Problems in the history of the file use

Similar Questions

• Question about problem with the file using a clipping mask

  I use Photoshop CS6.  I bought a digital frame with a mask of clipping on Etsy.   When I go to insert the image in the image using the clipping mask image continues to show through the edges of the image (as pictured).  I tried blocking layer, but it does not work.  Any suggestions?

  Try this, 2 layer moving below 3 attach them.

  Hang out with the selection tool ellipse a circle that encompasses the area which should show the image

  Create a mask for the form (make sure the shape layer is selected {now layer 2 to 3} click the icon at the bottom of the layers panel that looks like a circle inside a square)

  You should now see your image.

  If you get stuck, you can capture your screen to show your progress.

  Tips for the selection tool:

  You can hold the SHIFT key to constrain to a circle

  You can hold the ALT key to draw a selection of its center circle,

  You can hold both modifier key for a perfect circle drawn in the Center.

  Finally you can hold down the SPACEBAR to move the selection before you release the mouse button.

• Windows media player encountered a problem burning the file on the disk

  What does that mean? Im trying to burn music to a disk and keep getting this msg... HELP... windows media player encountered a problem burning the file on the disk

  Hi michealarthur,

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. Select a recording speed (write) more slow for the CD burner.

  3. try a different brand of blank discs.

  4. stop all other programs that are running.

  5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  6. defragment your hard drive.

  7. make sure that the hard drive does not use disk compression.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Also...

  You can try this procedure to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turn on / off Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Can I add date to name the file using burst

  Hi all
  
  I know that we can add the date to the file using %y and %m %d for
  
  E-mail
  AT·
  WEBDAV
  
  But is it possible to add the date to the file name if I'm bursting my file to a shared location.
  
  I tried this %y and %m %d but it does not work for explosion.
  
  Please answer
  
  Thank you
  Ronny

  Raise an SR to support this for the file option
  and
  To work around this problem, change your query bursting enrollment, to_char (sysdate, 'DDMMYYY') for the day, month and year, inorder to add to the file name component.

• Problem in the export using the QUERY functionality

  Problem in the export using the QUERY functionality
  
  
  I'm trying to export some rows in a table using the query functionality
  and I have some errors... I'm using the syntax is
  
  system@orcl QUERY = scott.emp expdp: '"WHERE emp_no = 123455" '
  DIRECTORY = data_pump_dir DUMPFILE = data_pump.dmp
  LOGFILE = data_pump_12345.log INDEX = n
  
  Can someone tell me please the problem with that statement
  
  I also tried to use the simple export
  
  exp file system@orcl = orcl_export.dmp log = orcl_export.log
  tables = Scott.EMP index = QUERY = n------"WHERE emp_no\ = 123455\"
  
  and this error
  
  EXP-00008: ORACLE error 904
  ORA-00904: identify invalid
  
  My os is Solaris
  Please let me know what the problem

  Hello

  Try to create parfile and use that, otherwise, you will need to escape each clause correctly to run exp or expdp successfully.

  test.par

  tables=emp
  query="WHERE emp_no=123455"
  
  or
  tables=myobjects
  query="WHERE owner='SYS'"
  
  $> exp username/password parfile=test.par
  
  Export: Release 10.2.0.1.0 - Production on Thu Mar 19 10:17:48 2009
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining Scoring Engine options
  Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
  
  About to export specified tables via Conventional Path ...
  . . exporting table                      MYOBJECTS      22650 rows exported
  Export terminated successfully without warnings.
  

  Concerning

  Published by: OrionNet on March 19, 2009 10:21

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

  8007007E tips

  There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

  I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  Who help me?

  If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

  http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

• How to add programs to the start of the file using Vista

  How to add programs to the start of the file using Vista

  Hi Harry,.

  Oddly enough, you can actually do it in msconfig except if it is already there and simply not checked as opposed to not being do not at all (although you would think that they would understand this option).

  The easiest way is to add the program (or a shortcut to the program) in the folder all Menu Programs Startup.   Here is the procedure: http://www.ehow.com/how_5098465_add-startup-programs.html.  Remember, to do this, you must either a shortcut existing (perhaps on the desktop or elsewhere in the menu all programs) or you need to find the source file (probably somewhere in C:\Program Files depending on what you want to add) and either copy it and add it to the startup folder or right-click on it and create a shortcut to copy into the startup folder.  Once you reboot, this program starts during the initial commissioning process and you will now be able to control using msconfig.exe, if you wish.

  Another option is to do this by using the registry editor.  If you decide to try this, first create a restore AND system restoration point backup of the registry before you begin.  Here is the procedure: http://www.ehow.com/how_7304438_add-program-msconfig-regedit.html.  I recommend to use this ONLY if the previous procedure does not work for some reason any as long as that the procedure is simpler and safer.

  If you want a simpler way to manage and control startup programs, you can try it free WinPatrol http://www.winpatrol.com/download.html that change monitors for startup programs if you set it to run in real-time so that you know when to try new programs are added to your Start menu and, for the purposes of this question includes an Add button which opens a link to a window of Windows Explorer where you can browse the program you want to add, click open to select and then add it directly to the commissioning.  If you prefer it does not work all the time, you can simply uncheck the box which includes this program and it will work only when you choose to run (but at the start, will work as an indication otherwise or configured).  It will appear not in the start menu in all programs (Finally, WinPatrol is, but not programs, it adds to the start), but it will appear in WinPatrol (which also lets you manage what you want or not start with checkboxes as in msconfig) and sure in msconfig - but only after a reboot is complete the process of adding.

