His fade after each 25 minutes get stoned, help.

Similar Questions

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR: NTVDM CPU has encountered an invalid statement." Close to terminate the program.

  I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR:"NTVDM CPU has met an invalid statement. " Close to terminate the program. "The file may be corrupt is either the update.exe from the game or the command.com in windows system32. This has happened before, and the only thing that I did to get the game back is to perform a system recovery (which im gona not remake). I want to know how to prevent the "update.exe" or command.com to be corrupted every update of the game. I tried to contact the manufacturer of the game, but they do not seem to respond immediately. and their forums are not as useful as I thought it would be. PLEASE HELP ME!

  fl0bot,
  The message you are getting means that there is some corrupt system files that could not be fixed.  If you look in the CBS.log file , it should tell you which files.  When you do that, you can try to replace the corrupt files.  However this seems to happen whenever you update it a game then you will need to contact their support for aid as this can be a problem for them.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I shutdown computer after a few minutes his restarts automatically

  When I shutdown computer after a few minutes his restarts automatically

  Try this... you can first unplug your cable ethernet and if it does not restart... here may be the problem. The following has worked for me, but I tried not to disconnect the cable first.

  Open network and sharing Center

  In select it left panel > change map settings

  Right click on Local area connection > properties > configure

  Advanced tab

  The title of the property (listbox):

  Select > Shutdown Wake-On-Lan

  In the value (drop down list): (change) turn off

  I hope that helps!

  Jason

• How do I give the answers of my modem in a VI after each command that I send it so that I can see and document his actions?

  Hello colleagues LabVIEW'ers!

  I created a program that will interview a modem which is connected to the serial port on my pc.  I use the VISA starting functions by the serial port set it up and then I plugged into the function WRITE, then the BYTES to the PORT, then the READ function and finally the CLOSE function.  The problem statement is as follows:

  ~ How do they give answers of my modem in the VI after each command, I send it so I can see his actions and ultimately to report query out of it?

  Furthermore, I don't know if my commands syntax is correct.  Otherwise, I used a program called cygwin interface and a single command, I used is "ssh root@"ipaddress"[enter] This brings me to my modem connection control.  The cygwin command syntax would work with my labVIEW VI? If not, then how can I know what the command syntax to use to query my modem to LabVIEW?

  Additional information

  Modem - modem Satellite 'Evolution '.

  Version of LabVIEW - Professional 8.6.1

  Method of communication - Serial Port

  I appreciate all the assistance of those to receive, and I also hope that responses to this question are many who come through it.

  It seems that you have some apples and oranges here. Cygwin is a Linux for Windows environment. It gives you a bit of Linux look-and-feel in Windows. SSH is a secure, shell, which is a network protocol, not RS - 232. The serial port is a different interface. It may or may not have the same commands that you use on ssh - the manual will tell you that.

  Regarding the serial interface that you want to do, it looks like you want to just do something like what did the old LVTerm . You can give that VI a test to see if it does what you want.

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• HP 5150: After each print job, I get a "printed in the test document. How to stop the test sheet?

  After each print job, I always get a 'test page print '.   I don't know how to stop printing. Any ideas?

  Hello

  ·         Using the HP Deskjet 5150 color inkjet printer or all-in-one printer, HP Photosmart C5150?

  ·         Were there recent changes made on the computer or the printer before the show?

  Follow the form of measures troubleshooting article and check if that helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  If the problem persists I suggest you contact HP support for help:

  http://WWW8.HP.com/us/en/support-drivers.html

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• I get a blue screen permanently after a few minutes of a fresh reboot (Windows Vista)

  Hello-

  All of a sudden, I'm now the blue screen permanently after a few minutes, each time that I reboot.
  Here are the details of the error on a blue screen:
  operating system version 6.0.6001.2.1.0.768.3

  locale 1033 ID

  BCCode: d1

  BCP1: 9890A21c

  BCP2: 00000006

  BCP3: 00000008

  BCP2: 9890A21c

  operating system version 6_0_6001

  service pack 1_0

  product 768_1
  Please help - it has made my computer useless.

  Hello

  Have you made changes on the computer before this problem?

  Try the following and see if it helps.

  
  Method 1:
  
  Step 1:
  Try to boot in safe mode and check if it helps.
  How to start in safe mode in Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
  Step 2:
  Try a clean boot to safe mode and restart the computer in normal mode.
  How to solve problems using the clean boot in Windows Vista: http://support.microsoft.com/kb/929135
  Note: Once the diagnosis has been made, make sure that you try to step 7 of the article to reset the computer as usual.
  
