highlight of sub - VI not shown LV2010

In Labview 2010 (andy may 2009) the Green RUN arrow highlight does not identify a Subvi running of the block diagram of the higher level (BD) VI when you click on highlight (the light bulb icon). I can confirm this works very well in LV8.6.

Recreate it by running a Subvi in a top-level VI using while loops in each. Then activate the debugging of climax and LV2010 does not show running green arrow on the Subvi running. LV8.6 works very well.

Thought I'd throw this since I have spent a lot of time looking for why my new code stops and initially I am able to determine execution location in the current code.

Attached are LV2010 and LV8.6 screws which show the question. These attached VI do nothing and this is just to demonstrate the problem... When you click the highlight icon.

I think the question comes down to when you press the Highlighter button.  I watched your version LV8.6 in LV9.  If I start the VI, then press the button to highlight run, I see not a green arrow on the Subvi.  If I press the Highlighter button before starting the main VI, I see the green on the Subvi arrow when he gets to it.  If I uncheck highlight execution, the green arrow goes, but just when I turn on highlighting once again.

So it seems that shows green arrow depends on whether execution of climax is on when the Subvi is entered.

I think that the behavior as eventually replaced between LV 8.6 and LV9.  When I support saved your VI and down them on LV8.5 (I have not installed anywhere 8.6 to check this right now), the green arrow will still be visible on execution of climax.  Personally, this is the behavior that I prefer.  I wish I had the green arrow show even if I turn on highlighting after entering the Subvi.  In this way, you know where you code can be blocked.

Perhaps someone with NEITHER can comment on the behavior of the green arrow with peak performance and confirm if the behavior has changed.  It seems to me there, and not for the better.  I'll go so far as to suggest that it is a bug that was introduced in LV9.

Tags: NI Software

Similar Questions

  • When you use fireftp I use the FTP user name and password to connect, but then when I try to connect I get "password not shown" in the lower left corner. Why?

    That's what shows the box below:

    331 user [email protected] OK. Password required

          PASS (password not shown)
    

    Many terminal-style applications remove the password from appearing in the journal of communication, to protect any person who could later read the newspaper. I think that FireFTP that emule. It is important to be able to view the password?

  • I have install windows 8.1 and to use as a dual boot Linux, but linux not shown in boot pls help me

    Hi Acer, I use Acer V3 - 571G i5. I have install windows 8.1 64 and Linux 64-bit for use in dual boot, but linux not shown in boot pls help me. When I boot it shows only windows 8.1. In my computer the drive not present but is disc from the drive partion what linux installed shows as logical.

    Someone on the net says 'change the UEFI boot legacy '.

    but I can't have this option in my Woods, please help me where is and how to change...?

    You can't update 1.x to 2.x and you do not need.

    you just erase you the Ubuntu grub after windows 10 installation, follow the first link on the post of JordanB.

  • Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

    I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

    Hello
     
     
    I would like to ask you a few more things.
    1. how many network connections you have created?
    2. are there multiple NICs installed on the computer?
     
     
    Since this is a common problem and many users have solved this problem by using different methods.
     
    This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
     
    As the article below also indicates that there could be multiple reasons for the same.
    The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
    http://support.Microsoft.com/kb/945925
     
     
    Method 1.
    I ask you to remove any network connection if you have created and then check.
     
     
    Method 2.
    For control please check in mode safe mode with Networking if the problem exists.
    Here's how:
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
    e. when Windows starts, use check and Internet explore if the problem persists.
    For more information, see the articles below.
     
    Troubleshooting in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
     
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Not shown other BBM profile picture

    Hello

    I had a problem with my BBM for Android. I got 1.0.0.72 version.

    The main problem is that others cannot see my profile picture, my profile picture not shown do not in their device.

    I have changed the image of many times, changed the screen name and my profile still not shown to the other picture.

    I tried to wait for more than 30 hours and the image still not shown to others.

    Is there something wrong with my camera? I knew that someone who has used the same camera as I had and he had no problem with profile picture. His image shown in my device and others.

    I tried to uninstall and install the application, but the same as the front problem.

    Could you help me solve this problem?

    Actually my problem already solved. What I did is just to create a new BBID. And with this new BBID, can I change my profile picture and others can see my profile picture.

    And if I change my BBID to the previous and change profile image, others cannot see my profile picture. Totally different with the new.