  I hope this helps.  Personally, I use WinPatrol myself and let it run in real time.  Since I do a lot of installations, it helped me often prevent the addition of a startup item I haven't really need and reduces how many times I actually need to check what is happening out there.

  If this answers your question without the need to repost in another forum, please mark it as an answer.  If this isn't the case, then of course you must republish as suggested above.

  Good luck!

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• How to get a list of paths for all the files used in a project

  I have a CC Pro first project that has a large number of bins.  A sequence in one of these bins uses files of the other tanks.  I'll try to find the locations of all of the files used in the project.

  (1) obviously I can select each item in the timeline and display in the finder, but there are a lot of clips

  (2) the use of the video associated with each file in the project would help.  However

  1. I have not found a way to display only the clips that have the use of the video if all locations have not been developed.

  2. use video shows its use for all sequences, so it should be manually checked traction towards the bottom for each file see if it is used in the sequence in question.

  (3) I tried to export the project to the final cut pro xml.  The url path gives me the information I need.  For some reason, however, when I do the single export item information are here, not the information for all the other elements of the project.

  (4) I got tired of export for speedgrade, and all file names are there.  However, the railways are not.

  Basically, I want to find all the files in the project and transfer them to a specific folder for this project.  There must be a way to do this, but I'm not...

  You can import the sequence in a new project and then use the project manager to make them all together.

• create the file using flex

  Hello

  I work in flex.

  I want to create the file using flex 4.

  I use this code

  private var file:File;

  private function addfolder (): void

  {

  file = new File ("file:///C:/MyNewFolder");

  file.createDirectory ();

  }

  the error is

  Type was not found or was not a compilation constant: file.

  anyone helpme

  concerning

  Athi

  Hello

  With flex, you need to display the filereference function record. Because of the security sandbox you cannot programmatically save files or create folders, you need to open a box to browse to windows files, so the user can create a folder or save a file.

  private void testme (): void

  {

  var fi: FileReference = new FileReference();

  fi. Save ('Hello');<=== this="" would="" open="" a="" system="" file="" save="">

  }

  David.

• I use windows xp, I have a problem of the file conversion vlc m4as in mp3 and download videos from the net...

  I use windows xp.  I can't convert the m4as vlc mp3 files, or similar, so that i can burn it to disc and sync with my portable mp3 player.  Also, I would like to download videos on the net, how do I do this safely? (I recently downloaded some malicious programs).  A simple step-by-step guide would be appreciated.  Thank you very much.

  I use windows xp.  I can't convert the m4as vlc mp3 files, or similar, so that i can burn it to disc and sync with my portable mp3 player.  Also, I would like to download videos on the net, how do I do this safely? (I recently downloaded some malicious programs).  A simple step-by-step guide would be appreciated.  Thank you very much.

  ========================================
  You * still * trying their luck downloading media
  files on the net... I don't think it's impossible to guarantee
  that no problem will occur.

  That said... the following free software may be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your audio files on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your audio files are imported into Freemake,
  On the left, click the MP3 icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  This should make 23 for a downloader...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Video Downloader
  http://www.Freemake.com/free_video_downloader/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake - how to download the video for free
  http://www.Freemake.com/how_to/how_to_download_video_free

  Freemake - how to download TV shows online
  http://www.Freemake.com/how_to/how_to_download_online_tv_shows

• Having a problem to recognize the file using the utl_file package...

  Hello
  
  I use utl_file utility to read the CSV file, utl_file.fopen function is useed to open the file. The fopen function has three input parameters, the second parameter is the name of the file. My problem is that I need to read file on a daily basis. The file name will be like:-DDMMYYYYHHMISS. Last six characters are for the hour minute second generational file. If the name has only DDMMYYYY then I can give the name of file as TO_CHAR(SYADATE,'DDMMYYYY'), for an individual the same date throughout the day. But the hours, minutes and seconds will be time when the file is generated, it can be different for different days. In this case how can I normalize the value for the filename parameter in the function fopen.
  
  Thanks in advance.

  Similar to the jeenesh solution:

  declare
   fexists boolean;
   fname varchar2(20) := to_char(trunc(sysdate),'DDMMRRRR');
   ......
  begin
   . ...
     for i in 1..24*3600 loop
       utl_file.fgetattr(location,filename || to_char(to_date(i-1,'sssss'),'HHMISS'),fexists,file_length,block_size);
       if fexists then fname = fname || to_char(to_date(i-1,'sssss'),'HHMISS'); exit; end
    end loop;
  .... --- now you can open the file with above found filename
  
  end;
  /
  

• Problems importing the files from an SD card to iMovie

  After I have import files from an SD card to version 10.1.1 iMovie I have a problem when I eject the SD card then some of the files show just like a question mark (?) and some of the files are saved. I've never had this happen before that I can remember. I was just curious to know if maybe I do some thing wrong, or if there is a problem with iMovie.

  ! 0.11.4 OSX El Capitan.

  iMac late 2012

  Looks like you may have ejected from the SD card until all files have been copied to iMovie.  In fact I never use import to all but drag and drop files directly from the SD card mounted to an iMovie event.  This way an id that the files were transferred.

  Geoff.