Highlight BasicEditField instead of wrap

Similar Questions

• Stuck highlighting affected elements Iphone 6 s, iOS 9.2

  Phone dropped and in a fraction of a second the phone entered into mode of climax, where it will not stop highlighting everything you touch.

  I reset the phone and it is still emphasizing everything I touch instead of entering it.  When I try to use my password to get back to define what to highlight numbers instead of inputing the.  Help?

  I drop same mine (iPhone 6) and it's the same thing. I have tried rebooting several times and same thing. I can't enter my access code if the phone is useless. Everything I type just gets hilighted and that's it. I have updated to iOS 9.2.1 yesterday morning and now this...

• -Music without words showing player

  I have a small question. I received the lyrcis on the screen when I got the Razr, but all of a sudden they stopped to show. I did a search and found the same problem on the Atrix, but nobody has an answer.

  Hoping to get help here... I like that idea... my grandchildren loved singing but now they are quite.

  Thank you

  It does not show on every song - some old stuff or more obscure labels does not support. In some cases, the five words don't highlight and instead another window will appear.

  In addition, you must have music "scroll bar" down to see the lyrics. Basically, it alternates between bar scroll or words.

• How can I save images in 16-bit grayscale in Labview without IMAQ

  Hi, I'm trying to record images in grayscale of 512 x 512 16-bit of the camera for each period of time (eg. every 5 sec) and also display them in the control panel in the corners.

  However, I can get a bunch of pictures of bluish and greenish rather than gray ones. Please give me some advice. I really appreciate it.

  Please see the attached VI. Thank you.

  I would simplify the gray color table code:

  

  Then, you must map the values 16-bit to 8-bit of the display values.  Right now you are just forcing to U8-U16 table which is likely to smudge the highlights.  Instead, you should find the table max and min and scale the entrance so max-> min scales 0-> 255.

  (x min) /(max-min) * 255

  Whimsical programs do not use a linear, but it's a good start.

• compulsive saving xps documents

  Why should I now Save a document when I print from my computer. If I don't want to save I get an error notice printer and it used to feel. If I accept to save a copy in a folder of xps documents it still feel used.  I rebooted my my software but nothing has changed. I still cant print from my computer.

  This problem started only recently so I wonder what I maybe changed or do, I downloaded software that has changed for me. Now he's become more than a joke and I have exhausted my very limited knowledge bank.  Is there anyone out there that can help this geriatric old return to a normal life.

  When you click on print, above in the drop-down box, you have "DOcument XPS printer' set highlight, which means you want to print to a file.

  If you want to print to the printer, scroll the scroll box until you see your printer name and highlight it instead.

• Does anyone know how to change the culmination of auto from 'no' to 'yes' in dialog.ask?

  No big deal here, I want to just my 'Yes' button, highlighted initially instead of the 'no' in the dialog.ask function. Anyone know how to change it? Thank you!

  Something like that?

  int choice = Dialog.ask (Dialog.D_YES_NO, "You want to stop downloading?", Dialog.NO);

• How do you do < div > tags line up in Dreamweaver CS6?

  Y at - there no way to make the div tags dash so that the opening and closing tags are aligned vertically?  How apply the formatting Source, sometimes the final tag is at the end of a line of code instead of wrapped to the next line and link up with its start tag.  Are there any settings for this to happen or extensions for this?

  Go in Edition > Preferences > Code Format > Tag Libraries.   After setting your formatting preferences.  Record.

  Access the commands > apply Source format.

  Nancy O.

• Flash ActionScript 2 Help menu: Correct link path BUT Incorrect "Menu Selection"

  I was wondering if someone could me grace with some information.  I lived in the stone age when it comes to web design and have finally reached out to learn some basic flash.

  I'm working on a website for a friend of the family and I unfortunitly found myself in a rutt with part of my menu flash.

  The site is www.luxuryincr.com; If you visit the site, you will see my main question about the menu.

  Example: If you were to click on "fishing" (http://luxuryincr.com/index-3.html), you will notice that after all the ACEs, the menu will highlight "Home" instead of "Sin" (which is not what I want to happen).  It is a recurring question with many menu selections.  I'm sure it has something to do with the ACE, but cannot get a grip on him

  If someone is able to help me, I would be so grateful!

