hitTestObject with several bays

Hello!

I made a game and have a few problems

I want to do a hitTestObject between several bays, I tried something like this:

for (var i: Number = 0; i < array1.length; i ++)

{

array array1 [i] there-= 10; Moves an object to the top

for (var a: number = 0; i < array2.length; a ++)

{

If (array1 [i] .hitTestObject (array2 [i]))

{

trace ("hit!");

}

}

}

When I run it, something which will detect the collision and will display 'hit', but some who will ignore. I also noticed that some opposes in array1 stop running the code for moving (array1 [i] there-= 10) after I added another picture.

My question is: is at - it a more efficient way to do this? Or at least a way so that everything works fine

Thanks in advance!

There is a more correct way to do it... No I have

If (array1 [i] .hitTestObject ([a] array2))

Tags: Adobe Animate

Similar Questions

  • Get the table to an XML file with several bays

    Hello

    So I was faced with this program I have for the past few months but I'm almost there. I have a program that creates several berries and place one after the other in an xml file, and each table has its unique name. Now, I would create a VI that takes this XML file and when the user enters the name of the table specific they are seeking it goes into the xml file concludes the table in its entirety under this name and displays in an indicator of output to be read on the VI. A sample of my xml file and the VI that creates this xml file is attached.

    Thank you

    dlovell

    Something like this should work for you.

  • Save several bays of nested loops

    Hello

    My vi generates several bays in each iteration of the loop, and I would like to save the data. I did work with the files before recording, but it's never with nested loops. I don't know how to keep the information of the iteration of one loop at the other. I would like suggestions. I made this sample & simple vi (attached file) that simulates the question I have. I have a file with a time column and different columns of food beside him.

    The first question I have is that I generate the time table only once, but a table of signal several times, so how can I keep the time table to drop several times? The other question, as stated above, saves the data in the table signal getting lost in the nested loops...

    Thank you

    A

    1. the first element of the first matrix signal IS always zero.  The Signal to simulate always starts at zero.  You compare it to the indicator of "first date".  Who got by converting the dynamic data type to a scalar.  And it's always the last element of the actual data.  And since the "first out" is replaced with each iteration of the inner loop, the number you see at the end is actually the latest iteration of the data.  Look at "First release" in comparison with the last element of your last column of the table and you will see they are the same.

    2. the reason why you have a first column that consists of the steps is because that's what you have wired to initialize the shift register.  If you look at my example, you will see that I have an empty array.  (The zero is gray.)  You, the 0 is not dimmed meaning there is an element.  Expand this table to view more items and expand the digital field and you will see more digits.  They correspond to what is in your first column.

  • Installation with several NetAPP SRA spinning FAS30XX

    We tested SRM successfully between FAS3050 and FAS3070. Now, we are in the second phase and test the scenario where our VM is distributed between several volume and multiple files (all NetApp FAS30XX) server. My question is how can I configure a replication with several spinning to a file server? Because when configure us SRA adapter we provide source IP which is protected site spin, then IP who resumed recovery site go and then we're able to see replicated table. But in the situation where you have several sources how can SRA will be set?

    Thanks for your response

    When you set up picture frames, you can specify more than one table, then you could add essentially several bays that are replicated volumes in a different destination file server and if reporters are operational in a metro cluster or a cluster, you must the failover in case a file server.

    I hope this helps.

  • Shortcut for the new window with several tabs

    Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

    Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

    In reply to myself... withdrawal-order new window (and-new-tab), now it works.

    Looks like I'm too complicated it.

    shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

  • Functions defined by the user with several parameters

    I set features three following user using "Define."

    UF1 takes a single patameter;

    UF2 takes two parameters;

    and UFX takes two parameters - with the second is 'X' in the definition.

    Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

    F3, a function of two user settings, produces a graph of NaN.

    F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

    F5 produces a graph of NaN.

    F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

    Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

    Hi!, Fortin:

    If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

  • Background with several pictures

    How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

    (El Capitan, iOS 9.2.1 Photos)

    To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

    The themes of the book are different according to the terms of the photos and the number of photos per page.

    It's the theme travel plans:

    If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

  • WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

    Hello

    We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

    Both have the same SSID and password and are set to different channels.

    My HP ENVY 4500 fails to connect when the Access Point is lit.

    It will connect with it.

    Once connected, I can turn on the PA and all is well.

    The two router an AP using WPA-PSK/WPA2-PSK encriptación

    The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

    Any thoughts people?

