His 40L7335DG does not work on usb files

Similar Questions

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.

  My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.
  When I delete a file, none of these files are saved in the Recycle Bin.

  tried to restore desktop icons. no use.

  Tried to change the icons as method 2. Yet, my deleted files are not saved in the trash.

  My last bag of stuff.
  I assume that your allotted basket size is too small or you were not "empty" the collector for a LONG time.

  Right click on the Recycle Bin > properties > size under Custom, how many MBs are awarded?
  Mine is 1023 MB. I saw someone almost 5000 MB.

  Increase size, play with the numbers until the darn bac actually works the way it should be.
  Please post back. I'm curious to know the result.

  t-4-2

• Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Please see the links below:

  https://forums.Adobe.com/thread/1848277

  https://forums.Adobe.com/thread/2055767

  Let us know, if you still get the same error even after trying it all the steps mentioned

• The new tab (+) does not work, or the file/new tab feature

  The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

  This problem may be caused by an extension that does not work in the current version of Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• A100-529: OTG database does not work on USB ports

  Hello.
  I bought my laptop a few days ago and I have already problem.
  I've got OTG Databank with HARD drive (it is Apacer ShareSteno CD211 with 20 GB IBM travel... Disc).

  And here's my problem:
  Computer cannot start this database. When I plug it in, notice of Windows it is a new device, install driver and... bah! There is nothing aside.
  No new system disk. And when I look in Device Manager there is a "!" next to the data bank and error called "Code 10".

  I found some information, it happens because the USB port does not provide enough energy for the data bank. So I bought a cable that can be plugged into 2 USB ports, so it takes more power from the 2nd port. But it does not work too!

  I'm quite sure, data bank is fuly operational because it works with at least 2 other computers laptops and desktop computers 3.
  Could someone help me?

  Hello

  According to Microsoft, the "error code 10" page if the device has a FailReasonString value in its tone hardware, the string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:
  This device cannot start. (Code 10)

  Recommended resolution
  Device was able to start. Click Update driver to update the drivers for this device. On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

  Ps: It's only a piece of Microsoft, but if the USB device is unable to work because of the low power, you should check if it works with the external USB hub that supports an external electric power supply

• Tiara startup script does not work when running file associated with

  Hello

  I have a startup script that works correctly with tiara itself, however when I open a file associated with tiara (tdms files) the startup script does not work.  Is it possible to ensure that the script runs without worrying?  Thanks for the help!

  Bala

  Hi Bala,

  Depending on your use case, I suggest you call the next VI, which comes with LabVIEW, after your purchase VI is the creation of the data file.  Just pass the data file path in the upper part of entry and your path to the VBScript file in less than entry.

  "C:\Program Files (x 86) \National Instruments\LabVIEW 2013\vi.lib\ExportToExcel\DIAdem report Assistant Start CSC.vi '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• USB 2.0 does not work on usb 3.0

  Just bought a logitech wireless controller. It is USB 2.0, but my Dell running Windows 8.1 has 6 USB 3.0 ports and does not work. Troubleshooting I tried just said old logitech controller will not work. Please help thanks

  This utility may be correct then.  Have you checked the site Web from Logitech for this model number see if it is supported on Windows 8.1?

• Re: Game does not work - d3dx missing file

  I installed a few game yesterda, but none of them do not work,
  Always missing file, files, like "d3dcompiler_43.dll" d3dx10_43.dll... .etc

  My friend told me just to download from the internet that never missing files but I guess the download of microsoft or toshiba or nvidia Web site will have more security.

  Please correct me if I'm wrong!

  Please show me the link or step to solve this problem!

  Thank you!

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8109 to download. You should also find that the required files on the CD-ROM to install the game in a folder that is supposed to be called DirectX. I think you should have jumped the DirectX installation whenever you installed a game.

• My his laptop does not work

  everything done even a convenience store, I still does not work

  everything done even a convenience store, I still does not work

  Open Device Manager > scroll down to sound, video and game controllers > right click on the audio device > select uninstall.

  Restart your laptop and leave the system to find the driver. You may need the sound card driver that came with the drivers for laptop and demand media.

  Now, visit the manufacturer's Web site for updating your sound card sound card driver.

• 2 s Store.E Aluminum 2.5 "does not work for USB 3.0

  I bought years ago 1 external HARD drive and I used it with my laptop on the other society it connects via a USB 2.0 port.

  I recently bought a new laptop N56VZ-S4364P and I tried to connect my HARD drive via a USB 3.0 port, but it did not work.

  It seems strange, because the HARD drive is a USB 3.0 connectivity.
  Indicator light of power/data, but the operating system (windows 8) does not detect the external HARD disk.

  If I try to connect the HARD drive on my old laptop, it works fine.

  I need your help to find the solution to this problem.

  Thank you
  Gianfranco

  Hello

  I don t think its a Toshiba HDD question since HARD drive works well in the context of other USB ports.
  So I think you should check if your USB 3.0 port would recognize the other USB drives.

  Maybe its a problem of USB port.

• No-a-Ref does not work with audio files?

  I use LabVIEW 2013 32 bit under W7 - 64.  When I open an audio file and you write for, for example ref is valid, Not-a-Refnum? function returns True.  Is this a limit known audio file?  The same is true with the example program OR 'His file to the Output.vi' when an audio file is opened in read mode.  The works of VI, but the Not-a-Refnum? is set to True.

  DaveT

  This is a known limitation. The screws of Sound do not use a real LabVIEW refnum, they take advantage of just the type of file refnum to conceal their own internel reference as a LabVIEW refnum That has the advantage that you can wire not accidentally other refnum or integer to these screws, but that it is not working with the primitive IsNotA Refnum(). The node RefnumToPath in any case never could work, even if these screws used a real refnum of LabVIEW, given refnum would be a refnum of Sound specific resource, not a file (normal file or datalog) Refnum, which is type single refnum where the Refnum of the function of the path runs on for pretty obvious reasons, like other resources in LabVIEW are not a valid path.

• Movie Maker does not work with MP4V files?

  When I work with purchased the DVD, the error message that it does not recognize the MP4V of Movie Maker files. What can I do?

  Hello
   
  
  Thanks for posting in Microsoft Community!
   
  
  If I understand correctly you want to know if MP4V files are supported by Windows Movie Maker in Windows XP.
  
  I'm sorry to say but Mp4V files are not supported by Windows Movie Maker in Windows XP.
  
  To learn more about the supported files, please see the following link:
  
  Formats supported by Windows Movie Maker in Windows XP file
  http://support.Microsoft.com/kb/308464
  
  I have also provided a section below it may be useful for future reference:
  
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ
  Hope the information is helpful and let us know if you need assistance on Windows.

• Hi quite regular, the "save under ' and 'delete' does not work in the file menu?

  Hey delete it and save that the buttons do not work in the menu file, any help please

  Is that what you want to do? A web site, or the browser itself?