Hide the number in a numbered list (or to put on its own line)

Similar Questions

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• How to hide the brackets and tuplet numbers?

  Hi all.

  Is available to hide completely the support numbers?  When I click on the support of the Tuplet window opens.

  

  I click on support to hide and hide the numbers.

  

  and I can see on the photo right tuplet with nothing. But after clicking OK, I still see number.

  

  He's not on the image above. Why? How can I do? Thanks in advance.

  When you hide the support and the number, they will not appear in the printed score. Try to print you have in pdf format and it is not on the printed score. However it is persistent with parentheses around it to mean in page view is a triplet is visible only in the score editor.

• Does not display do not properly on the page linked to numbered list

  I have a page where I placed numbered elements (instructions 1, 2)  Notice..., etc.). When I preview the page in RoboHelp 2015 the numbered list with numbers and everything seems good. When I view the output from RoboHelp file, the page with the numbered elements seems well. I inserted a hyperlink to this page (page A), another page (page B). When I click on the link to the page from page B, do not all numbers in the list on the page.

  The numbered list was created using several levels number list icon. All lists use a style.

  This problem does not appear on all pages that has been done with the help of the same structure and formatting. Any suggestions on how I might solve the problem number on the linked page?

  Margaret Johnson

  Post edited by: Rick Stone - deleted email address

  Hello

  Hmmm, it seems to suggest that when the linked page is presented, he somehow lost the link to the CSS of the page.

  It is when linking from another page, what happens if connect you the TOC? Same behavior?

  I remember in the weird behavior see happening with this stuff in my own projects. And in my case, I think I had too many nested folders. This should not be necessary, but it is solved for me was to copy the CSS in the same folder and ensure there is no character of "shortcut" leading to the CSS. (.. /) is the abbreviation.

  See you soon... Rick

• Width of drop-down list and the number of drop-down list values

  How to increase / decrease the width of a drop-down list on the screen of your interview? In addition, how you increase the number of menu options drop-down user, some of my options in drop-down list don't show up. This shows only 3 points:...

  For OPM 10.4:

  Increase the number of visible items in a drop-down list

  There are two options:

  1. make a regular drop-down list instead of a list of drop-down list box. Regular drop-down lists always display all items, regardless of the length of the list. To do this, set "enable-search-comboboxes = false" in the appearance.properties file. "

  2. increase in the search results max for the combo box in the file appearance.properties, for example 'search max-results = 20' (or another number as appropriate)

  See article OPM the User Guide for more details: http://docs.oracle.com/html/E54499_01/toc.htm#Interviews%20and%20flows/Customize_Web_Determinations.htm#Change4

  I have a vague memory that the increase in the width of the drop-down lists is a bit more tedious. I'll take a look and post here...

  See you soon,.

  Jasmine

• Page number variable based on the anchor text & SEO numbered list

  I looked and looked, not only in Adobe help centers but also just in Google, and I can simply find an answer one way or another to my questions!

  I would like to do 2 things:

  1 use a variable to refer to that page more information can be found on a certain subject (i.e. for more information, please see page #.), even if the page number will no doubt change I have continue to work on this project and eventually build my book from the various documents that I created.  I can insert a kind of marker or anchor text or whatever it is I need the information that I am referencing, as long as it is not visible, of course.  I would just have a dynamic reference, so I don't have to go back through and try to check my page references are all correct.  The variable of the current Page will help me not in this case.

  2. I would also like to refer to numbered tables I have; they are currently configured as being numbered by a custom paragraph style which is mode number, 'continue previous number "; Another situation where the table numbers will change because I continue to work on this book and I want a dynamic solution.  If I need to insert a variable to calculate the numbers in the table, rather than using the paragraph numbering style, it is very good; I prefer to do a little more work now, so that I can be sure my references are accurate, when this is said and done!

  Thanks in advance for any help you can give!

  Cross references.

• Count the number of drop-down list items based on the selection

  You will need to get an "account" (in the fields of totals at the bottom) of each of the values/items selected in the drop-down "ddClassification". My drop-down fields are labeled ' ddClassification.0, ddClassification.1... etc.
  
  

  Should a loop be involved? Been looking around for the answers but can't really find anything. The values in the drop-down list 'ddClassification' are 'Choose', 'Major', 'Minor', 'OBS', 'OFI '. If I could just get help on one of the "total" fields (for example perhaps the total large field) first then I could go from there. All THE HELP is APPRECIATED! Thank you!

  
  I have attached a screenshot and here is the link for the form: Dropbox - ASSESSMENT_NOTES.pdf
  

  Yes, this requires a loop. Here's the Basic code structure, which you can use for the total key, for example:

  var total = 0;
  for (var i=0; i<=4; i++) {
      if (this.getField("ddClassification."+i).value==4) {
          total++;
      }
  }
  event.value = total;
  

  Place this code in the script to custom calculation of 'txtMajor '.

  Edit: Name of the field max adjusted from 5 to 4...

  Edit #2: Also adjusted the value of "Major" in the value of exports 4...

• Show / hide the text box drop-down list database

  Hi all

  First time post here - wahoo!  :-)  Brand new user of LiveCycle, and so far I'm loving - very cool app!  I am a bit puzzled, however, and hoping someone can help...

