History of the reset using the reference of table standings

Similar Questions

• History of clear waveform using the reference

  Hello

  I would like to clean up the history of the wave I have in my hand Vi. I'm passing his reference to a sub - VI. I'm not able to find ownership of historical data among the other properties of the property node. Behold that I have:

  

  Thank you.

  -H.

  And I think that your graphic reference is wrong. Have you copied the reference of the hand? In your hand, you have connected a data type? Since it has a variety of data that can be wired, you must do this so the history is the correct data type.

  And what you're trying to do with the True constant wired for all at the end of the Terminal loop? The loop only runs once.

• Say I have use a bookmark to access a web page. Subsequently I have manually delete the reference on historical Panel - also removes the current bookmark. Never happened with vn!

  Sequence of operations leading to the problem:

  !) Existing bookmark to go to the requested web page.
  (2) later, the I delete manually the reference panel historical at this bookmark - command 'delete '.
  Search 3) via the bookmark panel list some time later, I noticed that the bookmark I would have used previously was deleted. I did not went to the Bookmarks panel and deleted explicitly point. The deletion is certainly due to him removing point of reference in the history panel.

  This behavior started recently - and I think with FF for Android exit 31 or 32. Certainly is not happened with versions before clearing the historic bar on historic Panel were introduced. I am now on version 32.0.3

  Question being entered on desktop machine so 'guessed' version info irrelevant, so I've manually entered version info, etc. below...
  

  Thank you, Rob.

  HI dislexic_wobmat,

  It seems that this problem is fixed in the next version of Firefox beta.

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• Disabled IPad can be reset using the recovery mode

  Someone with a good it knowledge doctored iPad without permission and now it can be reset using the recovery mode. While that plugged into iTunes, software downloads, iPad, then displays the Apple symbol but then returns the message "iPad is disabled connect to iTunes".

  Hi stephen158,

  I understand that, in the process of restoration of an iPad in recovery mode, your iPad rebooted and returns to the screen "connect to iTunes". This can occur if the software download takes longer than 15 minutes, how the iPad will exit Recovery mode and the software will continue to download. In this case, you should be able to put the iPad in recovery mode and choose to restore the device when prompted.

  1. Connect your device to your computer and open iTunes. If you don't have a computer, borrow one from a friend or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo. Keep until you see the screen in recovery mode now.
     
  3. When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device.
     If the download takes more than 15 minutes the device out of recovery mode, you must repeat these steps and choose restore instead of update when you return to this step.
     
  4. After the update or restore is complete, configure your device. If you have backed up your device with iTunes or iCloud and you need to restore your device in step 3, you may be able to restore from your backup during installation.

  If you are unable to update or restore your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201263

  See you soon!

• Cannot use the references in Subvi cluster (error 1055, invalid references)

  Hello

  I'm going through a lot of that through a cluster to a Subvi.

  The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.

  In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.

  What I am doing wrong?

  Attached you will find three files:

  The mainVI: Main.vi

  The Subvi: Single_Cam_RefBased.vi

  The def of the type for the cluster: RefClusterTypeDefinition.ctl

  Thanks in advance,

  Marcel

  SteveChandler wrote:

  The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.

  I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)

  COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...

  

• Bug found during the use of references to the control in subVis on Compact RIO?

  Hallo,

  I have a simple task. I want to read higher VI into a Subvi the real value of a control to a level. I want to solve this problem by using a reference to the control.

  I have attached a simplified program that shows this.

  But the problem is now. When I run the main VI on a cRIO-device, the indicator "DataByReference" is not updated with the actual value. Only when I opened during execution of the "RefMain.vi" too, then everything works fine.

  More strange thing is, when I run the VI of hand on the host PC, everything works well, also without having to open the "RefMain.vi" when executing.

  Someone at - it an explanation for this behavior?

  Thanks in advance!

  Bernd

  This isn't a bug.  See this explanation.

