Where the second slot expansion non-primaire on EliteBook 8540p?

Similar Questions

• Where is the second slot of RAM on Satellite M100-165?

  Hello

  Sorry in advance for my English :)

  I have Toshiba M100-165 (PSMA1E-01W00PG3) and you want to upgrade memory RAM. But I see just a free memory slot on the bottom of my laptop. According to the manual and specifications of the laptop, there should be two slots. Where is the other? There for you, and how can I access it?

  I will be grateful for the answer.

  You are right. There are two locations of memory, but only one is user expandable!
  In my view, the other is placed somewhere under the keyboard.

  But like I said it's only one scalable user. So, if you open the laptop to access the second slot, you will lose the warranty.
  It is therefore advisable to ask and ASP technician to upgrade memory on the second slot.

  Best regards

• Update the second slot memory for Satellite M100-221

  Good day, everyone!

  I'll expand the memory up to 2 GB (1 + 1 memory modules). But the second slot so that it is placed somewhere under the keyboard.
  1. exactly where?
  2. could you please help how to get it?
  I really have no desire to take apart the whole notebook!
  Maybe someone has the photos how to upgrade memory.

  Many thanks in advance.

  Maybe this page will help you http://www.irisvista.com/tech/laptops/Toshiba-Satellite-M105/take-apart-notebook-1.htm

  I have to write something. For RAM upgrade its slot on the low side and in manuals s is described how this should be done. I don't know if it is advisable to remove the keyboard because you can void the warranty valid. Maybe you should call the authorized service and clarify this before starting the disassembly procedure.

  Good luck!

• HP pavilion 15-p153nm: I can't find the second slot of memory RAM... pls help

  So I bought the new laptop (hp pavilion 15-p153nm), in the shop where I bought it says that this laptop have two memory slots, so I buy the new 4 gb ddr3 ram card and wanted to put in the free memory slot, but when I opened the laptop that I couldn't find free one slot... so my question is where is this second slot... I use other products (printers and laptop computers HP etc.) for 10y and if this is an hp error and they didn't put the second slot in this notebook, I'll be very disappointed.
  And yes I find manual for this laptop, I opened this laptop from this manual and he drew two memory cards but its all is said about memory cards. I have pictures of the laptop and everything and I will put them here.

  

  

  Configuration software Specy

  

  It says that I have a free slot? but I still don't see.

  Now I'll put pictures of the laptop inside

  

  under the keyboard

  

  Other side of the main card

  

  Under the motherboard

  So pls help me to solve this mystery of the second memory slot.

  And sry for my English isn't my main language.

  TNX for helping me. Good bye

  There is no second slot of memory in this model specification.

  You need to replace the module installed with a capaity module above uppgrade the memory capacity.

  On the three t pageit the manual describes two locations only on some models. It does not describe what models they are.

  

• The amount of additional memory can be placed in the second slot. Best battery?

  The details of my laptop are: system manufacturer Hewlett-Packard model system Presario V6000 (GG228PA #ACJ) Type of system based on X 86 PC processor x 86 Family 6 Model 14 Stepping 12 GenuineIntel ~ 1862 Mhz BIOS Version/Date Hewlett-Packard F.25, 12/05/2007 SMBIOS Version 2.4

  Total physical memory 512,00 MB DDR II. (2 Rx16PC2-53005)

  1. how much additional memory can be placed in the second slot.

  2. If I use only one slot, the total amount of memory can be placed?

  3. What battery Ah maximum can be changed to the existing farm CT: 6301501BB UNFRJ and its cost?

  Maximum total memory is 2 GB and the unique maximum is a 1 GB module. It uses of the SO-DIMM DDR2-533

  This is a new battery 12 cells on eBay:

  http://www.eBay.com/ITM/95W-genuine-rechargeable-12cell-battery-fit-HP-DV2000-dv6000-V3000-V6000-EV089AA-/390317484515?PT=Laptop_Batteries&hash=item5ae0bc29e3

  It will be a bit curved on the bottom but the most long-life battery, that you can buy for him.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Can not find the second slot memory on my Satellite M40x-112

  Hi people,

  I want to improve my memory, preinstalled are 2 sticks of 512 MB. In the description it is said that the maximum is 2 GB so I bought 2 x 1 GB, unfortunately I can only find a housing... Is someone can you please tell me where is the other?
  Thank you

  Welcome,
  Sebastian

  Well, I found information that one slot is USER scalable. This means that the user can upgrade the memory only in a slot located at the bottom of the unit.

