PowerEdge 1850: Need to add storage: ISCSI or SATA controller or? : Host does not support configuring passthrough

Similar Questions

• ESXi 4.1 - Dell Poweredge 2850 - tape backup - host does not support configuring passthrough

  I'm trying to get a tape backup to work on my ESXi host, so I can save my win2003 VM.  I get this error under VMDirectPath, 'host does not support configuring passthrough ".  Under Configuration > storage adapters > I don't see my tape drive listed.  Also, I noticed that my SCSI controller card is NOT on the HCL (Adaptec 39160).  See.  This is probably why passthrough doesn't work.

  So, I was thinking of buying this one (Adaptec 39320) because he seems to be on the list.  This will solve my problem or is this server too old for passthrough to work?

  To use VMDirectpath on an Intel Server chipset used must support Intel VT - d (Directed i/o).   I don't think that's the case with the models of 2850, but if it was you would see an option in the BIOS to enable this.  It is a separate option of VT - x, which allows the host run the 64-bit clients.

• Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

  Hello

  Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

  List of paths esxcli storage nmp
  SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
  The Runtime name: vmhba0:C1:T1:L0
  Feature: naa.600508e0000000007abafa971050a900
  Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
  The Runtime name: vmhba2:C0:T3:L2
  Feature: naa.60050768018105afc000000000000df0
  Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  Kind regards

  Surya

  Hi Surya,

  No, it's not any problem with the configuration of your path.

  It only means that this policy does not allow additional configuration.

  I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

  Your current configuration does not offer this option.

  Kind regards

  Ralf

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Adobe Captivate 5 - I need to add a mouse movement to a slide that does not...

  I am trying to create training/videos for a drawing software.  Captivate recognizes not that there is a movement of the mouse, as the mouse does not 'click' at the end of the movement, only the Enter key is used.  I need to add a mouse movement so that my clients can see the action taking place better.  I can't find how to add a mouse movement to a slide that is not a mouse already assigned to it.  Any help at all would be greatly appreciated.  Furthermore, I already tried a copy of another mouse slide... It is not possible.

  
  Thank you all in advance!

  Hello

  Right-click the slide in the Filmstrip and choose mouse > see the mouse.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• I need to add a new paper size, but my menu does not include the "custom" tab

  I have a HP Photosmart 8250 and use Windows Vista Home Premium. Using the HP site shows my menu, but my menu is missing from the tab "custom" just below the drop-down list on the paper/quality tab.

  I'll try to uninstall the printer and reinstall with the drivers from the Hp site.  I'm linking you to the software driver for your printer.  Let me know how it goes.

  HP Photosmart 8250

• The new 5.0 does not support the functionality of the tab fox I love and I need a compatible similar add on - who do you suggest?

  I just downloaded firefox 5.0, which does not support the feature of best sites I've used so happily. Is there a similar add on that works with 5.0? I feel like I'm blind!

  Large. You may mark this issue as resolved.

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I just bought an iPhone 4 and it's not let me download from the App Store because it says I need iOS 8 but the iPhone 4 does not support 8, how do I get apps?

  I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?

  Return the iPhone 4 and buy an iPhone more later from model.

  The iPhone 4 does not support any version of iOS iOS 7.1.2 above.

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• Add ESXi4 host to vCenter 5.5 has failed, host do not support VSANS

  Hi all. I have to build a laboratory to test running with vCenter 5.5 and a server Dell PE 1950 ESXi 4.  I try to add the ESXi 4 host to vCenter 5.5 (towards a test cluster), however, the process of adding a host failed with the error message "host"x.x.x.x"does not support VSANS".  If anyone of you experience this problem, and is there a way around this problem?  I understand VSAN is a new feature on ESXi 5.1 and later, but I don't expect you to stop me adding ESXi 4 on the cluster... Thank you.

  My bad.  I thought about it.  I activated the VSANS on the cluster; Once I disabled the option to VSAN on the cluster, I am able to add the host ESXi 4...

• I have connected, but when I need to update apps, again request the password, but it does not work?

  I have connected, but when I need to update apps, again request the password, but it does not work?

  Birgitte salvation,

  Have you tried to enter your system password.

  Please let know if it still does not.

  Concerning

  Megha Rawat

• Power supply pc-need to install disks CS1 does not support the Lions!

  I have a new computer running OS Lion and must install disks CS1, and then upgrade to CS5. He told me that he does not support power pc applications. What should I do?

  You will not be able to install on MAC Lion CS1.

  If you install CS5 with you, you can install it directly on the Lion, not need to install CS1 at all. You simply keys CS1 CS5 series and during the installation.