Hide the playback on a slide bar?

Similar Questions

• Captivate 5: hide the playback in embedded animation bar

  Hi all

  I'm creating a Captivate quiz in which I need to a play button appears in the display. When the user clicks the play button, it switches to a stop button, but at the same time, he plays a music video. To avoid having music playing in my quiz until the user chooses to play, I created the button as its own animation Captivate - 2 images, the first contains the play button and the second contains the stop button and music - and I have inserted in my animation quiz. Given that this animation is supposed to look just like a 'play' button and not as an animation, I need to hide the playback bar. From this forum, I learned how to turn the PlayBar using Action "OnEnter: assign: cpCmndShowPlaybar with 0. However, when I insert animation play button in my biggest animation quiz, even if I can't see the PlayBar, I see a grey bar where would the buttons of the PlayBar. Is it possible to hide this gray bar too? Or is there a better way for me to create a button that plays and stops at one file audio on command, other than what actually an embedded animation?

  
  Thanks for any advice,
  Karyn

  Hello

  Change the width of the bottom border in the skin Editor. Here is a screenshot. Normally with the default bar reading that this border is 31 pixels, if you do not use the playback bar you may uncheck the border or (as in the screenshot) to maybe 1 pixel.

  Lilybiri

  

• Captivate 5: hide the playback for a specific slide bar

  Is it possible to remove the bar reading and its controls to a specific slide to ensure that the user (after reading some information) necessarily must click on a button to go to the next slide?

  For example: I built a production in which the quiz questions appear at certain intervals. I don't want the user to skip the question slides and proceed just click on the Play button. I want that they to select an option and click on the Submit button, which then leads to the next slide. So is it possible to hide the PlayBar to these slides only?

  John

  Hello

  You have configured by action 'Enter' to the first Question slide hide PlayBar? So it makes sense that the action you set up 'Leaving' review slide (think you point to the slide of Score here?) is devastated when you re-enter the first slide of the question.

  Could you try to hide the bar just before reading the first Question slide, slide "output on" slide just before the first Question? I think it would work, since this slide will not visited again when you return to the first slide of the Question for review. In this case, the action triggered on leaving the Score slide has an effect. Did not try, am a rush, please obtain if it does not work.

  Lilybiri

• Icon display/hide the TOC on some slides/s

  Hello

  I'm trying to learn Captivate and im using version 8.1.

  Trying to show/hide the TOC icon on some slides.

  For example I want to display the TOC icon on some of my slides, except of these slides, I would like to hide.

  Searched the forum, but could not very well.

  Is this possible to do?

  
  

  Thank you..
  

  You can't easily change the buttons in the default player bars. But if you use a button custom shape on the first slide to turn the table of contents (only possible overlap), this time for the rest of the project button, always on top, it will have a unique ID (name). You can use the event to enter the slides when you want to hide this button table of contents: SB_TOC hide.

  To create a button to toggle for OCD, take a look on: 1 share = 5 buttons toggle - Captivate blog

  ATTENTION: a table of contents in overlay by default has a button to expand and a button to reduce the table of contents. The default buttons are the double arrows. You won't want to leave these buttons visible for the user. What can be done to replace the buttons (project, Table of contents, settings), which are indicated as "Icon to expand" and "Collapse Icon" by a small rectangle in the same color as the background color of the slide.

• Hide the display of Pacific navigation bar

  Hello

  I use jdeveloper 12.1.3, I create MAF application with login screen, and I choose 'show navigation bar on the launch of the application' at the CRG - application.xml, that I need to hide the navigation bar to the login screen, how can I do?

  Thank you

  There is an api standard for this

• Hide the mouse in some slides.

  Hello, people!

  Here I am, once again, with news of my trip with Captivate options. First of all, my boss has decided that the best way is to leave the 'lesson' only with demonstrations of drawing and after the lesson, put the student to practice with the software.

  For those that Don t understand what I m talking about, read this.

  Now I've finished (well, editing/retouching phase) my first lesson, and have some problems to fix:

  • I recorded a few slides of assessment, to put the student click in some options in the screen and the mouse appeared in all the time. There's a way to really hide the mouse, in the presentation? I Don t want the mouse appear when the student is one who will need to click in a box, or type something... I just want the mouse appear in the moments when I m showing something in the screen... Is it possible?
  • In some slides, my text caption boxes are "fading" (become very opaque at the end of the timeline), while it waits for the student to click in the clickbox? I Don t know what exactly...

  Well, for now, is it. I'll come with more, when I'm at the end of the lesson.

  Indeed, please keep this button 'maintain proportions' enabled.

  Captivate is indeed wonderful software for e-learning. If you already try to get training in Flash, similar to what you can get in first Grade (as I did long ago...) you need to fall in love with this program. I hope I was helpful.