  I guess that the second location is hidden somewhere under the keyboard and the keyboard should be removed first to reach the second memory location.
  But this would nullify the warranty if you would remove the keyboard by yourself.

  In my opinion, you should contact technician tan allowed for this upgrade

  Greetings

• Die only lead to T3500 - can I put the new (soon to be OS drive) in the second slot?

  T3500 with single drive

  Windows 7 pro 64-bit

  Original Dell drive (Seagate) is dying, according to Seatools. Cannot get Seatools for DOS to boot so can not do follow-up proposed by Seatools.

  The disk OS must ALWAYS be in the first place?

  Or can I leave the player dying in the first slot and put the new in slot 2?

  I saved the player dying on a disc USB external, and done the checkdisk for several hours.

  New drive (WD) Acronis, so hopefully I can just clone the old drive to the new. But I could always use wise counsel on this part as well.

  You need not connect by USB disk. Connection to a free SATA port will be much faster. You need a cloning utility that you can put on a CD or a bootable flash drive, then just select the origin and destination drive.

• Slot of RAM missing in EliteBook 8540p

  I need help to understand if I have been cheated.

  In my case, I have 4 GB installed in my EliteBook 8540p and it is only on the memory module connector.

  Recently, I planned to upgrade to 8 GB and that I have to install both modules to 4 GB (a location is limited to 4 GB) but I do not have a physical location.

  In the specification of the 8540 is written that there must be two or SODIMM four slots support dual channel memory.

  In my EliteBook 8540p there is one.

  Is there a solution?

  

  The module slot and soDimm primary memory is located under the keyboard. You have found the location of memory expansion module.

  

  You will need the Service & maintenance guide to use as a reference.

• Where the second RAM on the Elitebook 8540w location?

  Hello, I have the Elitebook 8540w with processor i5 and windows 7 Pro. I bought two 8 GB cards to increase the ram, but can find accommodation with a stick of ram in it.

  The manual says there are two slots for ram and it can be upgraded to 16 GB. But the video installation shows a slot under the keyboard. I thought he would have another slot somewhere once I opened and removed the keyboard. But there is no. Also, I opened the compartment in the bottom where other portable store their ram and it was not a slot.  My computer said it has 4 GB of ram installed on the computer. The stick I found was only 2 GB, which means that there are another 2 GB key somewhere. Anyone know where and how to get home? Thank you very much.

  Best,

  Jeremy

  You are the very welcome.

  This isn't the problem.

  The problem is due to your mobile workstation with the i5 processor - it only supports 2 x 4 GB of memory.

  You must have the quad core i7 for PC to support 2 x 8 GB of memory.

  Please refer to the link below, page 7, double asterisk.

  http://h18000.www1.HP.com/products/QuickSpecs/13529_ca/13529_ca.PDF

  I quote:

  * 8 GB SODIMM is supported only on the quad-core processors.

• How to find the lines, where the second column only has a defined value

  I have a table like
  

  CREATE TABLE MY_MAP
  (
    USERID     NUMBER(10)                    NOT NULL,
    SYSTEMID  NUMBER(10)                    NOT NULL,
  )

  The data in the table can be as below
  

  INSERT INTO MY_MAP VALUES(1,6);
  INSERT INTO MY_MAP VALUES(2,6);
  INSERT INTO MY_MAP VALUES(3,6);
  INSERT INTO MY_MAP VALUES(1,9);
  INSERT INTO MY_MAP VALUES(2,7);

  Now my requirement is to find all these IDS that are at systemid 6 but not at 9. That is to say
  
  2.3. [since 1 is both in the 6 and 9], should not be recovered.
  
  I did two courses is a loop. Can someone give me a single query to do?