  Method 2:
  
  Run the checker system (SFC) scan files and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833

  For more information, see the event log using Event Viewer. Please see the link below for more information on how to use Event Viewer to check the error message or information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  See also:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233
   

• Had to reinstall Creative Suite Design Standard 5.5 after reset of Mac, so I lost all my applications. 3 minutes after completing installation, I get this QUIT SAFARI CLOUD HISTORIC message to complete the installation

  Hello, I bought Creative Suite 5.5 Design Standard in 2012, my iMac had problems for my apple store reset I lost all my applications. 3 minutes after completing installation, I get this QUIT SAFARI CLOUD HISTORIC message to complete the installation, I called Adobe but refer me, it is a forum. I really don't want to pay an extra $ every month I paid for this package, I want to just use it. Can someone guide me how to install best regards, Michel

  Hi Michel,.

  Please open the monitory of activity by going to Applications > utilities on your Mac. You can search any processes with the name of SAFARI COULD HISTO and close it. More detailed instructions can be found here: error with Adobe products: close the following applications.

  Also, make sure you reinstall your CS5.5 disc or direct download. If you use Time Machine or similar backup to restore your programs on your computer reformatted, you may encounter issues. Adobe programs do not correctly migrate due to hidden files permissions.

  Let us know if that fixes the problem reinstall CS5.5or if you need assistance.

  Best,

  Del

• Photoshop elements 14 why the spinning wheel appears after each action for several seconds or minutes?

  After installing Photoshop elements 14 I get a spinning wheel after each action mainly to the editor and Expert. As soon as you click the mouse for an action to complete the wheel appears and often does not stop.

  Why is this?

  On a Mac

  reset your preferences-

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

• How to get the CR/LF in copied text only after each paragraph?

  I am currently getting CR/LF after each line.

  Have you tried to export the file in text or doc format. That could give him what you want, especially if you keep the flow of the text.

• Favorites gets duplicated, rearranged, deleted, moved, or all the above after each cold start PC.

  Since the 26/08/12 in the bookmarks to a folder and subfolders either disappeared, were reorganized in other folders or "Unsorted Bookmarks", duplicate, 'old' old records of Netscape appeared in more recent cases of Mozilla, the bookmarks and folders were duplicated, but bookmarks in them were either older of the last (see Netscape) or have been removed or foregoing. The last folder of Netscape (version 8) and the Mozilla one have reversed positions, (the latter used as superior to Netscape one). This happens after each cold start PC. After several attempts of troubleshooting, it happens now in all folders. I save the bookmarks in a folder in My Documents separated as regular backups that seem to all be corrupted in the same way. I even purge the SYNCHRONIZED data and who has done nothing to solve this problem. I deleted the old bookmarks for Netscape 6/7 and the problem persists. Removal of duplicates is worse. Maintenance of places add worked only 2 consecutive days; Therefore, it is more effective. I have to restore the backup that I did whenever I use Fire Fox after a cold start.

  Have you checked all the backups JSON (10) in the folder bookmarkbackups to see if there are still no corrupted bookmarks?

  If all of your bookmark backups are damaged, you must first repair in a pure and uncorrupted places.sqlite file or try to do that via a tag HTML the backup is an appropriate HTML editor.

  If corruption always occurs after the computer starts and some security software is the most likely cause for this.

  You have not answered what firewall and antivirus that you use.

  Some security software has virtualization or sandbox features that can cause problems to protect and restore files in the Firefox profile folder.

• How can I get Word 2007 to reset the default printer after each draw?

  I'm not the most tech savvy person in the world, but I know my way around MS Office well enough; When my boss got a new computer last month, I helped to set up, install the MS Office, etc.  Now, she complains constantly that he does not restore the default printer after each draw and "my old computer used to do that for me - I never know where it'll print now."

  How can I configure sound MS Word to print from the default printer each time unless otherwise selected?

  I have the default printer specified in Windows, but each time she chooses an active printer, MS Word uses the current printer instead of the default printer.  I just need to know how to solve this problem?

  If you open a doc Office that it allows to print to the printer origonal used when saving this doc.

  If you use the Btn Office Orb, you can select the printer

• The display turns off after a few minutes and shows 'No Signal'

  Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

  PC configuration-

  Intel Core 2 Duo 4500 @ 2.20 Ghz processor
  ASUS P5QPL-AM motherboard
  3 GB RAM
  No (not sure, maybe integrated) graphics card
  1 TB harddrive

  PS - I couldn't find an exact category for my problem.

  Hey Archer
  Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

  Hi sunny

  It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
  To make troubleshooting a
  1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
  2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
  3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
  4. Firstly check the display port... does it feel loose?
  a. do you have this port pins come out?
  b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
  c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
  d. then ofcourcse obviously... Reinstall the Rams and other external devices.
  Follow these steps and let me know your comments for each