Horizon 6.2 to 7 Upgrade issue with the Admin page

Hello

I installed my view Horizon 6.2-7 environment. Upgrades seemed well my server my connection to two servers and composer. However when I try to connect to the Admin page it is just a blue screen shows white guard goes round and round. Someone at - he seen this yet?

Thank you.

Have you tried VMware KB: accessing the page administrator display Horizon shows an error window empty Horizon 7 ?

Tags: VMware

Similar Questions

  • Are there known issues with the help of Dreamweaver CS6 on Yosemite?

    Are there known issues with the help of Dreamweaver CS6 on Yosemite? I am considering an upgrade of the Mavericks.

    I don't think so I am still using DWCS4 on Yosemite and it runs like a dream, so I think that DWCS6 would be.

  • problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

    problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

    See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

  • How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    It is hopelessly outdated. It is simply not compatible.

    Mylenium

  • Are there known issues with the decommissioning of a folio to v20 v24 in CS6?

    Are there known issues with the decommissioning of an app to v20 in CS6?

    our application is v20, we have created the folio initially as v24 but could not get the corresponding app approved by apple, so we rebuilt the folio as a v20 but it errors on the download, ideas?

    You will need to completely recreate the folio.

    Bob

  • Activation of DLNA Scan with Tivos admin page expires

    I wanted to go and reset my ReadyNAS long running and stable to pass the time to backup my files of Tivo 02:00 to 15:00, I would be put in place for centuries on an old version of firmware.

    With 6.4.2 I rebooted and went, adjusted at the time, recorded the change and rebooted the NAS server.

    When he returned to the top, he says that the Tivo server is disabled, so I enabled it, clicked on save, let it scan for Tivos and it then disconnects the admin page and I can't log back in there because he's too busy.

    I've never seen this problem before, but I have also never do any work on the Tivo backup process from 6.4.2.

    Any ideas? as the unit is not to a point I would say even if the Tivo server and backups will run.

    dianebrat wrote:

    No,

    I consider not me having to go on my own and software version beta test as an "acceptable solution" as much as this issue was not mentioned in the release notes.

    I'll leave that question open up to 6.5 came out as a candidate of the final version.

    6.5 is released a few days ago.

  • with the master page "insert current page number" error when you export the book

    Using InDesign CS for Windows 5.5

    Recently updated for InDesign CS (very old one from 2003). I save a copy of all my old files version and kept the old installed ID just in case (after reading all the horror stories on here).

    In my old version of ID, I created a book consisting of some 70 documents. Some of these documents are a single page, while others have multiple pages. In the multiple documents page, I used the "insert... current page number" character (or whatever the command was in the old version) on a page master and formatted as follows, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book in pdf format, it worked fine. (I is not have to / want page numbers consecutive throughout the book, only in individual documents.) By that I mean my whole book is about 280 pages, but not all of these 280 pages are numbered, only groups of pages in multi-page documents. It is not read page 1-280).

    Am my upgrade to 5.5 a few months ago added some documents in the book, and (if I remember correctly) when I saved the book he asked to convert each document version to the new version, I said OK. When I exported the book in pdf format, some documents that are more than 2 pages are now counted wrong; the numbers are now like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Each page, but page 1 is now page 2 of that either.

    If I open the individual document and export it to PDF, the page numbers work very well. It is only when the document is exported with the book the page numbers to spoil. And it's not all documents in my book; This error starts to a particular document and continues from there throughout the rest of the book, affecting any document more than 2 pages. Documents several pages before that point in the book for export with the correct page numbers.

    I create new documents by performing a "save under" with a previously created document and cut and paste as needed, so I won't have to reformat or implement the page numbers on each new document. I use layers or styles (I do not know there is a better way to do what I need, but I didn't have time to learn the basics, just enough to be functional.)

    My attempts to resolve this problem so far (using version 5.5), tests with the first document where the error: (1) I have removed the document from the book, removed the page number character current insert, back to the current page number character insert, saved, the individual document exported in pdf format and it worked fine. Put it in the book, save, export, and it is bad. (2) I picked up the book document, export the document to .idml, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (3) I started to the top of my old version of ID, open from the previous version of this document, exported .inx, closed, open the .inx in ID 5.5, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (4) I moved the document to the top in the order book, put it on a document which correctly numbered pages, saved, exported to PDF and this document was still evil, but one who has been numbered correctly all along is still correct. (5) I compared the settings for this document to others that the number properly and found no difference.

