Similar Questions

• Windows 8 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys

  Hello
  I installed Windows 8 on my Acer Aspire 5740 G and sometimes (almost once a day), windows crashes.

  Bug control chain: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x000000d1
  Caused by the driver: tcpip.sys
  Plant address: ntoskrnl.exe + 7ad40

  Here are the last 3 accidents last minidump files.
  https://docs.Google.com/open?ID=0B6GD2yZ7dxp0YjhFclR6OERQTU0
  https://docs.Google.com/open?ID=0B6GD2yZ7dxp0OTY1VUE1OUZUMms
  https://docs.Google.com/open?ID=0B6GD2yZ7dxp0TU1BeVg4bUJoUjQ

  How can I solve this problem?
  Thank you!

  The minidump files showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) stop error caused by the k57nd60a.sys:

  BUCKET_ID: AV_k57nd60a+ 43ab6

  The k57nd60a.sys dated October 19, 2011, is a driver for the Broadcom network adapter.

  Try to update the network adapter driver.

  I also suggest to update ESET Smart Security to the latest compatible version of Windows 8.

• VMware USB arbitration service cannot be started

  After the upgrade of VMware Workstation 7.1.5 on a host Windows 7 x 64, I now receive the following error message at the launch of the virtual computer:

  "Welcome the connection of USB devices disabled: connecting to VMware USB arbitration service was not successful." Please check the status of this service in the Microsoft Management Console. »

  Examinging the service in the console, it shows installed but not started. It is set to automatic. Failed attempts to start the service through the console:

  "Windows failed to start the VMware USB Arbitration Service on Local computer.  Error 2: the system cannot find the specified file. »

  The path to the file is "C:\Program Files (x 86) \Common" and I checked that this file exists. Manual tries to run this executable from the command prompt seems to do nothing.

  C:\Program Files (x 86) \Common Files\VMware\USB > dir
  Volume in drive C is OS
  Volume serial number is EA55 - B 6, 57

  Directory of C:\Program Files (x 86) \Common Files\VMware\USB

  17/11/2011-16:10 < DIR >.
  17/11/2011-16:10 < DIR >...
  01/06/2011-14:00 1 045 128 dbghelp.dll
  29/08/2011 16:39 < DIR > DriverCache
  01/06/2011 12:09 40 048 hcmon.sys
  01/06/2011-14:00 1 116 672 iconv.dll
  23/09/2011 19:21 libxml2.dll 970 352
  01/06/2011 12:01 7 573 vmusb.cat
  01/06/2011 12:01 5 937 vmusb.inf
  01/06/2011 12:01 37 680 vmusb.sys
  01/06/2011 12:09 609 904 vmware - usbarbitrator.exe
  23/09/2011 19:21 3 824 240 vmwarebase.dll
  23/09/2011 19:21 760 432 vnetlib.dll
  23/09/2011 19:21 707 184 vnetlib.exe
  23/09/2011 19:21 968 816 vnetlib64.dll
  23/09/2011 19:21 932 464 vnetlib64.exe
  01/06/2011-14:00 62 464 zlib1.dll
  14 file (s) on 11,088,894 bytes
  3 dir 70,204,178,432 bytes free

  C:\Program Files (x 86) \Common Files\VMware\USB > vmware - usbarbitrator.exe

  C:\Program Files (x 86) \Common Files\VMware\USB >

  No process is added to the task list during the execution of this file. Process has been seen with ProcMon (attached logfile (Logfile.PML)).

  Discovered a log file generated by vmware - usbarbitrator.exe in C:\Users\Mike Durakovich\AppData\Local\Temp\vmware-Mike Durakovich, attached (vmware-usbarb-Mike Durakovich - 9360.log).  He recorded attempts to load a user of "C:\ProgramData\VMware\VMware USB arbitration Service\config.ini" config.ini file, but the file does not exist, although the directory only.

  You can provide all the help is appreciated. There is NO non-standard USB driver on the system, Sony Ericcson or otherwise, only the original MSFT drivers. In addition, HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} \UpperFilter exist, has been removed, and I restarted, no effect.

  OK - then this is the missing file.
  Please review
  http://sanbarrow.com/network/cmdguide2workstation.html
  and try to manually install the hcmon

  Call for help if necessary

• 7.22 BSOD on Login Win10

  Every time I try to sign in to Skype from 10 to win my PC BSOD and I get this error an attempt was made to run memory not executable asmthub3.sys. But Skype works fine on my laptop to win 10. Any ideas?

  The BSOD is caused by ASMedia USB3.0 eXtensible Host Controller (asmtxhci.sys).