    Eserim

    I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

  • Carpet * a DVD-Ram UJ - 841S comes with several error messages

    My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

    I also can't rip music discs.

    Can you see ODD listed in Device Manager, and if so what is the exact status it?

    Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

    Please more information!

  • Interfacing with several unknown USB devices; all producing NMEA strings

    Hi all

    Question about the peripheral USB interface and their associated drivers.

    I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

    Is it possible to produce one driver who will accept any USB device strings?

    Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

    I had a trawl of the forums, but I've not found anything that specific.

    Thanks, I really appreciate the help.

    About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

    I am not expecting an all-in-one solution but asked the question in case it was possible.

    What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

    LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

    I appreciate any help and I think I got the answer I was looking for! Thank you very much

  • Closure of a state machine in queue event with several parallel loops

    I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

    I look forward to any comments on my as well code, if someone is willing to offer it.

    My program needs:

    If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

    Architectural details:

    The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

    During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

    In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

    HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

    I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

    I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

    Thank you!

    First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

  • Slide with several digital poster Down filter event Bug button?

    A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

    A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

    A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

    It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

    A vi and a printscreen are attached.

    The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

    Or someone has a better solution and explanation?

  • problem with several graph XY axes

    Hallo,

    I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

    the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

    any ideas?

    Thank you in advance,

    Thodoros

    Try the following movements:

    Right-click-> popup menu-> advanced-> reset scale layout

  • HP Officejet 6500 a how to scan a document with several pages in a single file?

    HP Officejet 6500 a Plus e-All-in-One - E710n

    Windows 7 (64-bit)

    How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

    This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

    Hi mpw101,

    You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?

  • I'm stuck with several GB of music files on my phone and I can't get down them!

    The other day I tried to install an application on my phone, but I didn't have enough memory.  My phone is full of music via iTunes synchronisation dock. So I connected it to my computer to try to make some more room. But there is a problem.

    (1) Apple does not play nice with Palm. Synchronization is no longer permissible or possible. I can't use iTunes to manage/delete music.

    (2) in USB Mode, there is no way to access/view the library. It's just not there.

    I tried Palm support, and they confirmed that the USB Mode is not working. I guess that the library is located in a hidden folder or directory. They suggested that I downgrade my iTunes. Goal that is unacceptable to me because one) it forces me to break the license Apple, b) it is not taken in charge, and c) if there is still a remote chance it will mess up my iTunes library, I won't.

    I'm ready to get off at Palm headquarters and throw my phone to their building.

    Can someone tell me how to delete my library without hacking iTunes?

    I thought about it. Support, put this in your KB. Everyone who was sync via iTunes on a Mac is currently STUCK with several GB of music on their phone that they cannot manage or remove, which makes the Palm Pre a lot less useful than announced.

    USB mode is a waste of time for people on a Mac. These hidden files are never going to be visible, and the library cannot be removed. The solution: go through a PC. Anywhere, any PC will do. Connect your phone to the PC, go to the USB drive Mode and show hidden files, then delete them from there.

    I got an old laptop lying around at the bottom, and the problem was solved lickety split.

Maybe you are looking for

  • Universal Clipboard works only one way

    Hello I have a MacBook Pro running Mac OS Sierra and an iPhone 5 iOS running 10 of the retina Universal Clipboard does work for my Mac to my iPhone. When you try to copy stuff from my iPhone Mac does not seem to be able to paste them. I checked the t

  • Where is the frigin toolbar in firefox mobile?

    How can you us HELLO on their cell phones if the stupid button cannot be installed?Very frustrating.DON

  • Unknown battery - not charging on Satellite P300D-11U

    HI -. I have a Satellite P300D-11U I have now bought 3 xtra different batteries. None of them will work - labtop doesn't recogninze any of them.Only the original supplied with the computer. When activated, it says Remaning time battery unknown / unde

  • Quebec City an archivo AWV

    Como puedo bajar UN archivo AWV quality?  Yo lo hacía entering a HOME, PROGRAMAS, ACCESORIO, RECORDER OF SONIDOS Y EN ARCHIVO PROPIEDADES Y lo hacía

  • OfficeJet 7610 Printer Wizard option disappears from the list of options

    After having initially installing my 7610, clicking the printer from devices and printers would bring a window with an image of the printer up and four options - Assistant printer, see what's printing, set preferences, and customize your printer. Tod