nothing happens.

  I'm SURE I'm missing a step.  Can someone tell me what this can be?

  1st, what version of Quicktime you have installed?

  QuickTime errors http://forums.adobe.com/message/4545437

  QuickTime X does NOT work http://forums.adobe.com/thread/888722

  ExporterQuickTimeHost http://forums.adobe.com/thread/1109614

  2nd, read Bill Hunt on one type of file as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

• M system does not start properly, the monitor shows a bad screen and I have to use evry time of system recovery I want to use my computer.

  If anyone had any problems please let me know.

  Thank you Michael for your help.  The first option worked, I appreciate it.  Thanks again.

• Failed to retrieve the kernel symbols does not have not to initialize the monitoring device can not find valid peer to connect to

  Hello

  I use vmware fusion 5.0.3 on osx 10.7.5. When I start the VM I get these three messages.

  Following this article, I opened the package VM and deleted the .nvram file.

  Still no go.

  I'm a fool. I had renamed some time ago mach_kernel file to test the caching of kernel from loading. This article Impossible to retrieve the kernel symbols gave me the idea to check the file mach.

• HP dv6 volume scroll not visible

  Hello

  I have hp dv6 laptop US 1350... the volume slider is not visible on my monitor the workload but not visible please help

  Hello

  Download and reinstall HP MediaSmart SmartMenu on the following link - note that you must have at least an another MediaSmart application already installed.

  HP MediaSmart SmartMenu.

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• Database alert is not triggered when the Oracle database monitor by mistake.

  Hello

  Database alert is not triggered when the monitor of the Oracle database by mistake. If we test the alert manually alert works correctly. Could someone let me know the solution for this.

  This isn't a question of PC or operating system. You should post your questions in the forums of Oracle database.

• Audio clip does not appear with the video

  I have AVCHD clips in a project. When I bring an element in the timeline, the audio track is not there. Audio does not appear in the monitor Source, either. I am able to play the clips on the outside of the first and audio is fine. When I right click on a file to view its properties, it lists no audio. I brought the same clips in first on another computer and the audio seems in good condition. I compared the settings on both computers and everything is the same. Pretty amazing things

  Clear all the cache preferences including these media:

  C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache

  C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache files

  Rename folder that image is and try again.

  Make sure that the card is copied to the hard drive first.

• 24 fps video does not play in the source CS5.5 without jerky movement monitor

  Problem: 24 fps video does not play in the monitor source CS5.5 without jerky movement. 30 frame will play well. I took the same shot 24 fps, using the same exact configuration settings and it played in my CS5.0. No problem. I have them side by side and checked to make sure everything was EXACLTY the same. The 24 frames per second call played smoothly in the monitor source CS5.0 Panel. Can someone tell me what the solution might be to get the CS5.5 play smoothly? When I visited on the timeline in CS5.5 he played smoothly on the timeline. Puzzled.

  > nikon d7000

  This is probably the cause.

  See for a workaround:

  http://helpx.Adobe.com/Premiere-Pro/KB/Nikon-D7000-footage-stutters-playback.html