    If I read the knowledge base, the main problem are:

    1. the device is unable to connect to the Infrastructure of BBM.

    2. an error occurred during the process of updating the view of the image or avatar.

    This Knowledge Base is not for me, because I can change the profile photo and others can see my new PIC if I used the new BBID. But if I went to the old and change of image, others cannot see my profile picture

    Quite bizarre, because I used the same device and network.

  • Captivate 9, sensitive slides on a Mac and a PC publish the slides, timed objects (show/hid) do not shown in the final html5.

    I have some 9 Captivate, sensitive slides on a Mac and a PC.

    When I published the slides, timed objects (show/hide) not shown in the final html5.

    Some slides contain objects such as some graphics (png), the arrows and text boxes that have a period of delay or show that for a given time.

    They work within Captivate when I executed the chronology, but do not yet show in the published code. I tried several different browsers.

    Any idea why these objects do not appear?

    Thank you, I have yet seen that I didn't just look.  Once, he toured. Jim

  • vcomposer server not shown when deploying vm clone related

    Hello

    I installed the server vcenter and vcomposer on the separate virtual machines and their databases are on another virtual machine. (set on a sql 2014 VM server)

    now the deployment of virtual machine using the linked clone method, vcomposer server not shown in the view manager?

    TNX

    VMware View 5.0 Documentation Centre

  • Track format at the Conference of a "WAV" on other media metadata are not shown

    Hello as the title says, of her when I listen to a piece of format 'WAV' meta data are not shown to the reader. We see only available under the title. Comment to ensure that the name of the artist, album, gender and other components are well shown in the wav file at its conference on other media? Yet, when I load the file in the application hearing we see very well the name of the artist, the title of the album and the music genre. Unless there is error in the fields used, so what are the fields that I have to fill out to make sure the name of the artist, style, album etc? Thank you

    The correct in hearing is the one indicated in the column ISRC in CD view. If this column is not displayed, you can add it by clicking on the fields of name of column above and selecting from the menu drop-down.

  • sides and prognoses are not shown in the images of the film, although that marked in the LR presets. Who can help?

    sides and prognoses are not shown in the images of the film, although that marked in the LR presets. Who can help?

    found the solution: the film was small!

  • iTunes Foto Mediathek standard not shown

    Hello! iTunes does not show the standard foto mediathek in ' copy of fotos of. " Only records are available. What can I do to change ist "Fotos", which is shown as standard on all other MacBook?

    I ve got: you must mark "foto-mediathek" in Fotos to the 'system' in 'Einstellungen'... :-)

  • Qosmio X 770-4 GB of RAM not shown

    I have a Qosmio X 770 with two 4 GB RAM modules installed, but the details of the system show that the total system memory 4.00 GB of RAM.
    It also shows that 4 CPU cores when there are 8 shown in Device Manager.

    If I get either module of RAM, the system always displays the 4 GB of RAM.
    Either chip in each slot is 4 GB but nothing I can to build the system to show 8 GB.

    What is going on?

    Hello

    I assume you are using Win 64 bit...

    The 64 bit OS is able to manage more than 3.2 GB RAM... the question is therefore probably linked to incorrect parameters in the msconfig.
    Go to msconfig (in the search type msconfig)

    In the 'STARTUP' tab click on 'advanced options '.
    Then uncheck the box stored up , and then click OK

    Then the limit max memory should not exist.

  • LabWindows 2015 Titlebar UIR classic and not shown as classic Panel

    LabWindows/CVI 2015, complete development system, Version 15.0.0 (413)

    In my test code, I put in a DLL to call from TestStand, I a UIR displayed when I need the user to return a switch on the test station. I have the title bar of the Panel, established in the Visible and the classical style. Which seems, in the LabWindows/CVI development window, with the title centered at the top of the Panel. However, when I have the window that appears, by using either an executable LabWindows or LabWindows DLL function call to TestStand, the Panel is not displayed as classic. The title is left justified at the top of the window. The code, indicators and controls work fine. It all works on a functional level, I prefer the look of the Classic (centered title) sytle.

    Is there some files that I need to include in the project / linker to have the Panel located in the classic style?

