Host does not support PHPmail function. How can I configure smtp

Similar Questions

• If the box in advanced running opencl is grayed out, it means my system does not support it and how can I solve this problem?

  If the opencl box is grayed out in advanced running in the preferences settings, does this mean that my system does not support?  If so, how should I do?

  Nice day!

  Here is a list of test GPU (series):

  https://helpx.Adobe.com/Photoshop/KB/Photoshop-graphics-processor-Troubleshooting-FAQ.html

  With regard to the minimum requirements of extraction:

  System requirements | Photoshop

  Kind regards

  Pfaffenbichler

• Host does not support configuring passthrough (DirectPath i/o)

  Hello

  I just installed ESXi 5.0 on a Fujitsu CELSIUS W350. http://support.TS.Fujitsu.com/UKFAQ/ProfessionalPC/Celsius/W3xx/W350.htm

  CPU: Intel Core 2 E6300 http://ark.intel.com/products/27248/Intel-Core2-Duo-Processor-E6300-(2M-Cache-1_86-GHz-1066-MHz-FSB)

  The CPU must be compatible with Intel Virtualization Technology (VT - x)

  As far as I can see that the "Intel Virtualization Technology" is also enabled in the BIOS, but I still just get the message "Host does not support configuring passthrough" under "Configuration-> advanced settings.

  I would like to have access to certain PCI cards in guest. Any ideas how to make this work? USB transfer works very well...

  Thank you!

  Welcome to the community,

  What to look for support DirectPath is ' Intel® Virtualization Technology for Directed i/o (VT-d).

  André

• This host does not support VT *.

  I get the message: "this virtual computer is configured for.

  64-bit operating systems. However, 64-bit operation is not

  possible.  This host does not support VT continue with 64-bit support"?

  If I don't answer him then continues to try to start the virtual machine but cancel then with "the task was canceled by a user" even if I don't cancel anything. If Yes, well, after validation, and attempt to start the ISO XP it says "this processor is not compatible with x 64 mode. Please install a X 86 32-bit operating system. »

  That's what I get every time I turn on a virtual machine where I'm trying to start a 64-bit XP ISO file so that I can install XP 64 bit on it.

  I am running 4.1 on a 64-bit VM ESX (Redhat Linux 5 64-bit) of VMWare Workstation v7.  I tried Windows XP 64-bit and other flavors of

  Linux 64-bit but same problem with all of them.

  My physical pc consists of: CPU Q6600 (which supports VT).  The mobo is P5E - VM HDMI and VanderPool (VT) with XD bit set is enabled in the BIOS.  It is running

  to 3.60 GHz.

  So I can't install any 64 bit OS because it tells me that my pc ESX 4.1 VM does not support VT... I started in its virtual bios but there is no parameter VT it.  Yet, when I boot ESX with the preferred Mode of CPU Intel VT-x/EPT or AMD-V/IVR value I get a message bit on the right down saying: "this host does not support the EFA. For material aid to virtualization with MMU software. "So I don't know that he sees VT during startup of ESX, only virtual computers created in ESX do not seem to see it.

  I have already added the following in my vm ESX 4.1 .vmx file:

  guestOS = "vmkernel".

  monitor_control.vt32 = 'true '.

  monitor_control.restrict_backdoor = 'true '.

  I tried also to add the above in vmx file XP 64 bit VM as well.  Any ideas on how I can install a 64 bit OS in a virtualized 4.1 ESX? Or it is not possible?

  yorkman.

  you run nested ESX. In ESX ESX. You can install 32-bit operating systems in this type of environment. VMware has no VT support for nested VMS

• ESXi 4.1 - Dell Poweredge 2850 - tape backup - host does not support configuring passthrough

  I'm trying to get a tape backup to work on my ESXi host, so I can save my win2003 VM.  I get this error under VMDirectPath, 'host does not support configuring passthrough ".  Under Configuration > storage adapters > I don't see my tape drive listed.  Also, I noticed that my SCSI controller card is NOT on the HCL (Adaptec 39160).  See.  This is probably why passthrough doesn't work.

  So, I was thinking of buying this one (Adaptec 39320) because he seems to be on the list.  This will solve my problem or is this server too old for passthrough to work?