• Digital background color works do not when you use the reference

  Hello

  I am trying to use a reference to change the background color of a digital indicator in a Subvi.  The sub - VI strives to change a digital indicator, but when I use a reference to another (reference Numeric.vi) VI, instead of doing all the background, the color I want, only the outline is the color I want, with the rest in white (natural color).    Is there a way to avoid this?

  You must use the NumericText.TextColors.BG property instead.

  Felix

• Multiple copies of the functional global using vi references

  I have several producers acquisition in a global operation (a functional overall by the producer). These functional overall are identical except for the name. He would work to have only one functional global VI and get a separate reference for each producer? The corresponding consumer would have also used the appropriate reference to consume the data.

  The functional global contains an array of data that must be analyzed by the consumer. It is possible that the data table does not contain a complete set of data on a unique "store" by the producer operation. Of course, the consumer, is written to search for a complete data record before completing the processing of the file.

  Les__Bartel wrote:

  TST wrote:

  No matter that there is a better way, the answer to the question is Yes. The FGV must be reentrant and the reference you open must be re-entrant too and then you can use the CBR node to run the specific copy of the FGV.

  I thought that a reentrant vi would not maintain the State of the shift register not initialized by one call to the other.

  A reentrant VI will maintain the State of its shift uninitialized registers.  However, you must be very careful, how to do this.  You first need to make sure that it is set to allocate Clones.  What will happen in this situation, it is that each different place call you this sub - VI each will be a different clone.  This means that each call will have its own data.  The problem with this is that you cannot share the data between multiple instances and therefore multiple loops.  If you don't believe me, go play with mean it Point by Point VI.

  So what happens if you assign shared clones?  A big freakin mess '.  You will have no control over which clone called where, and there will be a major data corruption.

  This is why FGVs are almost always not reentrant.

• Get Null value online by using the reference line.

  Hi guys,.

  I get the null value of the line everytime I use the reference line. Here is my code.

  String rowReference = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);

  Line OARow = (OARow) am.findRowByRef (rowReference);

  System.out.println ("row" + Row);

  If (line! = null)

  {

  System.out.println ("Surfing");

  Object succObj = row.getAttribute ("INTERFACE_HEADER_ID");

  String succStr = succObj.toString ();

  throw new OAException ("" + succStr, OAException.INFORMATION);

  }

  Thank you

  I found workaround to get a current line like «($OA.» CURRENT. Id_interface)"as REFERENCE of the LINE does not work. I'm passing the parameter to my Textinputbean in the application of process method and by capturing the current values in the process of request form

  Treat the claim code

  Hashtable params = new Hashtable (1);

  params.put ("param1", pageName);

  Hashtable paramsWithBinds = new Hashtable (1);

  paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL (oamessage, "{$INTERFACE_HEADER_ID}" ""));

  updateIcon.setFireActionForSubmit ("updateRecord", params, paramsWithBinds, false, false);

  Process form Code

  If ('updateRecord".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))

  {

  System.out.println ("after" m "+ pageContext.getParameter ("param2")); / / give you current value as $OA. CURRENT. ID_INTERFACE

  }

• Problems in the history of the file use

  Recently, I encountered a problem with the software of the history of the Windows files, it will not back up my files. Error messages are: 1) not able to digitize libraries changes user and save the changes to configuration c:\users\name\appdata\local\microsoft\windows\filehistory\configuration\config and 2) directory file has been saved not because it was encrypted or insufficient permissions l: \system volume information-System. Just recently, I discovered that this problem has occurred since the end of last March. I tried many things to fix the problem but none work, and I know that I have not been quantified or changed the permissions for one of my files.

  Hi Marshall,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the history file.

  This issue would have occurred due to some corrupt files.

  I need some information.

  1. Did you changes to computer/file history settings prior to this problem?
  2. You get no matter what error code or error message when using historical files?

