Hoe to record a schema target using OMB +.

Similar Questions

• Add records in the target table

  Hi all
  I HAV done an interface for a simple source data transfer to the target. When I run it, the records are stored in the target table. Now, I want to launch the interface (for the same or different source table) and add the records to existing records in the target table.
  
  Kindly guide me, explaining how shud I do the addition in the target table.
  
  Thanks in advance.

  Hello

  You can use the IKM control add... it will add records...

  Thank you.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Source target receives more records, then the target Source

  Hi all

  I am facing a problem in an interface and don't know why it's happening.

  In my table target 'TBL_X', I have 100 records and table target 'TBL_Y', I'm 130 records! When I also 100 records to the target.

  My target table is a fact table and my IKM is 'SQL control Apend' because the target I won't have a update, simply insert.

  In my interface there are four research to collect the ID of Dim tables.

  But I do not know why more records I have the source.

  Do you have a person were faced with this or a similar problem?

  Concerning

  Thank you

  My first impressions are that you entered twice in your lookup tables of dimension for the same value of research. I would check that first because it will probably be following your criteria to join in one or more of the tables you have found the issue.

• How to change the password of a schema by using Oracle SQL Developer

  Hi need to change the password of a schema by using Oracle SQL Developer, how can I do?

  or maybe http://www.thatjeffsmith.com/archive/2012/11/resetting-your-oracle-user-password-with-sql-developer/

• Inserting a new record in the database using a form empty ADF

  Hello
  
  I'm trying to insert a new record into the database using a form.
  
  I have an Employee table and its corresponding entity object and the view object. The table has an id that is used as the primary key and is filled using a sequence in the comic book.
  
  Data controls, I dragged and dropped at the sight of the employee as a form of ADF and checked the submit button include. Then I dragged and dropped the validation on submit button operation.
  
  When I connect to the app and go to the page used to create, I have 2 problems:
  1 - the form is filled with the logged in user info.
  2. If I try to change the news and validation, the user info is changed in the database and no new record is created.
  
  It makes a little sense to me, but I would like to know if there is a way around it (get an empty form and insert a new record).
  NB: the employee id is not part of the form, I want to be filled using the sequence.
  
  Kind regards
  MB

  User, please tell us your jdev version!

  To do this, you must create a new record before going to the display of the form page. In a stubborn workflow (btf), you drag the operation createInsert of the VO on the btf and it will generate a link method, add a view to the btf and put a navigation of the binding of the method of the page. Mark the method as 'Activity by default'. Now, ren, you call the workflow, you create a new record that will show your blank form.

  Timo

• Insert multiple records in a database using the DB adapter and stored procedure

  Hi all
  
  I want to insert multiple records in a database using a stored procedure. I wanted to insert these records using a data adapter and data adapter must be called by a mediator.
  
  Can anyone suggest me some ideas if it's possible with capabtilities OOB in SOA suite or not?
  
  Thank you for your help in advance.
  
  Thank you
  Shiv

  The trick is in the stored procedure. You must use a data type that will handle multiple records I use varray. An example can be found in this post.

  Re: Mutiple calls to AppsAdapter (pl/sql) when the payload has multiple records

  When you read the procedure stored in the db adapter wizard looks and xsd / xml if you have maps accordingly.

  see you soon
  James

• the schema is used more

  I'm working on oracle 10g on Linux platform. RAM is 4 b
  I had 10 schema supposely I said 1 to 10. Is is possible to check, from 1 to 10, the schema is used more

  What is the purpose of these reports?

  You might want to know more accessible objects like tables etc.

  Check also:

  Request for frequently used tables?

• How to change the join of a Carpenter using OMB condition

  Hello
  I am new to OMB, can someone give me an example of a Carpenter using OMB modifing join condition.
  
  Thank you
  Richards

  MAPPING OF THE OMBALTER 'MAPPING_NAME' CHANGE THE VALUES OF PROPERTIES (CONDITION_DE_JOINTURE) "JOINER_NAME" OPERATOR ('PUT YOUR JOIN CONDITIONS HERE')

• Need to find all tables in the target using indicators of loading time APPEND and PARALLEL

  Nice day
  
  Value your machines Way-Back version 10.1.0.4 for a matter of scheme.
  
  I am trying to identify all the target tables that are currently defined using APPEND it and PARALLEL loading tips. This is the default setting but is not the optimal method in all cases. With several developers who have developed cards for years, most with little background or training, we try to do a bit of cleanup and optimization.
  
  With about 900 cards it is not possible to do this manually, so I was hoping that someone who has used this old version remember where this information is stored in the old structure of repository.
  
  Thank you very much!!
  
  -gary

  Start OMB * more. And then

  OMBCONNECT...
  OMBCC ' /'
  the value of mods [OMBLIST ORACLE_MODULES]
  foreach $mods {} mod
  OMBCC ' /.
  define tabs [OMBLIST TABLES]
  foreach $tabs {} tab
  puts "$tab [OMBRETRIEVE TABLE '$tab' (PARALLEL_ACCESS_MODE) GET PROPERTIES]"
  }
  playing cards [OMBLIST MAPPINGS]
  foreach map $maps {}
  Set mtabs [OMBRETRIEVE MAPPING "$map" GET of OPERATORS of TABLE]
  foreach mtab $mtabs {}
  puts "$map $mtab [PROPERTIES of OMBRETRIEVE MAPPING"$map"OPERATOR"$mtab"GET (LOADING_HINT)]"
  }
  }
  }

  Kind regards
  Jaap.