    It's as if the page numbers get hooked on "2" when I export the book, but only in the last two-thirds of the book. Sorry this is so long, but I hope that this description of my problem is understandable. Any advice, other than to go back to my old version documents and start over?

    Thank you for your time and all the information great this forum provides.

    Alice

    Normally, I would say that this kind of problem is symptomatic of the incorrect numbering options in the book panel or an individual document or a bad update of the numbering, and those things are still definitely worth looking at.

    That said, I invite you to go to the original files, export each one to .inx and open those in CS5.5 and save as a new file .indd CS5.5 whose new name, then add them to a whole new book CS5.5. Books are pretty flakey without mixture in the conversion of files, and there are enough bad behvior file conversion directly inherited the .inx route is insurance a little success.

  • I used to be able to get on a site, but two days ago I can't either. I spoke with the Admin of the site and the site looks at me as non-legit, he said.

    I used to frequent a site RPing until two days earlier Sunday, January 26, 2014. After talking with the admin of the Site, I was told that the site is no longer recognized me as a person "legitimate." I passed through all the normal steps, updated, uninstall and reinstall Firefox, delete cookies and history, removed the proxy for the connection (and all other proxy options) and even by restarting the computer. I tried to access the site on other browsers, IE and Chrome and it works great! I still have other friends who can continue to use the site on Firefox! I don't know how to solve the problem, and I hate Chrome/IE with a passion, so I pray there is a way to solve this problem and I would like to use Firefox again for the site. Regarding the error I get whenever I try to access the site, it reads. "The requested URL '(Site address)' could not be found or is not available. Please check the spelling or try again later. »

    Create a new profile as a test to see if your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • T61 upgrade issues with T9300 cpu

    Hi all

    I have a T61 (7659) with a T7300 cpu and m/b No. 41W1487. Can I switch to a T9300 processor, using a connected bios?

    I tried once, but the computer is unstable. I suspect the second-hand T9300, I received is damaged.

    All m/bs Merom can * unofficially * accept the Penryn processors, with the exception of the BIOS boot message?

    Thank you very much.

    Welcome to the forum!

    I have installed T9300/9500 processors tips T61 with modded BIOS and have never encountered a problem. YMMV.

    Your likely culprit is the CPU.

    Good luck.

  • Uninstall old Oracle s/w after upgrade issue with uninstall utility

    Hello

    As Oracle recommends to use uninstall utility to remove the s/w Oracle and supports using YES/runInstaller. But I have a small question which became a little tricky for me...

    I'm afraid at this stage:

    Specify all headphones single instance that must be configured out [LISTENING]:

    As used listener is with the name LISTENER himself, and if I just come in the step above, it will stop/in-configures the new listening port used :-( It happened to me the last time.

    http://docs.Oracle.com/CD/E17984_01/doc.898/e22498/deinstall_db_em.htm

    Lines pasted from the above link: listener will be deleted like this I'm afraid:

    {code}

    Out another single Instance provisioning: LISTENER

    Listener configuration: LISTENER

    Stop listener: LISTENER

    WARNING: Could not stop the listener. Listener can not run.

    Remove listener: LISTENER

    Listener deleted successfully.

    Listener configured successfully.

    {code}

    I downloaded uninstall utility for version Linux_64 and software to remove is 11.2.0.2 on BSG - 64

    . / Uninstall - home /oracletempbackup/11.2.0/gridhome_1

    Please suggest to handle this step of the configuration of the listener.

    Thank you very much.

    P.S New forums interface is very pretty, but it will take time to get used to it... {Code} was very good option, I'm sure it will be the same, I use it wrong somehow :-)

    Best regards

    Rather than use the deinstall utility separated, I used the deinstall script the ORACLE_HOME I wanted to uninstall, and it worked fine.

    Not destroyed ORACLE_BASE, as he said, ORACLE_BASE won't be outside configured as 11.2.0.3 that oracle_home is running it.

    Secondly, in this sense, uninstall script did not ask the listener to be configured.

    Best regards

  • For those having issues with the iOS 9.3 update please read...

    Many people have problems with the update to iOS 9.3 and the issues are now flooding the iOS support forums. I hope that through the consolidation of some of the available information, that will help some of you not to mention hundreds of new threads asking all on the same things.

    Please do not shoot the Messenger if you already know all this. I'm just trying to help by providing information to the community. These problems are well known, Apple has recognized them and were reportedly working on a fix that should be out soon.

