Do not open programs after installing Windows update operating system Windows Vista

Similar Questions

• Can not recover partition after installing a new operating system

  I recently bought a laptop G62-a31so and it came with windows 7 x 64, from the beginning, it could not start most of the programs, they would break everything simply, I got the idea I want to install windows vista on, which works well with my previous PC, I planned to create discs of recovery beforehand, but I couldn't be bothered when I discovered he required 4! DVD-s and it says in your manual that I can recover my system at any time of the partition. So I formatted the partition that has windows 7 on it before and installed vista, then I discovered that you have some drivers vista for this laptop, I tried to return to the status quo by the recovery of the partition, you press ESC on startup, then f11 in boot menu, but he started just vista.

  I would like to know how I could restore my system to factory settings now?

  You can try this, which works for many people (not all) >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' – Reboot and it will automatically start in the Recovery Manager (without pressing F11).

• After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

  Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black

  The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.

  Hi Jeremy,.

  Thanks a lot for your help. You're right, I should have said no upgrades and updates.
  There were a total of 10 updates:
  4 a security updates for Vista,
  1 security update for the Microsoft 2010 information access path,
  1 day of cumulative security for IE9.
  1 windows Live essential 2011
  1 definition update Windows Defender (KB915597)
  1 "" for Office 2010 "
  1 April 2013 malware tool
  I uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.
  I also checked the graphics card and told me that I had the latest version of the software.
  Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.
  How and why the full frame disappeared April 16 remains a mystery.
  Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot.

• When Envoy e.mails with doc files I can not open them I use windows vista 64

  When Envoy e.mails with doc files I can not open them I use windows vista 64

  Hello

  You must have the program installed to be able to read the attached files that programs

  for example, if it is a .doc file in the attachment, you installed Word

  .xls, you need Excel

  . PPS, you need Powerpoint

  etc.

  but fortunately, there are FREE viewers provided by Microsoft for the accessories of extension file above that will save you having to buy Microsoft Office

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  and you can try the FREE Open Office applications game to read these file extensions

  http://www.OpenOffice.org/

  and here's how to set file associations

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• Cannot open/save to files and programs after installing Windows updates

  original title: Windows Update - major problems

  My daughter has an HP laptop.  She has downloaded the Windows updates and now she can't open most of its programs.  Those that it can open, will not work correctly.  Some won't let him save, some will leave him no open files she saved in them.  If she tries to delete any program in the Control Panel, add and remove, she receives a message that there is a mistake and that the program has already been deleted. (Even the programs that it can open, but do nothing). Some of its programs to tell him that she is missing a .dll file.  If she found on the Internet and she sees something she wants to save, she used to be able to right click and save, now it does not get the dialog box when it right click.  She uses Firefox not Internet Explorer.  When she downloaded updates, the resarted the computer as usual, but when he arrived at stage 3 of 3 it locked to 0% (with NO hard disk activity) and would not go further.  She let it harden for more than half an hour and finally pressed the power button to force it to turn it off.  When she turned her back on updates have continued as usual.  Is there a undate for the Wacom which was attached to the computer at a time. Everything worked fine before she comes to install the updates.

  Hello Mel_F,

  Thanks for your post.  Initially, we will execute the file system checker.  If that does not solve the problem, the next is to perform a Startup Repair.  Please let us know the results of these utilities so that we can help you get this resolved.

  See you soon

• Could not launch Kaspersky after installing Windows updates

  yesterday, 14/08/12 after installation recommended windows updates, I lost my kaspersky virus program, tried to reload the disc and has been unsuccessful, what I'm doing. After instaaled of updates, I noticed that I had lost my virus program. I tried to open it in the programs list, nothing happened. I tried to reload the disc again, nothing haoppened. I don't want to work without an antivirus program. Can you help me?

  Original title: yesterday, 14/08/12 after installation recommended windows updates, I lost my kaspersky virus program, tried to reload the disc and has been unsuccessful, what I'm doing.

  Hello

  
  1. do you receive any error messages?

  2. remember you than the update that has caused the problem?

  Method 1:
  I suggest you to uninstall Kaspersky using Kaspersky removal tool.
   
   
  Download and install the Kaspersky removal tool
  Reference: Kaspersky Internet Security 2012
  
  http://support.Kaspersky.com/FAQ/?QID=208279463
  
  Method 2: Put the computer to boot and then try to install the program
  Put the computer in a State of boot is a way to know which application is causing this problem.
  Step 1: follow the steps in the link below to do the same thing:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Note: After a repair, be sure to set the computer to start as usual as shown here:
  Step 2: To configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  
  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  See also:
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
  I hope this helps.

• Cannot open iTunes, after installing Windows updates.

  Original title: I Tunes

  Just did a windows update and now ITunes doesn't open

  Hi Sean,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. What are the numbers of installed Windows updates Knowledge Base article recently?

  3. that you get an error message when opening ITunes? If Yes, what is the exact error message?

  This problem may occur if the iTunes software is corrupted.

  I suggest you to uninstall and reinstall iTunes and check if it helps.

  
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Hope this information helps. Please provide the necessary information to help you further, I'll be happy to help you.

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

  Original title: start windows vista to the top of the page. (URGENT)

  My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

  Hi Antonio,.

  You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
  update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358/en-us

  Also see the KB article and check:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I restore my programs after installing windows Ultimate edition?

  Hello, I do a final install of custom windows and all of my programs will come... How to restore it for example my iTunes and all games

  You can not copy programs from one computer to another, you must use the original media. A program installer does not just create a program folder and copy the files into it. The installer will change the registry, set the permissions of folders and files, save the files in the library used by programs and create all shortcuts.

  Unfortunately the backup options that include all Windows restore itself prevent a clean install.

• Why not full screen after installing windows 8 (on windows 7) is there a solution?

  I used Windows 7 with VMware Fusion and had no problem with the screen, when I decide to choose for full screen, I got a full screen.

  After you have installed windows 8.1 on windows 7 I have a problem with the mode full-screen, of course, I can choose full screen, but then I don't get the max screen. The view of windows 8 is only 33% of the screen I think or maybe 50, but this isn't what I want. How is it possible to change this, or is it not possible? When I choose full screen of course I want to see windows 8 on the full screen, not for part

  Hello trebor66,

  Welcome to the VMware communities forum.

  First thing to try is to completely uninstall VMware Tools (if installed), reboot, then install VMware Tools (and reboot again).

  Who help me?

  --

  Wil