Connected to earpiece/Headset Bluetooth earpiece

Similar Questions

• I get an error "" device cannot start (10) "" when I try to connect the stereo headset bluetooth Motorola SF600.

  I tried to pair my new Motorola SF600 bluetooth stereo headset so I could listen to and control Windows Media Player with my helmet. When I matched the device with the Microsoft Bluetooth driver has been installed, the service of the helmet was not available and troubleshoot message recommended that I upgrade to the Broadcom Widcomm driver. I followed all the instructions, downloaded the latest Widcomm driver and installed. Then I restarted the computer. I could see the Bluetooth icon in the taskbar, but it was red and not white (or blue). When I clicked it, it just says adapter lights up, I did. As soon as I hit this button, the bluetooth icon disappears and no bluetooth connection is possible. When I look in the bluetooth properties and the properties of the driver, I see the message "device cannot start (10). I searched all over the web a possible solution and the closest thing, I found was a fix article talking about a fix for bluetooth adapters that cannot start. I asked the fix and tried to apply it, but whenever I try to run it, it gives the message that it is not applicable to my computer. I wish you a few recommendations for how to fix this. Please let me know if you need more information about the devices or anything else. Bluetooth dongle is a mini Logitech BT which came bundled with the combo keyboard and mouse MX-5000. He is old enough, but he gave me always excellent service under Windows XP.

  Thank you.

  Dan

  Original title: Win7 won't let dongle BT start with the latest Broadcom Widcomm driver

  Thanks for the advice, but I came to the conclusion that Windows 7 does not support the advanced features of this particular Logitech Bluetooth adapter. Windows XP takes to load them entirely, but for some reason any Windows 7 isn't. From Logitech Web site States expressly that the Bluetooth adapter supplied with my keyboard and mouse will not support anything other than a mouse and a keyboard, which is unfortunate. I don't know why, but there you have it. I'm giving up now.

• Not able to connect the earpiece/headset Bluetooth for Wndows 7 Enterprise (64-bit)

  I tried to connect a new Bluetooth headset to my laptop Lenovo T420.

  The laptop runs on Windows 7 Enterprise SP1 (64 bit OS).

  The laptop has built-in Bluetooth adapter and I turned on.

  Also, I went ON my helmet and guarded in discovery mode.

  After that, I added the helmet using the button 'Add a device' from the control panel-> devices and printers.

  Windows 7 installed the drivers required and the headset is successfully added.

  Now, I tried to connect to the headset using Bluetooth configuration dialog window.

  I did a right click on the icon of headset to Panel-> devices and printers.

  The right click is not display the option 'control' for the headphones.

  He showed that other options - "Create a shortcut", "Troubleshooting", "Remove the instrument", "Properties".

  So, I won't be able to connect my Bluetooth headset.

  I tried the same helmet on my friend's laptop computer.

  His laptop is running on Windows 7 Home Edition (32 bit OS).

  The connected properly Bluetooth headset and the option 'control' is also available on the right click.

  The 'control' option provided the Bluetooth configuration dialog window where I can use the "connect" button to connect the headset.

  Kindly let me know the resolution of the issue.

  If your computer has built-in Bluetooth features, you can enable or disable the functions by pressing on Fn + F5. If you press Fn + F5, a list of the wireless features is displayed in the window Radio wireless.

  You can enable or disable the Bluetooth features with a single click.

  To use the Bluetooth features, double-click the icon of Bluetooth Favorites on the desktop and follow the instructions on the screen.

  You can use the Wireless Radio switch to disable Bluetooth features. The wireless radio switch is usually located on the front of the machine. If you have trouble with the Bluetooth, make sure that the wireless Radio switch is set to position it.

  Source: http://support.lenovo.com/us/en/documents/ht037001

  What is the number and the model of the Bluetooth headset? Enter the number of brand and model of your Bluetooth device in the search field provided in the link below, to see if there are compatibility problems reported.

  Windows Compatibility Center.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=windows%207&Type=Both&CurrentPage=1&TotalPages=133&ShowCriteria=0&Compatibility=Unknown&ProductName=windows%207

• earpiece/headset bluetooth Nokia BH - 503 connection problem in windows 8

  After you have installed windows 8 in my laptop, I've just matched with my nokia BH-503. But after cutting the first time, I don't then reconnect with my laptop. My windows is already updated, but still, I am facing this problem. Even now when I try to add my audio device my laptop can not find this. But I can easily connect this audio device with my laptop and windows 7. So eventually, I'm sure that WINDOWS 8 I have this problem. I already searched a lot information of websites & questions, answers, but still this problem have no solution.  Its very sad news for users of windows 8. :(

  Headphones Audio/stereo/headset BLUETOOTH Connection with WINDOWS 8

  
  
  
  
  Hi! It's Pranzell. Guys, it's like a very simple. Here, follow my steps :
  
  
  1. Switch Off your bluetooth device. Any device, just turn it off.
  2. now the charms blow bar and open settings ->  change the settings of PC-> devices.
  3. keep it button / STOP for 8 seconds or more until a BLUE led flashes and Flash.
  4. your device came into PAIRING MODE, quickly, click "Search devices" in your computer.
   