  ________________________________

  It comes from ACE for the tab 'fishing '... I'm not sure if this is even the issue takes place but I say to myself that there must be someone who of a genius in Flash and can be able to point me in the right direction.

  onClipEvent (load) {}
  NUM = 4;
  this.hitArea = this.area;
  }
  on {(overview)
  If {(_root.page <>num)
  this.gotoAndPlay ("s1");
  }
  }
  on (releaseOutside, deployment) {}
  If {(_root.page <>num)
  this.gotoAndPlay ("s2");
  }
  }
  on (release) {}
  If {(_root.page <>num)
  _parent ["Item" + _root.page] .gotoAndPlay ("S2");
  _root.page = num;
  getURL ("index - 3.html");
  }
  }

  Please, I beg you! Any kind of help would be appreciated! Thank you!!

  You must use:

  onClipEvent (load) {}
  NUM = 4;
  this.hitArea = this.area;
  }
  on {(overview)
  If (_root.page<>num) {}
  this.gotoAndPlay ("s1");
  }
  }
  on (releaseOutside, deployment) {}
  If (_root.page<>num) {}
  this.gotoAndPlay ("s2");
  }
  }
  on (release) {}
  If (_root.page<>num) {}

  _root.page = num;  // <-assign before the following code
  

  _parent ["Item" + _root.page] .gotoAndPlay ("S2");
  getURL ("index - 3.html");
  }
  }

• Double click on a page causes Firefox to go back a page instead of highlight at the insertion point

  I have a Logitech iFeel MouseMan. The side button is set to double-click. Sometimes instead of highlight to the cursor position the tab jumps back a page. (In other words, it is as if I had clicked the button left of the return address bar.) This abnormal behavior doesn't happen if I physically double click with the left button of the mouse. This anomaly came a year ago and a Google search has a Firefox configuration setting that solved the problem. Now I do not think the setting and a Google search provides no answers. I solved the problem by resetting my computer to a previous point of reset, but it is an inelegant solution - and it takes hours. (The problem does not occur now. I ask for the future). I prefer to do the problem by changing the appropriate setting of Firefox to go. Logitech told me that the problem is not with the mouse, or its software, but with Firefox and that I should ask experts of Firefox.

  I don't know what setting that is actually, but here's how you can understand.

  1. Enter about: config in the address bar, press enter
  2. Accept the warning
  3. Type of mouse in the list filter field
  4. Settings no standard are "BOLD", now you should be able to see which setting you have changed

• Question: Mask Highlighted instead of the layer.

  I have Photoshop CS4. He has recently developed a flaw: when you click on a layer it highlights, if you open the channel option, the channel mask is highlighted instead of the RGB layers. Please notify. Richard Batt.

  Thanks for all your advice. As it happened I loaded a selection of one of the layers, in this specific case, and cleared the problem. In the future, I will apply the solution ctrl/shift/alt. Thanks again. Richard Batt.

• You can remove all the highlights at once instead of one at a time in a PDF document?

  I have 12 PDF each of which is 300 to 600 pages where someone has highlighted large parts of gree, blue and yellow. I want to keep all yellow highlights and remove all green and blue. Is it possible to do without having to remove the strong points of each page? Any help is greatly appreciated!

  Kevin

  This could help you. You will have to do this on a per-document tho basis but should work.

  Click on the comments tab at the bottom left of the page. Choose display choose by type and choose annotations to text editing. Sort and choose the color. This niche all green, red etc inside a comment with an expandable + nest for her. Now, just click the Green and press from the trash, repeat for blue. Hope that helps?

• Calendar highlight - Eve picked instead of today

  Apex 4.1
  I use the calendar to display some data but there seems to be a problem with the update to the current date.
  For example: 25 Sep 2012 is the date of today, but the development of the calendar remains somehow 24 Sep 2012 and I do not understand where I put this right.
  Few users see focus on the correct date while little seen on the previous date.
  
  Also, in another tab of the application, I use an interactive report that displays data based on the calendar entries have been made earlier. Here I have two areas today and tomorrow who choose the report values and display them in the respective region, but also here today (taking date yesterday) and tomorrow (today the choice)
  I'm confused about where put right bcz as I said few users (based in AU) see this incorrect values while users located in a different region to see correct.
  
  Any help appreciated.

  Hi Swetha,

  Please set [url http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/bldr_attr.htm#HTMDB28195]Automatic zone to Yes.

  Kind regards
  Hari

• Processing of the steps of 40 + "cases" manage subscriptions to e-mail group, desired look instead of single list column

  I am creating a custom subscription management page and have about 40 groups of emails I would like users to be able to manage their preferences on. I want to format e-mail groups box to check and be in more than one column instead of a long list.