  I am using LiveCycle version 8.05 and try to build a form that has a drop-down list with departments in our Organization.  If the user selects the elements 1-5 on my list, I want two other fields at autopopulated (one for the Admin Assistant) and one for Dept Head.  If however the user selects 'Other', I want a text box (it will be hidden the rest of the time) where the person will be able to type in the Department they work for.  For now, I'm only interested on getting the box 'Other' to appear; I'll worry about the other stuff later.

  Elsewhere in my form, I have a functioning drop-down list that displays a text based on the selection field; However, for some reason this logic does not work with the situation described above.

  My code for the working text field is (in JavaScript)

  var
  
  (sNewSel)
  case "1": 
  switch
  {
  
       TextField6.rawValue = "My text is in here";
  break;
  case "2":
  
  
  
  = "My second text is in here ";
  
  
  break;
  "3":
  
  case 
  
  = "My third text is in here.";
  break;
  TextField6.rawValue
  
  default:
  }
  break;
  
  
  TextField6.rawValue 
  
  
  sNewSel = this.boundItem(xfa.event.newText);
  

  After many fruitless hours yesterday, I got only to the extent where the code below; This was more or less copied right out of a post here.  When I click on the drop-down list, select 'Other', the text field is displayed.  I tried the definition of the text field to the times 'Hidden' and 'Visible' through properties of the object, but no luck.  I tried to use IF statements, subforms and anything else I could think of but am getting nowhere.

  var nSubLength = Subform1.nodes.length;
  var 
  sSelectField 
  for
  
  {if
  {switch (xfa.event.newText) 
  (case "6":
  Subform1.nodes.item(nCount).presence
  break
  default:
  Subform1.nodes.item(nCount).presence
  break
  }
  }
  }
  ;
  = "invisible";;= "visible";((Subform1.nodes.item(nCount).className == 
  "field") &(Subform1.nodes.item(nCount).name== sSelectField)) 
  (var nCount = 0; 
  nCount < nSubLength; 
  nCount++) sSelectField = fieldList.rawValue;
  = sSelectField.replace(' ', '');

  Any ideas?  This is very new to me, but I am familiar with other programming languages, and something this simple should not be difficult which leads me to think I'm missing something.

  Thanks in advance

  Chris

  It was easier to create a sample for you... Please see the attachment.  I think that's what you want.

  The code is on the change event of the DDList

  Paul

• Using the NI 9403 module as a source of tension for its own entries

  I need to have certain diagnoses in a circuit that I build. I plan on the use of certain relays to throw a switch when certain events occur. This switch would be connected to a digital input NI 9403, as a way to detect the event.

  To do this, I need power the switch itself, so he spends a tension that the NI 9403 module consider a digital camera 'high '.

  Can I buy a power supply of 5V, but is expensive compared to what it should only do. I was wondering if it's permitted use / safe / sane... at one of the NI 9403 pins as a digital output and use it as a source of tension for switches? According to technical data sheets, I should be fine for power supply. I'm not sure if it's a decent way to do this.

  My finished project requiring a current amplifier Board, I had to weld. So I decided that I might as well just add a voltage regulator to this Council and some resistance to simplify power. I never tried to use the NI 9403 module as a source of tension.

• Should HowHow I send my resume to your laptop to an IPad. I have another laptop which is mine, but I want to take the original turned off my phone friends to put on my own?

  So I ask two questions. How can one, I send my resume to my friends laptop, my iPad? And also how to send the CV to my laptop? I have to be able to send it, but what are the steps to do it?

  No doubt you have email on your iPad? Just send by email.
  Or upload to Skydrive and download on the iPad - the possibilities are endless...

• ORA-01785: ORDER BY item must include the number of an expression in the SELECT list

  Apex 3.1.1 Oracle 10g
  
  Hello
  I get this error message sporadically and finally understood how to reproduce the error constantly. The problem occurs in a standard report using the SQL query (body of function from PL/SQL returning SQL query). I found several other posts stating the same problem like this: Re: report sorting limitation
  
  My example on apex.oracle.com is here: [http://apex.oracle.com/pls/otn/f?p=23292:4:427533145943010:] with credentials of comments/example. Run the page 4. If you click on demo_customers and sort on credit_limit, and then click demo_users, you should get the error. If you click Debug, you will see the following text:
  

  0.06: show report 
  0.07: determine column headings
  0.07: activate sort
  0.07: parse query as: WFU_CARS
  0.07: query could not be parsed:
  select  * from DEMO_USERS
   order by 11,1
  failed to parse SQL query:
  ORA-01785: ORDER BY item must be the number of a SELECT-list expression

  It seems that the ORDER BY clause is not set to zero? refreshing? When the source of the report is changed. Note that sorting on demo_customers on the column credit_limit column 11. When executing the query of demo_users, an ORDER OF 11.1 is added to the SQL statement.
  
  Any ideas how to solve this problem? Thank you!
  