  Try to downgrade the ASMedia driver:

  https://community.Skype.com/T5/Windows-desktop-client/BSOD-every-time-I-log-in-to-Skype/m-p/4304407/...

• Blue screen of death with the computer restarts

  Hi, thanks in advance.

  My problem is when I open Skype, whole screen turns blue with an exception system error. Then, the computer restarts and occurs whenever I try to open Skype.

  Please help, I tried to update the drivers and bios, including windows updates, but still the problem persists. I also associate the dxdiag here.

  The BSOD is caused by ASMedia USB3.0 eXtensible Host Controller (asmtxhci.sys).

  Try to downgrade the ASMedia driver:

  http://community.Skype.com/T5/Windows-desktop-client/BSOD-every-time-I-log-in-to-Skype/m-p/4304407#M...

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.

• Problem with Oracle fail safe 4.1.1 on W2k8 R2 Cluster Failover and Oracle 11.2.0.4 database

  Hi all

  I'm doing some tests on a Windows 2008 (64-bit) R2 two-node failover Cluster.

  I installed and configured successfully bone and the Failover Cluster feature.

  So I followed Oracle Doc-ID 1916391.1 to perform the installation and configuration of Oracle 11.2.0.4 database and Oracle Fail Safe 4.1.1

  After a successful (via Fail Safe Manager) validation of cluster and group, now I'm trying to validate the stand-alone database, but I'm stuck with this error (output in verbose mode of PowerShell):

  PS C:\Users\demo > Test-OracleClusterAvailableDatabase TESTDB - SysPwd (Read-Host-AsSecureString-Prompt "SYS Password ')-verbose

  SYS password: *.

  DETAILES: FS-10915: NODE1: from verification of autonomous resources TESTDB

  DETAILES: FS-10371: NODE1: run the initialization processing

  DETAILES: FS-10371: NODE2: run the initialization processing

  DETAILES: FS-10372: NODE1: resource owner information collection

  DETAILES: FS-10372: NODE2: resource owner information collection

  DETAILES: FS-10373: NODE1: determine the owner of the TESTDB resource node

  DETAILES: FS-10374: NODE1: collection of cluster information required to perform the specified operation

  DETAILES: FS-10374: NODE2: collection of cluster information required to perform the specified operation

  DETAILES: FS-10375: NODE1: analysis of the cluster information required to perform the specified operation

  DETAILES: FS-10378: NODE1: preparation for the configuration of resource TESTDB

  TH: FS-10349: database TESTDB instance is not alive. You want to stop and restart the database instance?

  Confirmation

  Operation does?

  Running dell' operation sulla "Test-OracleClusterAvailableDatabase' likelihood 'TESTDB '.

  [S] Sì Sì [T] a [N] no [U] tutti a tutti [O] Sospendi [?] Guida (he valore predefinito e "S"):

  DETAILES: FS-10350: from the TESTDB database

  Test-OracleClusterAvailableDatabase: OCIEnvNlsCreate failed

  
  

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10999: an internal programming error

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10160: impossible to verify the Oracle of standalone TESTDB database

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10818: provider of resources of the database Oracle failed in preparing for

  treatment for TESTDB resource configuration

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10890: Oracle Services for MSCS failed during the verifyStandalone operation

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Attached is the log of the OFS Cluster Dump (no error in my opinion).

  I surfed around but I can't find anything to solve the problem.

  I think something about the language of the (Italian) OS and Oracle NLS settings (AMERICAN. AMERICA), but obviolsly I'm not sure about this.

  Thanks in advance for any suggestion,

  Alessandro

  Message modificato da 1d457339-524e-4aa5-94aa-fd7d1ae98732 updated: attached is also output trace of the fss.

  Hello Alessandro.

  Solution to the issue is:

  Patch 20744940: 4.1.1.1: ORACLE FAIL SAFE VERSION 4.1.1 PATCH SET 1

• Installation of VMWare after Win8 upgrade problems

  I'm having a problem reinstalling VMWare Workstation 8 on Windows 8.

  I followed all the steps from http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1308

  After running the vacuum and manually removing each step of the process. I'll reinstall the latest version on the VMWare Web site.

  I can do everything except remove C:\Windows\system32\drivers\hcmon.sys from my system.

  Do not let this stop me, I went, when I run 'VMware-workstation-full - 8.0.5 - 893925"under a local administrator account that I meet problems.