  Lilybiri

• The playback controls replace the click box

  Hello

  This applies to both Captivate v4 and v5

  I have a project with playback controls that include the Pause/Play.

  I want to add two click boxes on a blade that the learner must click ' before being able to move to the next slide.

  When the slide reaches the first click box, the control Pause/Play display changes from Pause to play and the user can simply click on the "Play" option to work around the click box and move to the next slide, click point on the slide box, click 'replay' and then move to the next slide without having to go through the boxes click the slide.

  How can this be avoided so that the learner has to go through the slide via the boxes to click and do not use the set of playback controls option?

  PS. Playback controls Pause/Play are essential for the entire project, so do not show are not an option in this case.

  Noel

  Hi Noel,

  The simplest is hide the playback bar upon entering this slide and show again to the next slide. It is not possible to hide a button.

  Hiding on this slide:

  For action on enter to this slide, choose assign cpCmndShowPlaybar with 0

  Display the next slide

  For action on enter to this slide, choose assign cpCmndShowPlaybar with 1

  Lilybiri
  

• Windows Media Player: Hide the toolbar control to view full screen

  Hope someone can help me...

  I have Windows XP on my computer and Windows 7 Starter on my netbook and I can't find out about one of them how to hide one playback, pause, volume, etc. Control Panel down the screen when I play a wmv video, I created mode full screen. Any suggestions? It is particularly important for me to be able to do in Windows 7, as I play a slide show for a group of people in two days on this.

  Thanks in advance!

  Thanks - it started me in the right direction, but it was not actually found in the same menu for me. The way real, I managed to do was to first start WMP the only way I knew how, by double clicking to read my file mwv and then pressing the "switch to library" icon at the top right. The library, as there is no menu 'Tools' to choose from, I realized that, by selecting "Organize" menu, I can then select 'Options '.  Then I went to the 'Player' tab and the box 'Allow the auto-hide the playback controls' were found there.

  Thanks for the help :)

• How to remove the playback on iPad controls after the conversion of the HTML5?

  If you disable playback control in the CP5.5 skin Editor, it disappears from the SWF correctly, but still appears on the iPad after conversion of HTML5. Any way to remove it from the iPad?

  Take a look at this blog, scroll down and you will find how to hide the playback bar:

  y.html http://blogs.adobe.com/Captivate/2012/01/Rapid-eLearning-with-Adobe-Captivate-5-5-HTML5-wa #more-3743

  Lilybiri

• How to hide the sim 1 & 2 Xperia Z3 double icons

  I have Xperia Z3 D6633 double lollipop 5.0.2.
  How to hide the sim 1 & 2 status bar icons and save more space for other APA as a player, WiFi, alarm, calendar...?
  I turned off the State of the battery with the endurance and the percentage of the cause of the battery of the overcrowded state bar!

• Java blackBerry Slider Bar

  HII, I created a scroll bar by referring to the example:https://github.com/blackberry/Samples-for-Java/blob/master/Advanced%20UI/src/com/samples/toolkit/ui/...,.

  hereby I am slider properly displayed on my screen, but my problem is next to the slider bar, I want to show a play/pause button, so i used the code below:

  SerializableAttribute public class UIExampleSliderScreen extends UIExampleScreen {}
  private ButtonField _startPlayingButton;
  Private ButtonField stop;

  private ButtonField facebookButton;

  public UIExampleSliderScreen() {}
  Super (0);
  _startPlayingButton = new ButtonField ("Play");
  stop = new ButtonField ("Stop");

  facebookButton = new ButtonField ("Facebook");
  facebookButton.setMargin (5, 5, 5, 5);
  HorizontalFieldManager Manager = new HorizontalFieldManager();

  setTitle ("cursor screen");
  final SliderField cursor;
  cursor = new SliderField)
  Bitmap.getBitmapResource ("slider2_thumb_normal.png"),
  Bitmap.getBitmapResource ("slider2_progress_normal.png"),
  Bitmap.getBitmapResource ("slider2_base_normal.png"),
  Bitmap.getBitmapResource ("slider2_thumb_focused.png"),
  Bitmap.getBitmapResource ("slider2_progress_focused.png"),
  Bitmap.getBitmapResource ("slider2_base_focused.png"), 20,
  0, 16, 16, FOCUSABLE).
  slider.setPadding (20, 20, 20, 20);

  slider.setBackground (BackgroundFactory
  .createSolidBackground (0xD3D3D3));

  Manager.Add (Slider);

  Manager.Add (facebookButton);

  Manager.Add (_startPlayingButton);
  Manager.Add (Stop);
  Add (Manager);

  }

  }
  }

  (1) I am able to show only the slide bar, my custom buttons are not displayed?