  SQL> select * from MY_MAP m
    2  where SYSTEMID=6
    3  and 0=(select count(*) from MY_MAP m2 where m2.USERID=m.USERID and m2.SYSTEMID=9);
  
      USERID   SYSTEMID
  ---------- ----------
           3          6
           2          6
  

  or

  SQL> select * from MY_MAP m
    2  where SYSTEMID=6
    3  and NOT EXISTS (select 1 from MY_MAP m2 where m2.USERID=m.USERID and m2.SYSTEMID=9);
  
      USERID   SYSTEMID
  ---------- ----------
           3          6
           2          6
  

  or

  SQL> select * from MY_MAP m
    2  where SYSTEMID=6
    3  and userid not in (select userid from MY_MAP m2 where m2.SYSTEMID=9);
  
      USERID   SYSTEMID
  ---------- ----------
           3          6
           2          6
  

  or

  SQL> select userid
    2  from MY_MAP
    3  where SYSTEMID in (6,9)
    4  group by userid
    5  having sum(decode(SYSTEMID,9,1,0))=0;
  
      USERID
  ----------
           2
           3
  

  Max
  http://oracleitalia.WordPress.com

  Published by: Massimo Ruocchio March 1, 2010 10:43

• EliteBook 8540p: is the engraver of DVD 595759-001 for Elitebook 8540p plug-and-play

  I have a DVD ROM drive, only in my 8540p here, and I just ordered a DVD (595759-001) burner to replace it with. Just install the hardware? Is this going to be a plug-and-play experience, or I need to find drivers for the replacement? Do I need to uninstall the driver for the original DVD ROM?

  Hello

  The driver for any optical drive is provided by Windows, then you should just connect the new device, but it can sometimes avoid problems by doing this as follows.

  Hold down the Windows key and press R.  In the run box, type devmgmt.msc and press ENTER.  Expand the DVD/CD = ROM readers, made existing right click the device and choose uninstall.

  Once completed, stop the laptop and made the new optical drive.

  When you start Windows, then, give it a few minutes to load completely and you should find the new drive is running.

  Kind regards

  DP - K

• Where is the 2nd slot of memeory z60m (2529-WATER)? Help!

  I try to get to 2 GB by adding a second memory card 1 GB.  Found the DIMMs installed in the factory under the Palm, but couldn't find where the second slot.  HELPPPPP!

  OnTop is the location you found. The film installation illustrates this perfectly.

• Second slot memory broken from the factory?

  I have a HP Pavilion m6-1000eo.

  My problem is when I try to add more memory that it just snaps into the second slot. I tried with a memory of my old mac and to be sure that it is not the memory that does not fit I also tried to put in the memory supplied with the computer at the secondary location. The original mem. organic pollutants persistent and at the main location with a team, but it does not work in high school.

  I suspect it's something wrong with the comp. from the factory since it's as if something is in the path of memory, so it cannot slide at bottom. I hope that you can see if this is the case in the pic.

  Thank you!

  Hello

  I don't see anything bad about the picture. You have to push the module with more pace sometimes, but be careful. Perhaps a picture angle toward the slot can bring up more.

• I have 8 GB of Ram in the 1st slot DIMM... can I add another in 2nd slot?

  I ordered a HP Evny 310xt 700 with windows 8.1

  I opted to have 8ram in a Dimm location instead of 4ram in two slots...

  I had hoped to get another 8ram module into slot 2 when my pc gets... so I'll have 16 RAM, but I have a hard time to know where I can get the original parts of HP. I haven't tried th parts store to HP no chance. I don't want to throw the 8ram far which is delivered with the machine and two others... I want to keep the 8ram that comes with it... and add a unique 8ram.

  "The part number for my module memory 8 GB is part number 698651-154"

  do I have to use the exact same part of the manufacturer?

  Thank you very much in advance

  Hello

  Yes, you can add 1 piece of 8 GB to the second slot to make 16 GB as shown:

  http://support.HP.com/us-en/document/c04344813

  You can use the other RAM with the SAME characteristics but using the same RAM is much better in terms of peace of mind. HP RAM may be slightly more expensive.

  Kind regards.

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">