  E:\VMware-Workstation-full8.0.5-xxx.exe (I get the following popups)

  • Error 1923. VMware Server authorization (VMAuthdService) service could not be installed. Make sure you have sufficient privileges to install system services.  [Abort Retry Ignore]
    
    
  • Error 1923. VMware Server authorization (VMWareHostD) service could not be installed. Make sure you have sufficient privileges to install system services.  [Abort Retry Ignore]
    
    
  • The MSI "C:\Users\Admin~1\AppData\Local\Temp\Vmware-135202373\vmware workstation.msi" failed. [Ok]
    
    

  Then the installation stopped.

  I scanned the Installer logs, but do not see anything extraordinary. Ideas?

  Ko was useful up to version 7 - it doesn't work anymore

  Do you use a right-click "run as Administrator" when you try to install it?

  you really need to remove all the drivers before trying again - if necessary, use a liveCD windows to delete files

• encryption method (password starting with 06)

  Our company gave us a recommendation:

  "Old DB link encrypted password: . Links the password of the Oracle databases are encrypted using THE (password starts with 05). This methord of encryption is known, and users can decrypt passwords using a simple SQL query. Please re-create the database links to use the new method of encryption (password starting with 06). »

  What this means and how we can make this recommendation?
  

  Hi Artem,

  You can try to drop and recreate the database links after that make sure compatible parameter is set to the current

  version and also this parameter sec_case_sensitive_logon = TRUE?

  The old passwords version probably found with a sql like this:

  Select name, host, username in sys.link$ where MAS as ' 05% ';

  Greetings,

  Damage ten Monkshood

• ORA-39200

  Hi all

  I have two instances ORCL and database MYDB. In the MYDB database, I created a user USR_TEST and user this user I have an APARTMRNT table name. Now, I want this update of database ORCL by expdp, impdp scheme. For what I please see below.

  first of all, I took the export:

  [oracle@localhost ~] $ expdp directory system/revenge3 dumpfile exp.dmp logfile = exp.log patterns = usr_test = dp_dir =

  Export: Release 11.2.0.1.0 - Production Wed Aug 28 02:34:16 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  Start "SYSTEM". "" SYS_EXPORT_SCHEMA_01 ": System / * Directory dumpfile exp.dmp logfile = exp.log patterns = usr_test = dp_dir =

  Current estimation using BLOCKS method...

  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA

  Total estimation using BLOCKS method: 64 KB

  Processing object type SCHEMA_EXPORT/USER

  Processing object type SCHEMA_EXPORT/SYSTEM_GRANT

  Processing object type SCHEMA_EXPORT/DEFAULT_ROLE

  Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA

  Object type SCHEMA_EXPORT/TABLE/TABLE processing

  Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

  . . exported "USR_TEST." "" APARTMENT "5,437 KB 1 lines

  Main table 'SYSTEM '. "" SYS_EXPORT_SCHEMA_01 "properly load/unloaded

  ******************************************************************************

  Empty the file system set. SYS_EXPORT_SCHEMA_01 is:

  /oradump/exp.dmp

  Work 'SYSTEM '. "" SYS_EXPORT_SCHEMA_01 "conducted at 02:37:30

  I'm now import into the schema database ORCL USR_TEST but get error below.

  [oracle@localhost ~] $ impdp system/Xsw21qaz@orcl directory = dp_dir = exp.dmp = exp1.log remap_schema = network_link system logfile dumpfile: usr_test = mydbln

  Import: Free 11.2.0.1.0 - Production Wed Aug 28 02:45:41 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  ORA-39001: invalid argument value

  ORA-39200: link name "mydbln" is not valid.

  ORA-02019: description of the connection to the remote database not found

  I have the database link created in the ORCL instance.

  SQL > select * from dba_db_links;

  OWNER, DB_LINK CREATED USERNAME HOST

  ------------------------------ --------------- ------------------------------ -------------------- ---------

  SYS MYDBLN USR_TEST mydb 28 August 13

  Please help and let me know what the right way or what I'm doing wrong here.

  Kind regards

  Michel

  I told you before moving the dump file on the database server where you want to import, and then import it. And check that this directory dp_dir is present on the server or not. If this is not the case, then imp by using the directory is present.

• HP hardware - parameter ASR?

  We have the intention to extinguish ASR on all of our ESX boxes? What is a recommended practice or not a good idea?

  REAL!

  I recommend you to disable the ASR in VMware environments. I've dealt with this quite a long time. Host abrupt reboots will happen and there's enough fair chance, you're going to suffer a downtime for virtual machines.

  I agree to a certain extent, that the downtime of the VMs will be there if the host memory crashes, sys, failures etc, which will allow the ASR to kickin, what is good, as told by HP... But once again the threshold ASR of manipulation of these accidents are quite high.

  Disable ASR prevented sudden reboots HOST as many usual crash restarts.