  To use VMDirectpath on an Intel Server chipset used must support Intel VT - d (Directed i/o).   I don't think that's the case with the models of 2850, but if it was you would see an option in the BIOS to enable this.  It is a separate option of VT - x, which allows the host run the 64-bit clients.

• "Your host does not support the current settings for comments.

  My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest.  I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale).  I get the following message:

  -

  ---

  Error

  -

  ---

  Connection error: your host does not support the current settings of comments in mode full-screen.  Try to reduce the color depth or resolution of your guest and try again.

  Impossible to enter full screen mode.

  Do you want to retry?

  -

  ---

  Yes No

  -

  ---

  Does perform a work around?

  Thank you

  Alan

  The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.

• My iPhone does not to import! How can I appear in the Photos and delete those that are already imported?

  My iPhone does not to import! How can I appear in the Photos and delete those that are already imported?

  My iPad appears fine with an option to import the 'new' photos and then delete them once they are imported. However my iPhone appears not at all on the pictures. Although most is already imported via the cloud, some are not, but more importantly, I would remove at least half of 30 000 photos that are taking place on my phone and a "clear items after button import" would be nice right now! I tried to turn off photo stream on my phone, but it still does not appear in the application.

  What can I do?

  Thank you!

  If you use iCloud photo library you cannot delete pictures after the import (or) - deletions on any device will be on all devices - if storage is a question about a device set to use optimized photos

  LN

• Cannot migrate VM between 5.5 ESXi versions: the version of the product to the destination host does not support one or several CPU features

  We receive an error message that I am trying to make sense. I understand very well the notion of compatibility, CPU, CPUID, masking and so on, after working on a competitor hypervisor. However, this error seems wrong (or needs better wording) based on my understanding:

  Here is the message:

  ----

  A general error occurred: the version of the product to the destination host does not support one or several features of the CPU currently use by the virtual machine.

  Characteristics of CPUID level 0 x 1 'ecx' register are indicated with a '1' bit: x00x:xxx0:xx0x:x 000: x 0 11xx:00: 00xx:11xx

  ----

  
  

  This happened during the migration between two hosts ESXi with the same physical processors - in this case, a Westmere X 5650.

  
  

  The source host is on ESXi build 2068190 (5.5). The destination host is on ESXi build 1474528.

  
  

  The bits it seems to complain are:

  
  

  DTES64

  Monitor/MWait

  Cx16

  PDCM

  The punch line seems to be: "the product version of the destination host. However, I have trouble believing that support for these features have been added to ESXi between the two versions. If it were, VMware has been certainly silent about.

  For what it's worth, explicitly set us the CPUID masks in our virtual machines (no, CVS is not an option for us at this time.) This is the mask:

  CPUID.1.EAX = "00000000000000100000011001010001".

  CPUID.1.ECX = "00000010100110001110001000111111".

  CPUID.1.EDX = "10001111111010111111101111111111".

  CPUID.80000001.ECX = "00000000000000000000000000000001.

  CPUID.80000001.EDX = "00101000000100000000100000000000".

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Note that the bits of the message complains (2, 3, 14, 15) * are * in fact forced to '1' in our mask of cpuid.1.ecx. That means (if I understand correctly), ESXi does not have the virtual machine unless the host processor supports the feature. And in our case, the virtual machine will start with happiness on nodes, with both versions. It will be not simply migrate between them.

  So, long story short, is this a bug of ESXi? The error message is misleading? I understand something?

  Thank you

  
  Matt

  To use the masks feature VM in this way, you must replace all the 1 to your masks with-'s:

  CPUID.1.EAX = "00000000000000-000000 - 00-0 - 000-

  CPUID.1.ECX = "000000-0-00--000---000-000---".

  CPUID.1.EDX = '-000 - 0-0 - 0-

  CPUID.80000001.ECX = "0000000000000000000000000000000 -"

  CPUID.80000001.EDX = "00-0-000000-00000000-00000000000.

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Zeros erases the features that are not available on your hosts Westmere, and dashes will leave the other one features.  The problem with those masks was forced to you certain features on who would have normally been off.