  (2) the sliding bar is displayed on screen, fully, how can I reduce the length of my slide Bar?

  the field of cursor seems to be designed to occupy the entire width:
  public int getPreferredWidth()
  {
  Return Integer.MAX_VALUE;
  }

  you have to change this, or replace available to the Manager.
  See
  http://supportforums.BlackBerry.com/T5/Java-development/how-to-extend-Manager/Ta-p/446749

• branching projects the playback bar options

  Make us some connections classes and wonder about how other users discussed navigation with branching. Captivate does not (as far as I can tell) users to customize it that slide the 'next' buttons 'back' on the playback bar will sail and the progress bar shows where the Viewer is going, not on each slide. With the projects ramifications, the lack of flexibility both of these features causes a huge problem: how to give viewers control over what they see and keep the order of the content of the way we've designed?

  Right now the only solution we have developed with is to hide the progress bar and the next/back buttons on the bar games and include 'back' and 'continue' buttons on some slides. This isn't an ideal solution, because the CC should be visible, and have buttons on the bottom of the screen makes it hidden by the CC, then put them pretty far up the, whose ruins just the Visual on a large number of slides.

  Am I missing a feature in captivate? If someone has found a way to work around this problem, I'd love to hear it!

  You put the CSS in the file assets/css/CPLibraryAll.css.

  The css is not there, add, is that the CSS is the example I posted. You do not need to have color in the css, I added it for a specific project.

  To activate the CC on and outside, you need create a tip action associated with a button to toggle the use of the CC. the "Toggle" action and choose "cpCmndCC" as the variable.

• Reading not systematically hiding on the first slide bar

  Hello

  Another issue/question - I seem to have a large number of them suddenly.

  I build a project with a series of video slides where I want to use the playback bar as a means of uses to turn early, legends, etc. on video slideshow and break.  But I don't want the play bar on the first slide, which is just a simple swipe of welcome or any of the other non-video blades.  I thought it was an easy thing to do by setting "Hide bar reading" action entering the slide.  I thought that was working fine, but now I noticed that when I test the project, using the game in Web browser option or actually publish the site, the PlayBar appears at least half the time.  If I just refresh the browser it disappears... sometimes.  Sometimes, if it does not and if I hit refresh, it pops up so...  I put the project on a server and played from a different computer (a PC, because I'm on a Mac) and I get the same behavior always incompatible.  The playback bar hide work regularly in other slides a simple action or as part of a tip or shared action.

  I don't remember if this happened on earlier versions of the project, but it may well have been because I wasn't really looking for it.  I have nothing particularly advanced past in that the first slide and the only thing I could think was 'different', that an average project was that I used the widget CPGuru OCD, but I took on the first slide just to check, and that doesn't seem to change the question.  Does anyone have an idea, what could be the cause so I can get him to stop?

  I understand a cludge which seems to work, but don't really want to use it.  Basically, I duplicate the slide, remove the break of all elements (in this case a box single click) and then reduce the duration of all the elements and the slide itself juste.1 second - so I basically start the project with a duplicate version of .1second of the first slide that runs immediately in the 'real' first slide.  In this way, it seems that if she fails to close the IPL when he effectively reload this slide it hides the PlayBar so that the user sees only a small Flash.

  Any help in debugging this I can avoid the cludge is greatly appreciated.

  System:

  Mac Pro runs the Mavericks

  Captivate 7.0.1.237

  Flash Player 10 selected in the editing preferences

  Sometimes, depends on several factors, advanced by the first on enter (or simple) action has a slight delay and that's what I think. Was the same in all versions. The only solution is to avoid action on enter on the first slide, to add a short slide you did and trigger the action at the beginning of the second slide.

• How to hide the address bar when windows 'popup' fullscreening?

  Video player Sky TV has an implementation of bad full screen - you can make the player go true fullscreen, but it comes back when he loses focus, so I can't multitask on my two monitors.

  The best solution I found is to use their 'pop-out' reader, which opens a new "popup" - style window (locked address bar, no search bar etc) and I can't then full screen window itself (not the player). This allows me to hide

  -the outline of the window
  -the title bar of window
  -Windows Start menu

  and it remains enlarged when it loses focus.

  However, this does not hide the window address bar. On a larger window of Firefox at the normal address this slides out of sight after a short period. locked style "popup" window is not.

  On the offchance that treat differently the "pop-up" windows is a deliberate... Firefox security policy can I disable it?

  Well, this is embarrassing.

  I went to try to settle the dom.disable_window_open_feature.location from true to false.

  However, before doing so, I noticed that the address bar of the popup window was now floating as usual.

  I'll keep an eye on it in case it stops again, but for chalk now it up to the stupidity of the user.

• could you change the behavior of ff in full screen? I hate it when I move the whole page view tab bar. tab bar should slide on the page without moving

  could you change the behavior of ff in full screen? I hate it when I move the whole page view tab bar. tab bar should slide on the page without moving

  You can watch the extension auto hide:

  AutoHide: http://www.krickelkrackel.de/autohide/