    Here are a few articles site technology explaining the problems if any of you are interested in reading them. They are in no particular order other than what my most recent Google search turned up for me.

    n-tapping-links-in-Safari-and-other-apps/ http://9to5mac.com/2016/03/27/some-users-Reporting-iPhone-Crashes-on-iOS-9-3-whe

    http://www.Forbes.com/sites/amitchowdhry/2016/03/24/Apple-iOS-9-3-is-causing-SER worried-ipad-problems.

    http://arstechnica.com/Apple/2016/03/Apple-pulls-iOS-9-3-update-for-older-device s-follows-activation-problems.

    ch-causes-new-software-to-make-older-iPhones-and-ipads-unusable-a6954791.html http://www.Independent.co.uk/Life-style/gadgets-and-Tech/News/iOS-93-Update-glit

    http://www.MacRumors.com/2016/03/25/Apple-ios93-iPad-2-update-bugs-remain/

    This contains some suggestions that may actually help some of you.

    http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

    Apple post these support articles a couple of days and they can help some of you as well

    If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

    If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

    If anything suggested works for you right now, you have to just be patient (remember this thing "Please do not shoot the Messenger ' from above) and wait for that Apple releases update to the fixed software.

    It is very good that Apple is "working on it", but in the meantime our devices are worthless other than for the game.  E-mail links are a VERY big problem for those of us on the road.

    That being said, you know a way to revert to a prior to the 9.0s1 software?

    Thank you for taking the time to post these links.  It is disappointing that Apple has these on their website.

  • Re: Windows 7 Upgrade came with the bad language!

    I have a Portege with Vista Business, Russian local. I ordered windows 7 Professional upgrade, but it came with the Greek regional settings. TOSHIBA Upgade language Russian and marked as RU, but Windows 7 Upgade disc recording is marked as EU2. All I know is there no option to change the regional settings in Windows 7 Pro. Now I have vista or win 7, as Portege comes with win Xp recovery disk. Your suggestions?

    Contact Toshiba still and explain the situation. I don't know that you can clarify this soon.

    By the way: why you don't have Vista now if you wrote in your first sentence don't have Portege with Vista Business?
    Continue to use this version of Vista until you get just Win7 upgrade disk.

  • WiFi issues with the new update

    I bought the new 4th generate Apple TV a month ago and yesterday he stopped to pick up my Wifi signal in my house. It worked completely fine for a month. I returned it to Best Buy because of this problem after checking the connection to my router, reset the modem, power cycling the Apple TV, etc..

    I just opened a brand new 4th generation Apple TV and it was quite good for 4 hours of work. I decided to check the latest updates and updates to the Apple TV. Once I've upgraded, he started to give me the same Wifi problems, that I had before.

    Apple TV cannot find my Wifi domain names or where they do not appear under networks, I get an error message telling me that I can't connect to my WiFi.

    I'm also having problems with my internet connection fall on me all of a sudden during streaming. I'm two bands ac Wifi 802.11 (2. 4 g and 5 G). There are times that I can connect to one and not the other. There are also moments where Apple TV can find one and not the other. And then there are moments where Apple TV can't find one or the other.

    This started to happen when I decided to update the new Apple TV out of the box.

    Everyone knows about this problem? Is that a way to factory reset Apple TV without it is updated during the process?

    Looks like a problem with the network

    You can get a diagnosis of istumbler, netstumbler or similar. Look for the strength of the signal, noise, networks nearby

    Entrust it to another network or Apple for testing

  • Pavilion dm4: Windows 10 upgrade fails with the message error "we couldn't update the system reserved partition."

    Both HP and Microsoft indicate my laptop was ready for the upgrade to Windows 10, but when I tried to do the upgrade there not - several times - with the error message of Microsoft that "we could not update the system reserved partition."

    What should do?

    Other threads of error indicate the system reserved partition must be larger.  This partition is usually small.  Try making at least 400 MB instead of the 100 MB to 250 MB it is probably now.

  • Windows 10 upgrade fails with the error C1900101-20006

    The current operating system is Windows 7 SP1.

    First test was about 6 months ago.

    At that time googling the error has not returned any hits at all.

    Hoping that the problem would resolve itself, or a kind of diagnostic information would become available I tried again today, but with the same result.

    I tried things like run the update utility and uninstall the virus check tool, but all the tests gave the same result.

    Is it possible that I can get more information about what is really causing the error, for example which driver is causing the problem?

    An additional piece of info is the error of update: is 0x80070005, which seems to be "access denied."

    The upgrade is already running as an administrator, and I run the SubInACL tool.

    Consider the following text:

    Retry the upgrade manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

Maybe you are looking for