Hide updated items in windows vista

Similar Questions

• Update failed for Windows Vista failed KB975517

  I get the same message update failed

  Hello

  In Control Panel - Windows Updates - right click top and HIDE.

  Then download and install it here:

  Update security for Windows Vista (KB975517)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=29842c0c-8930-4B5F-83c6-1a718974b63f&displaylang=en

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ----------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Update security for Windows Vista (KB979683)

  Update security for Windows Vista (KB979683)

  I get "error (s) found: Code FFFFFFFF.

  Help, please!

  Hello

  My friend has the same issue, you can try

  1 - run TDSSKIller

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  2. If this does not work, try to reset windows Update components

  http://support.Microsoft.com/kb/971058

  Finally

  3 try to run SFC/scannow

  http://www.updatexp.com/scannow-SFC.html

  keep us informed

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update security for Windows Vista (KB2753842)

  11 to install important updates have been received with checked to install.  After agreeing to install.  another, update security for Windows Vista (KB2753842) doesn't have the box checked.  Why he treated differently.  It is not appropriate?  Should I install?

  Hi Genereiss,

  Thanks for posting your question in the Microsoft community.

  I understand that all updates have been selected and installed very well while a KB2753842 update has not been verified, and that's why you were not able to install it.

  The KB2753842 update is designed for Windows Vista and is a required update. Check out the link and read the article for more information.

  MS12-078: Description of the update of security for the driver Windows OpenType Compact Font Format (CFF): December 11, 2012

  http://support.Microsoft.com/kb/2753842

  I suggest that you download the standalone package for this update and install it. Check out the link to download the update file.

  Update security for Windows Vista (KB2753842)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35938

  Let us know if you need more information.

• Update security for Windows Vista for x 64-based systems (KB2556532) installs several times

  Since 01/12/2012 updating security for Windows Vista for x 64-based systems (KB2556532), maintains the resettlement on my system through Windows Update.
  Whenever it says updated successfully, then update windows says that it is impossible to get updates. Said update was last updated 12/01/12.
  Evry time I reboot, this updated, re - installed.

  Hello

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to reset components to update Windows from the following link.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try the steps from the link below.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Why can't update security for Windows Vista (KB975560) never loaded on my pc I've tried for more than a year. no probs with any other updated

  just always fails and keeps coming back as an essential update, how to exit the loop

  Hi Flybywire,

  ·         You receive an error message?

  ·         How you try to install the update for Windows Vista (KB975560) security?

  Do the following to display the Windows updates history for the error code.

  a. click Start, type Update in the Start search box.

  b. in the list of results, click Windows Update.

  (c) in the left pane, click view update history.

  Follow the steps below to solve the problem:

  Method 1: Download the update manually from the Download Center and check if you are able to install it.

  Update security for Windows Vista (KB975560)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7130ce0f-df38-4C96-ac54-cdbff35f03e7&displaylang=en

  Method 2: I you suggest to perform the clean boot and then try to install it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.

• Update for Windows Vista (KB2505189), updated platform for Windows Vista (KB2117917) Supplement - french and a security update Cumulative for the ActiveX for Windows Vista (KB2508272) stop bits

  I have update for Windows Vista (KB2505189), platform update Supplement for Windows Vista (KB2117917) - french and Cumulative security update for ActiveX Killbits for Windows Vista (KB2508272). These updates get the 8007371B error code. I have Windows Vista 32-bit. I searched the Microsoft catalog available and tried a manual installation for these updates, but they have always failed. I have not yet tried to install it in safe mode. Is there anything else I can do to fix this?

  8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  One or more required members of the transaction are not present.

  Only the specific return code can be solved by running system, aka CheckSUR update readiness tool -.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  CheckSUR for taken over all the versions of basic x 86 (32 bit) Windows Vista

  When you are prompted to save CheckSUR, choose to not run it.
  When the download is complete, close all open programs and browsers.

  If the installed antivirus is Firewall Norton/McAfee party or a 3rd is used, then suggest you first boot system configuration before you run it.

  NOTE: In the clean boot state will be disabled all firewalls of part 3. Ensure that the native Vista firewall is now enabled - enable Windows Firewall on or off

  Now run CheckSUR (. Windows6 0-KB947821-v12-x 86.msu).
  Restart the system for the same configuration of boot clean and do a check for updates in Windows Update in Control Panel.
  If the system can search, detect, download, and install updates now, save an update of a subsequent test.

  If the system can or cannot now, cancel the clean boot configuration and restart in normal Windows mode.
  See if the registered update installs now.

  If the system still cannot install the updates, please copy and paste the contents of one of the newspapers that CheckSUR created when he ran. They are located in and are named

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  If the system can install the updates in the clean boot configuration, but not in normal mode of Windows, then there are 3rd party software which is the origin of the update installation problem.

• Do not open programs after installing Windows update operating system Windows Vista

  Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system

  After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open.  I don't know what to do.  The only thing that still works is the Windows Media Player.  I can't open Word or Excel, I can't access my photos.  Open Internet Explorer is like a weird nightmare but I am able to access the Internet.  I tried reinstalling my MS Office software, which did not work.  I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something.  Any ideas what I should do to correct the nightmare?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the internet after getting an update from Microsoft, Windows Vista Help

  After getting an update Microsoft my computer will connect is the internet. All services are disabled. I didn't get the updates and restarted my computer. How can I get services running again. When I did an IPCONFIG command output and renew it says RPC server is unavailable.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Error 800b0100 Windows Update encountered an unknown error when executing update security for Windows Vista (KB967723)

  Whenever Norton runs a scan of the live update I have the following message and am not sure how solve the problem - error 800b0100 Windows Update encountered an unknown error runtime security update for Windows Vista (KB967723). What can I do?

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100":
  http://support.Microsoft.com/kb/956702

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to show the updates available for Windows Vista

  Hi, people. I have a display problem in the updates that are available for Windows Vista Ultimate Edition. What does "Select the updates to install" window does not display an important 33 and 59 option updates that are available are displayed and I cannot uncheck those I really didn't need. I guess that it happened after I installed the Windows Update Agent 7.4.7600.226 (before I had a update of c. 7.2.6001.788). How can I make function?

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem Windows Update after reinstalling Windows Vista

  Hi all. I had a big problem, I get viruses on my computer and a friend who is an expert in computer science, says that I have to reinstall my Windows Vista Home Edition Premium, the virus is impossible to remove. I reinstalled who, install all drivers card mother plaplapla... Can I get the problem. When the computer install updates and restart the computer, just tested something: ' installation updated 1/3 0% "you know, it is allmost allways, but then comes the message as (sorry its Finnish and I translate Finnish to English., but I try):"configuration of updates failed. Updates to repeal. Do not close computer. "And then like 15 minutes and the computer to reinstall and updates are not installed. Even my friend don't know what to do, then, he said, that I should ask here. Sorry on my text, now is 04:15 clock, I tried to fix this several hours. I have reinstalled this about 2-3 weeks ago, first of all, I think it's a small problem, solved itself. Then I start looking for help and finally ask my friend and now I ask the help of your part. I'm sorry, I'm so tired, so I can't say to my hardcore computer, ask more, I have to go to sleep. Thank you.

  Perhaps this may be relevant-

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  When you try to install an update from Windows Update on a computer that is running Windows Vista, you may receive the following message: Configuring updates step 3 of 3. 0% complete
  After you receive this message, the computer returns to the screen that displays the same message. In addition, the update is not installed successfully, and the computer restarts.

  or see: Description of the preparation tool system for Windows Vista update -.
  http://support.Microsoft.com/kb/947821