"Your host does not support the current settings for comments.

Similar Questions

• Your tv does not support the protection of the content of this program. Replace the cable HDMI TV com

  "Your tv does not support the protection of the content of this program. Replace the hdmi to the TV with component cables cable will allow you to view the program.

  I get this message when you try to watch HBO from Directv. DirecTV said it is because my tv does not support HDCP (I have KDL-46SL140), but it actually does. Anyone else having this problem?

  Hi Tom,

  Welcome to the community of Sony!

  This TV is compatible with HDCP you mentioned. Try the steps mentioned on the page below to resolve this issue:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C387911

  Please indicate the solution as accepted, if you find this information useful.

  Thank you for your message.

• If you are connected to wifi, but your phone does not send the blue bubbles for IMessage?

  I have been using my iPhone for awhile and it never happened, but recently someone tried to use my Apple for their IMessage ID and I changed my password but now that this has happened I am more able to

  Send messages in IMessage with wifi. It won't let me send messages with my phone number, so that it uses cellular messages.

  Have you checked if your e-mail address is always selected in settings/Messages/send / receive?

• This host does not support VT *.

  I get the message: "this virtual computer is configured for.

  64-bit operating systems. However, 64-bit operation is not

  possible.  This host does not support VT continue with 64-bit support"?

  If I don't answer him then continues to try to start the virtual machine but cancel then with "the task was canceled by a user" even if I don't cancel anything. If Yes, well, after validation, and attempt to start the ISO XP it says "this processor is not compatible with x 64 mode. Please install a X 86 32-bit operating system. »

  That's what I get every time I turn on a virtual machine where I'm trying to start a 64-bit XP ISO file so that I can install XP 64 bit on it.

  I am running 4.1 on a 64-bit VM ESX (Redhat Linux 5 64-bit) of VMWare Workstation v7.  I tried Windows XP 64-bit and other flavors of

  Linux 64-bit but same problem with all of them.

  My physical pc consists of: CPU Q6600 (which supports VT).  The mobo is P5E - VM HDMI and VanderPool (VT) with XD bit set is enabled in the BIOS.  It is running

  to 3.60 GHz.

  So I can't install any 64 bit OS because it tells me that my pc ESX 4.1 VM does not support VT... I started in its virtual bios but there is no parameter VT it.  Yet, when I boot ESX with the preferred Mode of CPU Intel VT-x/EPT or AMD-V/IVR value I get a message bit on the right down saying: "this host does not support the EFA. For material aid to virtualization with MMU software. "So I don't know that he sees VT during startup of ESX, only virtual computers created in ESX do not seem to see it.

  I have already added the following in my vm ESX 4.1 .vmx file:

  guestOS = "vmkernel".

  monitor_control.vt32 = 'true '.

  monitor_control.restrict_backdoor = 'true '.

  I tried also to add the above in vmx file XP 64 bit VM as well.  Any ideas on how I can install a 64 bit OS in a virtualized 4.1 ESX? Or it is not possible?

  yorkman.

  you run nested ESX. In ESX ESX. You can install 32-bit operating systems in this type of environment. VMware has no VT support for nested VMS

• Cannot migrate VM between 5.5 ESXi versions: the version of the product to the destination host does not support one or several CPU features

  We receive an error message that I am trying to make sense. I understand very well the notion of compatibility, CPU, CPUID, masking and so on, after working on a competitor hypervisor. However, this error seems wrong (or needs better wording) based on my understanding:

  Here is the message:

  ----

  A general error occurred: the version of the product to the destination host does not support one or several features of the CPU currently use by the virtual machine.

  Characteristics of CPUID level 0 x 1 'ecx' register are indicated with a '1' bit: x00x:xxx0:xx0x:x 000: x 0 11xx:00: 00xx:11xx

  ----

  
  

  This happened during the migration between two hosts ESXi with the same physical processors - in this case, a Westmere X 5650.

  
  

  The source host is on ESXi build 2068190 (5.5). The destination host is on ESXi build 1474528.

  
  

  The bits it seems to complain are:

  
  

  DTES64

  Monitor/MWait

  Cx16

  PDCM

  The punch line seems to be: "the product version of the destination host. However, I have trouble believing that support for these features have been added to ESXi between the two versions. If it were, VMware has been certainly silent about.

  For what it's worth, explicitly set us the CPUID masks in our virtual machines (no, CVS is not an option for us at this time.) This is the mask:

  CPUID.1.EAX = "00000000000000100000011001010001".

  CPUID.1.ECX = "00000010100110001110001000111111".

  CPUID.1.EDX = "10001111111010111111101111111111".

  CPUID.80000001.ECX = "00000000000000000000000000000001.

  CPUID.80000001.EDX = "00101000000100000000100000000000".

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Note that the bits of the message complains (2, 3, 14, 15) * are * in fact forced to '1' in our mask of cpuid.1.ecx. That means (if I understand correctly), ESXi does not have the virtual machine unless the host processor supports the feature. And in our case, the virtual machine will start with happiness on nodes, with both versions. It will be not simply migrate between them.

  So, long story short, is this a bug of ESXi? The error message is misleading? I understand something?

  Thank you

  
  Matt

  To use the masks feature VM in this way, you must replace all the 1 to your masks with-'s:

  CPUID.1.EAX = "00000000000000-000000 - 00-0 - 000-

  CPUID.1.ECX = "000000-0-00--000---000-000---".

  CPUID.1.EDX = '-000 - 0-0 - 0-

  CPUID.80000001.ECX = "0000000000000000000000000000000 -"

  CPUID.80000001.EDX = "00-0-000000-00000000-00000000000.

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Zeros erases the features that are not available on your hosts Westmere, and dashes will leave the other one features.  The problem with those masks was forced to you certain features on who would have normally been off.

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• Norton AntiVirus 2005 does not support the repair feature

  Hello

  I ask for help I always get this message error/dialogue:
  "Norton AntiVirus 2005 does not support the repair feature, please uninstall and reinstall"
  along with
  "Please while Windows configures Norton AntiVirus 2005"

  Use the product Recovery CD from TOSHIBA L20? This will affect other tools than Norton?
  Just for mentinon, I have a dual boot linux/Windows.

  Thanks for your reply.
  Kind regards
  Eliyah

  Hello

  I recommend to check the tips on the Symantec Norton:
  http://Service1.Symantec.com/support/NAV.nsf/docid/2004090712504306?OpenDocument&LG=en&CT=UK&SEG=HHO& src = eu_hot

  > Use the recovery CD to the L-20 TOSHIBA product? This will affect other tools than Norton?
  The use of the recovery CD will set your laptop to original settings.
  I mean, the recovery CD will format the whole HARD drive and will delete all your files

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• BlackBerry Z10 BlackBerry Desktop Software does not support the BlackBerry 10 operating system

  I am wanting to sync the Z10 with my Mac andhave times link BB and BB Desktop Software but the message it gives me is:

  This BlackBerry device running the BlackBerry 10 operating system.  BlackBerry Desktop Software does not support the BlackBerry 10 operating system. Visit www.blackberry.com/support to learn more about how to synchronize your multimedia files, backup and restore data from the camera and more, with your device.

  All software are up to date on Mac and BBZ10

  What should I do?

  You have the two desktop software and link configurΘ for dΘmarrer when a device is connected to your Mac. You must go into the Desktop software settings (I don't remember exactly what to do, but there should be some settings at the top right) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that the link is set to open. That should solve your problem.

  Let us know if that helps you.