    NOTE:

    If you're wondering what I did to the uir:

    I realized, after removing the code that is not relevant to this discussion, the code that I use. The IUR is a laminated board. For the rings around the switch, I have layered the outer ring, inner ring and then the switch (up and down). For the text, I created a text box to place text inside. I could not determine just how to put text on the screen without using a text box. However, I couldn't put the framework of text box to zero or change the color. So I placed a decoration of chassis on the text box frame and changed the color of the background color decoration to give the illusion that the framework of text box is not there. When I run the code, although the text boxes have been defined as indicators, when the user has placed their mouse on the text box, the box would move slightly and highlight the text or the framework for this kind of thing. The user could not change the data, but it annoyed me. To get rid of it, I placed a decorative box on all of the panel layout interior color to transparent. In this way, said he layered on the text boxes so that text boxes don't behave oddly. Finally, I put the control in FACT on top of that, so that the user could say the test program when the switch of the test station has been configured according to the needs. Also, the omega symbol uses the value transparent background image control.

    Unfortunately, the classic title bar, is visible (observable) for signs of the child only. For parent panels, it is the Windows setting that determines the display of the title bar.

  • Coating not shown

    Hello

    I get images from a camera with 90 fps. I need to evaluate each of them, but want to display each image 10.

    I posted a picture with my attempt.

    The problem I have is that the overlay on the image is not be shown on the front. However, according to the "probe" (sorry, German version), the overlay must exist.

    If I each image shown, the overlay is flickering.

    Thanks for your help!

    Greetings

    You have the kind of race condition in your VI (images transferred by reference, not by value).

    Add IMAQ copy before display. In some cases the method call Refresh Image may also be useful.

    Andrey.

  • LabVIEW program works in highlight mode and does not not in normal mode

    Hi all

    I want to explain my program first,

    I wrote a program where try to establish communication between Labview and the microcontroller. I am trying to select the com serial port automatically by this program. I joined VI which shows the logic that I used. LabVIEW checks each port working on the computer, writing of visa "and expected to read the '." The fi ' is recived then the loop ends here and shows the good port where the microcontroller is connected. Otherwsie, he continues to look for... each logic works I tried to check in any case, it is work, but it does highlight mode. When I try to run in normal mode, the loop is not able to properly read the microcontroller running permanently. I checked for the output baud rate, no bytes ect., tried somany ways... but it still does not work.

    I checked with all the delays, but I could not understand the problem. I don't have much expirence with Labview... Can someone please help me solve this problem?

    Thank you

    Dembélé

    I see a lot of possible race conditions in your code and no time between write 's' and read the port.

    Also follow these steps:

    Do this way:

    You may need to reverse your logic too.

  • 5.1 speakers with Creative Sound Blaster Live! Center speaker and sub plays not

    5.1 speakers with Creative Sound Blaster Live! Sub and center speaker plays only not to aid the Winodows Sound Test tool found in the READING DEVICES > CONFIGURE

    I tried to connect the speakers on my other PC Windows 7 and it works, I tried 2 different PCI on the problem computer sound cards and still no luck.

    Front right, front left, rear right and rear speakers left are OK and will be made a sound of "hung" when I click on them in the graphical display, but from the center speaker, no matter what drivers I have installed, not quite sound...

    Hi paokara777,

    Follow the steps on the below link that explains how to enable the sound surround using SBLive Application.

    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&lang=en&docName=bph05667

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • I am able to share my older iPod Touch in to a newer generation aircraft?

    I am able to share my older iPod Touch in to a newer generation aircraft?

  • Support doc

    I bought my daughter the slate for Christmas last year. The loading dock has not worked since March. It is still new looks. It has not been used because it does not charge. I don't want to buy him a new, I would get it fixed. Is it all the same to fi

  • DeskJet 5480: hp deskjet software costume

    I have baught a flea market f5480 all in one and the disk that came with it wouldn't let me install it I downloaded the drivers and full software on the hp site which included software deskjet costume, but what actully I expect in the suit of softwar

  • Broken USB port does not recognize mouse or iPod.

    Original title: Broken USB port. My usb port broke on my laptop and wheb I try to use my second port is not recognize my mouse or my ipon. Can someone please help

  • Ud1 does not work in ODI 12 c

    Any help about 12 c on UD1 ODI does not.When I'm with UK instead of UD1, it is capable of producing the code correctly.  However, when I use UD1, the code happens vacuum as below. Any help please?Update < % = odiRef.getTable ("L", "TARG_NAME", "A") %