• Size of scheme of dba_segments differ the soucre schema & target after impdp.

  Hello Experts-

  I'm a bit confused and I hope to get some clarification as why diagram sizes are different once the schema has been exported and imported into another data base (Oracle 11.2.0.3 on HP - UX 64-bit).

  Source Schema (USERS1): 188.067932.

  Target Schema (USERS1_TEST): 140.85.

  The script that is used for the above calculations:

  select owner,sum(bytes)/1024/1024/1024 schema_size_gig
  from dba_segments group by owner;
  
  

  Expdp Parfile:

  DUMPFILE="EXPDP_%u.dmp"
  LOGFILE="EXPDP.log"
  DIRECTORY=EXPORT_DIR
  PARALLEL=6
  COMPRESSION=ALL
  REUSE_DUMPFILES=YES
  SCHEMAS=('HR_INFO', 'USERS1')
  

  Impdp Parfile:

  DUMPFILE="EXPDP_%u.dmp"
  LOGFILE="impdp.log"
  DIRECTORY=EXPORT_DIR
  STREAMS_CONFIGURATION=n
  TABLE_EXISTS_ACTION=SKIP
  SKIP_UNUSABLE_INDEXES=y
  CONTENT=ALL
  PARTITION_OPTIONS=none
  PARALLEL=12
  REMAP_SCHEMA='USERS1:USERS1_TEST'
  SCHEMAS=('USERS1')
  

  The import is missing something from the schema of the source?

  885068 wrote:

  Hello Experts-

  I'm a bit confused and I hope to get some clarification as why diagram sizes are different once the schema has exported & imported into another data base (Oracle 11.2.0.3 on HP - UX 64-bit).

  Source Schema (USERS1): 188.067932.

  Target Schema (USERS1_TEST): 140.85.

  The script that is used for the above calculations:

  1. Select the owner, sum (bytes) / 1024/1024/1024 schema_size_gig
  2. dba_segments group owner;

  Expdp Parfile:

  1. DUMPFILE="EXPDP_%u.dmp".
  2. LOGFILE = "EXPDP.log"
  3. DIRECTORY = EXPORT_DIR
  4. PARALLEL = 6
  5. COMPRESSION = ALL
  6. REUSE_DUMPFILES = YES
  7. PATTERNS = ('HR_INFO', 'USERS1')

  Impdp Parfile:

  1. DUMPFILE="EXPDP_%u.dmp".
  2. LOGFILE = "Impdp.log"
  3. DIRECTORY = EXPORT_DIR
  4. STREAMS_CONFIGURATION = n
  5. TABLE_EXISTS_ACTION = JUMP
  6. SKIP_UNUSABLE_INDEXES = y
  7. CONTENT = ALL
  8. Partition_options = none
  9. PARALLEL = 12
  10. REMAP_SCHEMA = "USERS1:USERS1_TEST".
  11. PATTERNS = ('USERS1')

  The import is missing something from the schema of the source?

  I guess that is missing the allocated but unused extensions in the source schema.

• Some sort of mapping data to the account target using FDM as

  In my chart of accounts, I have a wildcard character is mapped to SGA_ *.

  I want to map the target HFM for imported data account. Is it possible to achieve this FDM in?

  Cannot use Logic Accs Drillback required.

  SGA_12345 > 10000

  SGA_45678 > 10100

  You can use logic accounts for duplicate data sources. Then, you can map the accounts of logic.

  Another option is import scripts to generate additional documents.

  Are you interested in dealing with the two records (original and generated)?

  If you are only interested in the product, then you can simply add a prefix when importing the data.

  Concerning

• How will I know which encryption scheme is used for a partially encrypted connection?

  When you access a site that contains unencrypted items, technical details by just looking at says "Connection partially encrypted". Although it is useful to identify it, is what I would really like to know which encryption scheme is actually used for the encrypted page elements. Is there a way to do it, and, otherwise, it would be something that could be considered as a feature?

  The images show joined the difference in the information available for encrypted partially connections.

  It will be possible to inspect this information via the "network monitor" in the development tools of firefox in a next version of the browser (on firefox dev edition which is already implemented).

• Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?

  Hello.

  I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
  So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
  Thank you

  I already tried on S - video In and I get black screen

  More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.

  Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.

  All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.

  With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.

• Fact film GoPro 17sec and now cannot delete 2 hours cause records he says be used? I just want to keep the movie not all the extras.

  I want to know how to remove all these records without value shows saved on my macbook and just keep the 17sec movie I recorded on my computer I made in the studios of the GoPro. Trash can said that I can't cause its used. So I have to save the record with my phone and then erase everything? Seems silly and wouldn't look professional record the computer screen, but I will if I have to, so I fill my computer with video of pure filler.

  Leave the Photos, if the items from the trash are no longer used.

  To empty the Recycle Bin, and then try again.  If the items are still in use, restart the Mac, then try again.

  That have you tried exactly to remove? Only video clips?