• I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEAS

  I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEASE PROVIDE ME WITH A

  Deleted file recovery can recover incomplete files, i.e. the part of these files may be missing.  Recover deleted files is much more reliable if recovery of a backup, instead of using recovery software.

  These things depend on the operating system and the file system.

  One thing, you can see: open one of these files damaged with a text editor, and then make sure that the constant % PDF is somewhere in the first 1024 bytes.

  PS please do not post ALL uppercase; It is very difficult to read!

• I own CS5 with discs & Key Codes, but my new PC does not have a DVD, how can I download the software?

  I own CS5 with discs & Key Codes, but my new PC does not have a DVD, how can I download the software?

  Hello

  You can download it from

  Download the CS5 products

• PowerEdge 1850: Need to add storage: ISCSI or SATA controller or? : Host does not support configuring passthrough

  I have a (non - VT capable) PowerEdge 1850 which took an ESXi 4.0 U1 (Dell Version) installation like a champ.  I know that I probably won't be able to have 64-bit clients.

  In this box of ESXi (laboratory

  Server) I have:

  • 2 x 73 GB SCSI U320 drives in RAID 0 array.

  • 6 GB OF RAM ECC

  • 2 x 1 GB NIC

  • 2 x PCI - X slots (PCI - X slot 133 MHz and PCI - X connector 100 / 66 MHz)

  I want to add more space "VM/Guest" and not spending too much money.

  What is my best solution?

  1. Find a compatible ESATA 3Gbps controller card (I have a nice 500 GB SATA Drive laying around)? ...

  2. Or should I get out an old box and throw a Gigabit NETWORK card and a SATA inside player and try my hand at Openfiler? I have yet to try it.

  3. ... Or... something else?

  Could someone help me hand choose either a PCI controller card - X ESATA/SATA (is - it possible or am I limited by my attached picture?) or a NETWORK card for my spare box (if it is not an old)?  I understand "_ _passthrough configuration"allows my virtual machine to hardware on the host computer directly, but I'm not clear how this effects my plans you want.

  I read:

  • http://www.VM-help.com/esx40i/esx40_whitebox_HCL.php#storage

  • http://ultimatewhitebox.com/iocontroller

  • http://www.VMware.com/resources/compatibility/search.php

  .. .but I am suspicious of money sinking into the material lest my PowerEdge does not support the Configuration PassThrough (does it matter?)  I still have to load a single guest.

  Thanks a lot for your time in advance!

  Get started with what you have. Do not pass anything. Set up the old PC you have as a NFS storage device. Use openfiler or? That will allow you to do some investigation/tests you want to do. Keep your eyes open for a local RAID controller or on an old server with lots of fast scsi storage you can add such as NFS or?

• The new 5.0 does not support the functionality of the tab fox I love and I need a compatible similar add on - who do you suggest?

  I just downloaded firefox 5.0, which does not support the feature of best sites I've used so happily. Is there a similar add on that works with 5.0? I feel like I'm blind!

  Large. You may mark this issue as resolved.

• "Host does not support configuring passthrough"--Dell PE 1950

  I was wondering if anyone can shed some light on how I can be able to configure this server to support a passthrough configuration.

  Basically, what I'm going to implement is a server to allow a single customer to use serial port physical on this server, there is no need for other customers would use the serial port so it can be dedicated to this customer, but currently my Dell Power Edge 1950, who has the last patched ESXi 4.0 running on it displays "host does support not configuring passthrough".

  Any ideas or suggestions would be greatly appreciated.

  Thank you

  This KB article is for ESX (i) 3.5, but you can see that ESX supports the use of a physical serial port in a VM and ESXi don't.   If you wish to stay with ESXi and must support a serial port, you can consider a series to the IP for this device.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• I visit my daughter and they have DSL but it so slow and Facebook does not completely load. How can I know what the problem is and fix it?

  I visit my daughter and they have DSL for the game but not a computer. I can connect to the internet with my laptop very well, but it is so slow and especially never finishes loading. Unable to get Facebook and Farmville to load correctly how to find what is the problem and ffix it? Its driving me crazy!

  Hi DonnaSuttles,

  ·         What operating system is installed on your computer?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the article mentioned for more information:

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Let us know the results.

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.