  Lisa

  Lisa:

  You can reset the current so specifications whenever you build a new query for the report area. Thus, in the pl/sql that generates the report query, add this line of code just before returning the query string.

  apex_util. REMOVE_SORT_PREFERENCES;

  CITY

• Using paragraph styles with numbered lists having paragraphs "child."

  Hi all

  I wanted just a checking the direction of your InDesign experts.

  When I create a numbered list when there are paragraphs separate 'child' who "belong" to the paragraph numbered list real (see below) how do I use paragraph styles for formatting the list?

  Currently I apply a style numbered list to each of the bold numbered paragraphs and just a style of body text indented paragraphs of the child. Is this fair?

  3.1 it is a topic but also a part of a numbered list

  This is the text that goes with the above heading

  This is another paragraph which goes hand in hand with the above heading

  3.2 it comes is a topic, but also part of a numbered list

  This is the text that goes with the above heading

  This is another paragraph which goes hand in hand with the above heading

  3.2 it is a topic but as part of a list numbered

  This is the text that goes with the above heading

  This is another paragraph which goes hand in hand with the above heading

  Also, is there a power automatically apply a style to the last bullet in a list (as with the last CSS child selector) so that I can have a small space after each of my balls except the last one where I would want a larger space.

  Is this fair? Yes. And if you want the style of paragraph number somehow, each model numbered to give his name to the list.

  The styles will be applied by you. To get the last point in space after, add this attribute to its own paragraph style, perhaps also giving it a keep with previous keep option.

  Or give more simple, perhaps the paragraph numbered line style certain amount of space before as one of its attributes under withdrawal and spacing.

• tab character to the left of the number of auto

  I have InDesign CS4 documents with lists numbered in various places in the documents. I was numbering them manually because I can't find a way to insert a tab character before an AutoNumber. The bullets and the dialog box numbering doesn't let me insert a tab at the beginning of the number of auto - gives an error message. The reason for the tab before the number is that the numbers will line up at the moment where there are 10 or more items in the list.

  Jay,

  You don't need to insert tabs, put you everything in the section 'Bullet and Position of the number' balls - and - Numbering tab. These work values for 10 points lackey:

  Alignment: right
  Withdrawal left: 6 pt
  First line indent 6 pt
  Tab position: 18 pt

  Peter

• How to create a numbered list paragraph style?

  You know what you would think it would be simple to make a numbered list paragraph style.  I created a new paragraph. style is then in the bullets and numbers on the style. Here, I chose dial. When I applied it in 11 paragraphs each begins with 1.

  If I go to the toolbar at the top and click numbered list market then it works as expected. My style of "Numbered list", and then has a +, 'Redefining the Style' is grey so I can redefine to try to fix it.

  What I am doing wrong?

  BTW, I also want to use a style of tank inside it for the first line, which is the main point of the ball being made (small caps/bold) < paragraph return > then, normal text for the rest of this bullet

  Thank you

  You are also asked to do the first line "BOLD". You indicate that it is its own paragraph, so you'll want a paragraph style that includes character attributes and the attributes of type numbered list while you're there. You use character styles only if there is more than one style in the paragraph which is not the case here. And then create a paragraph style second which is indented and non-bold for text "complementary." If you skillfully use the tags 'next paragraph style', you can have styles replacing automatically as you type, then you can apply styles to an entire list with a single command using the context menu command "style Apply, then next style." So, in short, I would use three paragraph styles:

  1 FirstNumberedList style (resets the paragraph style counter next is number 1, "BOLD", "Description")

  Style of description (withdrawal, non-fat, is paragraph style following "NumberedList").

  2 NumberedList style (continue the numbering, "BOLD", is style of following "Description" paragraph)

  Style (even before) description

  3 NumberedList style (the same as before)

  Style description... etc.

  To apply all the styles on a typical previously part of the text in one: select the entire list, and then Ctrl-click on the 'FirstNumberedList' style in the palette paragraph styles, and then choose "Apply"FirstNumberedList"then next Style." The first paragraph will be in the FirstNumberedList format, and all of the following in your choice will have a format based on the "next paragraph style" of the previous paragraph.

• Numbered lists nested in bulleted lists

  I had to create this:

  

  First level with checkboxes items are set up as bulleted list with a square shape of police Wingding for the chip.

  Second level (a., b., c., etc.) include a list numbered, configured as level 2. (Both use the default list and paragraph styles)

  
  

  No matter after checking the ' numbers restart at this level after ' for the second level, the letters second level will not re-start. (The lettering would begin with 'c' to "Organize materials" where I wanted to restart with 'a' as in the photo)

  It seems that InDesign will not recognize a list bulleted as part of a pattern...

  To resolve this problem, I changed the first list to a numbered list level. I assigned just a typical style of numbering (1, 2, 3, etc.), but he gave a character style that is white while the figures can be seen. Then, I had to draw the boxes with the shape tool and align the text.

  Is there a better way I could have done this?

  You could do that

  Make the box line with a heartbeat of a numbered list.

  https://DL.dropboxusercontent.com/u/17210757/numberedlist%20with%20squares.IDML

  The line with the checkbox is a numbered - list but I defined the style of Wingdings character and just put o ^ t

  o the square in wingdings

  Start at 0

  NumberList following the value 'follow previous issue '.