  I suggest to try the procedure described in the following Microsoft support Article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/what-something-goes-wrong-file-history

  Read the following article.

  http://Windows.Microsoft.com/en-us/Windows-8/how-use-file-history

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Could not use brush history because the State of the story doesn't have a corresponding channel Please HELP CS6

  Whenever I try to use my history brush, the error pops up and I have no idea why. If I try just to open a blank document and use the brush it does not give me this error and I can 'use' the brush, but nothing is displayed on the project. Anyway, so when this error happens im trying to do a project and say I put a leader (picture) in the project and it's the first thing I do. I place, then I sized the image down some. I'm then a new layer to use the brush to behind the image and then that's when I get the error. I have no idea what is wrong can someone please help me I'm desperate: (.)

  It drove me crazy too and I couldn't find anything on the Net or in all the tutorials on the Adobe site. The solution I found is extremely obscure - it seems that it is essential when you take the snapshot for the layer of story that you do not choose the default option in the snapshot dialog box that appears to allow you to name the snapshot. In this dialog box, use a "Comprehensive Document", instead, click on the arrow to select the option below that is 'Merged layers', then it worked like a charm. Good luck!

• Make the absolute displacement using central reference point

  I want to place a large number of images of varying proportions, using the central reference point at the same point in each page.  I played with the move, and he always seems to use the upper left point.  My reading of the literature suggests that I would get the same results with transformation.

  I realize that I could do the calculations to make the move, but hope I'm missing something and there is a much simpler way to do.

  Thanks in advance

  Jerry

  I finally just did the calculations - it doesn't seem like elegent as moving using the reference of the Center but it works.

  Here is a snippet of the code with the warning that 6.125 and 5.0 are hard-coded and they shouldn't really be OCD made me round up things...

  	XY = myObject.geometricBounds
  	height = xy (2) - xy (0)
  	width = xy (3) - xy (1)
  	x_position = round (6.125 - (width/2), 3)
  	y_position = round (5.0 - (height/2), 3)
  	myObject.move Array (x_position, y_position)

  Jerry

• Using cross-references in the index?

  I was wondering if there are any suggestions out there for using cross-references in the index.
  
  I don't think you use the option 'see also' is what I'm looking for; what I want to do is to create index with a cross next to them reference entries.
  
  I tried this by creating an entry index and typing (see "another name of the topic") next to it, but when I compiled the project that this index entry has not been included because I do not have a subject entrusted to him.
  
  Is it possible to create an index entry of reference without an assignment of subject? Or are there other workaround solutions that you use?

  Index of cross-references are designed to allow you to have keywords in the index when you click on redirect the user to another keyword. For example I use for acronyms to redirect users to the long version. You are subject cross references within the project? If so, you may not use the index of references by indexing the same way? If the cross-reference you want is outside the project, using the index is not the way I would say. Why not use a link in a topic to a URL, file, etc. You may be able to do what you want with a redirection topic, but I haven't looked into this. Come back with more details if I leave the brand.

• How can I delete the history on the ACTIVITY APP?

  History on the application of the activity can be deleted?

  Hello

  To delete all the app activity history (including outcomes), follow the steps below.

  Note that this process involves the permanent loss of any sensitive data on your iPhone and Apple Watch, including health data, data HomeKit and saved passwords.

  • Cancel the twinning of your watch to your iPhone using the Watch app (it also refreshes the backup from the night before):
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > Apple Watch > press the 'i' icon next to your watch > désapparier Apple Watch.
  • Do a UNencrypted backup of your iPhone:
    • This must be done only via iTunes on a computer (for iCloud backups are encrypted);
    • Do not select the option to encrypt the backup of the iPhone;
    • How to back up your device using iCloud or iTunes - Apple Support
  • Erase content and settings on your iPhone:
    • iPhone: settings > general > reset > erase all content and settings.
  • Restore your iPhone to the unencrypted backup:
    • Restore your device from an iCloud or iTunes backup - Apple Support
  • Pair your watch once again, by choosing to restore (backup restore) when offered the option then to implement:
    • Set up your Apple Watch - Apple Support