  My vote for your question will go to DISABLE the ASR!

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V), SNIA SCP.

  Please give points, so useful

• Installation of the remote control problem

  Hello
  
  I want to install in the rcu on linux, so I went to the rcuhome/bin path and then run the command. / rcu (TI throwed the error "undefined DISPLAY.
  Set the DISPLAY environment variable, and then run again. »)
  
  so I tried to adjust the display as: $ export DISPLAY = 101.23.100.1:0.0 and checked in the env, it displays the same thing.
  
  but after setting the display when it run the same command again. / UCR he throwed error as below:
  
  Failed to initialize the recorder with location: /apps/OBIEE/Software/rcuHome/rcu/log/logdir.2012-01-06_12-36/rcu.log
  The initialization of the journal using the following location: /tmp/logdir.2012-01-06_12-36/rcu.log
  Exception in thread "main" java.lang.InternalError: can't connect to X 11 window server using '101.23.100.1:0.0' as the value of the DISPLAY variable.
  at sun.awt.X11GraphicsEnvironment.initDisplay (Native Method)
  in sun.awt.X11GraphicsEnvironment.access$ 100 (X11GraphicsEnvironment.java:52)
  to sun.awt.X11GraphicsEnvironment$ 1.run(X11GraphicsEnvironment.java:155)
  at java.security.AccessController.doPrivileged (Native Method)
  to sun.awt.X11GraphicsEnvironment. < clinit > (X11GraphicsEnvironment.java:131)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:68)
  to sun.awt.X11.XToolkit. < clinit > (XToolkit.java:89)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  in java.awt.Toolkit$ 2.run(Toolkit.java:834)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:826)
  at com.jgoodies.looks.LookUtils.isLowResolution(LookUtils.java:484)
  to com.jgoodies.looks.LookUtils. < clinit > (LookUtils.java:249)
  to com.jgoodies.looks.plastic.PlasticLookAndFeel. < clinit > (PlasticLookAndFeel.java:135)
  to oracle.sysman.assistants.rcu.ui.InteractiveRCUModel. < init > (InteractiveRCUModel.java:117)
  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:292)
  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:344)
  
  
  any help?
  
  Thanks in advance

  Hello
  Yes, 100% you must have privileges to SYS. You cannot proceed without it. When you run the rcu utility, it will ask for db host, port, sid, SYS username, password. NOW, this remote is a great giant sql Script (s), which creates schemas, and Tablespaces, users, Tables, views, sequences, etc.. Regional coordinating unit must therefore details SYS. Some people will try to manually create these 2 patterns such as bi_platform, bi_mds and try to run the RCU. But it won't work.

  An option is, give the UCR Zip file to your SYS DBA self-introduction. Give him instructions. As unpack it and run the rcu.bat file. Its very simple. It takes about 15 meters. Procedure step by step, you can and let DB guys to do themselves.

  And Yes, you can run the RCU from any operating system like Windows or Linux. So in your case use Windows. All you need is db host, port, sid, user name, password for SYS SYS. That's all.

  Thank you
  Ravi Jegga

• Wrong password for the user

  I read 2 day s/n. Now, I'm Chapter 9. I want to read and practice.
  1. I open Enterprise Manager
  2. then enter username: sys
  password: *.
  3 Enterprise Manager opened.
  4. then I opened the backup schedule Page
  5 but when I enter username and password and click Ok this time appeared:
  
  Error - connection to the host as user sys failed: ERROR: wrong password for the user
  
  I did it with also HR user.
  This time appeared
  Error - connection to the host as user hr has failed: ERROR: wrong password for the user

  Because you must use
  The host credentials. It is not oracle usename, it's operating system user account.
  under linux, you can use oracle (membership group DBA) user in windows as administrator
  in windows, run parameters-online control panel > administration tools-online DCA political security-online user rights => logon as a work of bach and then add your OS user here.

  Published by: admin on May 5, 2010 02:40

• File acpi.sys caused an unexpected error Windows 2003 on the Linux host

  Hello

  I have VMware server 2 on a linux host that is fortunately supporting a windows 2003 server that was installed after the converting of a physical machine.

  I am trying to install a second server Windwos 2003 CD as a new installation, after seting the machine the web UI I start and get:

  Installation of Windows

  ============

  File acpi.sys caused an unexpected error (32768) 6186 line in d:\srv03rtm\base\boot\setuo\setup.c

  Press a key to contiune

  I don't see what to do and a google and search the forums does not help.

  Clues?

  Hello

  Check your installation CD.

  Try to make this CD image and run your VM to ISO image installation.

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.