  5. remember the blue led of your device blinks just 3 minutes (Nokia/hTC/Blackberry/Jabra/Phillips) search and pair your device in this time only.
  6 install/update the drivers manually if necessary. W8 is usually installed in everthing.
  7. the pairs! You will receive a notification, "added stereo Audio Gateway".
  8 open the Panel of control-> hardware and sound-> sound-> the Read tab.
  9. right click on the new added device and assign as the default value. 
  10 say thank you!  :)

• BlackBerry Smartphones the Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  The Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  It's not clear to me, if only the bluetooth Blackberry devices work with the Bold 9700, or any bluetooth device.  With the Bold 9700 recognize to ask the code four numbers when first by aligning it with the HS820?

  I matched two Plantronics, a Motorola and an earpiece/headset Cardo bluetooth with the 9700 and they work very well for phone calls, but I can't get the audio from Media Player to play on one of them.

• Portege M200, earpiece/headset Bluetooth

  Hello

  I have a portege M200 (M725) with a bluetooth adapter.

  I'm trying to connect my headset bluetooth Qware. It is recognized, but it doesn't connect. A message like "can't connect device.

  Would it be possible that the standard Bluetooth adapter does not support headsets?

  Please help our.

  You have the latest Bluetooth Stack & drivers installed?

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• Numbering with earpiece/headset bluetooth problem

  I have a headset bluetooth jawbone and whenever my phone is locked (with fingerprints fingerprint and password), I can't make calls or even deal with it. The only way I can do anything, that's if I unlock my phone. When there is an incoming call, I can use the headset to answer, but other than that, nothing only works when the phone is locked.

  Y at - it an option that I have to toggle or is this just a problem with the phone itself?

  @zerotrunks,

  I'm having the same problem. Bike is addressing this issue. If all goes well it will be addressed in a future update.

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Headset Bluetooth shows and added to the windows7 pc but couldn't connect to it

  I've added the icon bluetooth headset in my windows7 pc device list. But he could not connect to pc. When I click on my icon of bluetooth headset, no connection option, displays the properties of headphones only. In this case how can I connet my headset bluetooth with my windows7 pc?

  Try to run Microsoft solution easy solution to resolve your concern. Click on this link to download it and run it, and then follow the instructions that appear on your screen.

  If the same thing happens, we suggest that you use the System File Checker tool to repair missing or corrupted files. Click on this link and follow the steps.

• Headset Bluetooth Jabra SPORT (with FM receiver)

  If someone got them to work with the W450? I noticed that this wireless earpiece has a FM receiver and I was wondering if this could be a workaround to allow me to use a headset wireless during the race and keep all the functionailty of the device while allowing me to get FM reception.

  I currently have order Jaybird freedom wireless headphones, but just to see these after a few searches on Google.

  each earpiece/headset Bluetooth I tried worked, it should work as well. they have nice air, I bought them almost until I read that the battery life is only 3 hours.

• Can you iPhone 7 connect to USB headset

  Hello!

  I am the owner reasonably high-end headphones Sennheiser Momentum M2 wireless. It connects to my iPhone via bluetooth or using removable 3.5 mm plug + cable. When I use it with my MacBook, I connect USB cable to the USB port on my MacBook Pro to listen to the audio quality (M2 these headphones have a micro-USB connector).

  It made me wonder if I could connect my M2 headset with my iPhone 7 using a micro-USB male for cable male-lightning and listen to music when, for example, the battery is dead, or when I want the best quality audio.

  Thanks in advance for taking the time to answer my question.

  No, the usb headset is cards usb audio full blown for computers that require device drivers work

• Connect two BT headsets at appleTV4

  Hello

  Is it possible to connect two headsets bluetooth in appleTV4 at the same time?

  Apple say several units at the same time, the exodus headset and controllers, but do not know if both headphones work.

  Best regards

  Erik

  Bluetooth audio sends only the stream to a pair of headphones. However, you can buy dispatchers bluetooth spare parts in order to get the desired results, but as computers, tablets and phones only 1 headset can be paired at one point with the ATV...

• Speaker mute when it is connected to the headset

  Since the update my when I connect to my BT Voyager Pro, the phone always sounds via the speaker. Is there a setting for the phone to cut the speakers when connected to the headset?

  Connect to your Bluetooth. Go to the active actions. Set trigger of Bluetooth. Set the action in silent ringtone (or whatever the regime)