  I am running into trouble. First, I brought in all the e-mail groups as single contact fields check box. This turns the page in a super long list of e-mail - not desirable groups. I can set up the processing steps so that it works to subscribe or unsubscribe to groups of e-mail users, however, I want to look more aesthetic where the e-mail group options would be in the columns.

  

  

  I am wanting a solution for the boxes of the e-mail group to fall into the columns. However, when I use the approach of adding a custom field group > > column three custom > > then download a list of all the e-mail groups, can't do the processing steps allowing subscribes and cancels his subscription. In the steps of treatment, that it looks like the entire entity boxes wants to correspond with the group just email. I need the solution allowing each group of e-mail under the boxes to be able to map to a different electronic group at Eloqua and SFDC.

  

  Can someone help me?

  I want to be able to have my email subscription group text boxes in a list of multi-coloumn aesthetic, instead of one single long list. It is essential that the solution still allows processing steps to unsubscribe or subscribe users to this group of specific coordination with the box e-mail they either checked or disabled.

  Here, the answer is in the code.  What you need to do is to use CSS to create fake columns in your layout.  So what you need is a container wrapped around your input box element (and label).  The necessary code is likely to vary, but the example of bootstrap below is a good reference to highlight the code.  In this case, the container with a 'field-group' class is used to contain the entire box input element.

  
   Email address
  
 

  In this example, the form-group class is what you want to style.  In the CSS, you will need to use the following text:

  . Form-group {width: 33%; float: left ;}}

  This style will cause the width of the form group confined to a fixed width of 33% and the left float attribute will allow the element to be removed from the flow of the document and create a type column in your page look.

• How message list change color / highlight

  can we separate all the emails in the message list, with the lines below them or replacing the list with highlighted and not highlighted? I can't find any option, something similar to the attached picture, thank you

  You (we) have been "taken" by Microsoft's decision to hide extensions of known default files. Microsoft thought that it would be easier for novice users, but instead, it poses a serious risk to safety.
  
  The following link shows how to change this setting.

  Show file name extensions
  
  http://www.file-extensions.org/article/show-and-hide-file-extensions-in-Windows-10

  Now you should see the full file name and I think you'll find that your "userChrome.css" file is actually ' userChrome.css.txt', which is false.
  
  In addition, your file 'chrome' should only show the file "userChrome.css", with no other file or folder. (Perhaps at another time you could add other files; not today.)
  Rename the file, place it in the appropriate folder and delete the useless file. Close, and then reopen Thunderbird and you should be good to go.

  FYI: one of the problems with the print screen is sometimes the path window is long enough to show the full path, so it is difficult to see one additional folder level.

  TB - 38, 3 Win10-PC

• From 8/24, most of my emails go directly in the trash instead of the 'Inbox '. I have some companies, like the Daily Herald, etc. that I want to receive.

  I don't know if it was the result of an update to Thunderbird if this problem started when I created a filter for unsolicited junk e-mail that I had received. When I clicked "Run", each email "in box" went in the trash, instead of just the item that I had highlighted. I then highlighted all of the trash and he returned to the Inbox. None of the items I've retrieved from the trash and you want to receive were among the 685 items listed in my filter of junk e-mail messages. I have no idea how all of these got messages filtered as trash. I had hoped the problem has been resolved, but as the day wore on, I noticed that almost every email I received still went straight to the trash.

  Examples of emails I love receiving: Daily Herald updates, Netflix, global market, Best Buy, etc. I don't have to demand for payments of invoices from the 8/24, but I have to assume automatic responses to planning a payment will also go to the trash. Even the Mozilla Support e-mail that was sent just when signing into my account went straight to the trash. There are several emails I want to keep to my file, so I don't want to close my account and start again. It seems personal friends messages are still in the 'box', but each business email goes directly to the trash if desired or not. The screening went to the extreme.

  The help section does not resolve this issue, so I am at a loss on how to solve this problem. It doesn't seem to be a process to do the opposite of message filtering. In the dream world, I would need to highlight the messages I want to receive.

  An overview of this issue would be most appreciated.

  Problem solved. I used Google search for my problem and found some very good information on troubleshooting. The last filter, I created for spam, I clicked on 'does not contain' rather than 'contains' and therefore each email message unique since that time obviously did not contain these key words, as they were going into the trash, I received!

  What a relief to retrieve new messages in the box in. Thanks Google and those who offered assistance to someone in the past.