Host name can not enter in the browser

Similar Questions

• Unsigned app deployment failed: "error: host name can not be null.

  Hello. "" I tried to download an app with Flash Builder 4.5 for my physical playbook unsigned, but this message has occurred: ' error: host name can not be null. The same mistake that happened when I tried to download the debugging token, but I managed to manipulate it using the command line. However, the problem with downloading mind because I can't run and test applications signed and cannot use the debug mode. Someone at - it had the same problem or knows how to get around? Additional information: Windows 7 (x 86); Flash Builder Burrito (build 287807), Playbook OS Version 1.0.1.1710

  I take that as a "I am the only one having this kind of problem" and nobody knows how to solve this (or has not yet read)

  [edit] so much worse... I just changed the IP address, this is the reason for the error.

• ? I downloaded the update this morning - 06/06/12 - and noew I can not enter in the develop module.

  ? I downloaded the update this morning - 06/06/12 - and noew I can not enter in the develop module. I get an error message.

  The problem seems to have been fixed. When I checked to make sure that all the other modules are accessible, Lightroom 4 quit, rebooted and then checked something - "power point curves", went through a kind of internal procedure, after having whiuch the problem no longer existed. The error message was: "an error occurred when attempting to change modules." I decided to respond this way in case somebody stumbles into that.

  Thank you for responding.

• Cannot install the vCenter 5.5 - error when installing the inventory Service (host name can not be null)

  Hello

  I tried to install a new vCenter Server 5.5.

  First, I installed SSO without any error. After that, I tried to install in Service of the inventory with the error "check SSO has failed."

  Can someone help me?

  Thank you!

  PS

  vm_ssoreg.log:

  [2014-01-13 07:12:01, 900 main com.vmware.vim.install.cli.RegTool of DEBUG] $Id: //depot/vicore/vicore-2013-rel/regtool/viregtool/src/main/java/com/vmware/vim/install/cli/RegTool.java#4 $

  [2014-01-13 07:12:01, 904 main com.vmware.vim.install.cli.RegTool of DEBUG] executing command: checkVersion d https://vm_ts_vcenter.domain.com:7444/lookupservice/sdk - version number 0 - c c:\users\admini~1\appdata\local\temp\1\{28d9c95c-f311-4368-a2ff-ffdf4d5bc8e4}\certs--insecurite

  [2014-01-13 07:12:01, 953 main com.vmware.vim.install.impl.RegistrationProviderImpl INFO] Initialization of provider of record...

  [2014-01-13 07:12:02, 707 main DEBUG com.vmware.vim.install.impl.LookupServiceAccess] Creating sales VMODL for LookupService

  [2014-01-13 07:12:02, 716 main INFO com.vmware.vim.install.impl.CertificateGetter] get SSL certificates for https://vm_ts_vcenter.domain.com:7444/lookupservice/sdk

  [2014-01-13 07:12:03, 140 main com.vmware.vim.install.impl.CertificateGetter of DEBUG] Establishing a connection socket to vm_ts_vcenter.domain.com/172.16.37.72:7444. Timeout is 60000

  [2014-01-13 07:12:03, 587 main ERROR com.vmware.vim.install.cli.commands.CommandArgumentsParser] Host name cannot be null

  [2014-01-13 07:12:03, 588 main com.vmware.vim.install.cli.RegTool INFO] Return code is: InvalidInput

  It's because of your host name vCenter containing underscore. VMware KB: vCenter Server with the host name contains underscore does not register in vSphere Web Client

• Can not enter in the address bar.

  Since I usually use bookmarks or pinned tabs, it's perhaps a week or more as the last, I tried to do, but when I tried today the area of the address bar is there, but completely empty and the edge of the box seems to be missing to the left and down. The mouse arrow does not a cursor change when hovered over the box and I can't enter type.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Can not enter in the Mode of recovery to Neo V... Help, please

  HII friends... I anchored my Xperia Neo V a few days ago and flashed with ClockworkMod...

  The problem is that I can't enter into Recovery Mode via ROM Manager or QuickBoot
  When I click on reboot into Recovery its just restart the phone... So kindly help pleaseee

  Forst, go to MCG app and select install MCG (if not done before). Now, turn your unit off and restart it, as soon as you see blue LED, press the home/menu/back key

  See if you enter MCG

  If not then I must assume that you have installed the wrong MCG

  The app is different for Neo V

  http://Forum.xda-developers.com/showthread.php?t=1364509

  Install this app from above, after you install it, go to app MCG > select Installer MCG > fact

  Now restart your device

  as soon as you see blue LED, press home/menu/back key

• CAN NOT ENTER IN THE WOODS

  I can't get into the bios, I tried upgrading it too see if that was the problem, but it does not how can I get bios is anyway I can do I try and I need to put a second more robust

  any ideas on how to enter

  For example, when your computer restarts.

  1 you get to see the press f1 or delete button to enter the bios?

  2. If you press it, access you the bios?

  Try to remove the battery of the bios for 5 minutes. Reinstall it and try again to get into the bios.

• Can not enter in the internet because of the proxy

  Hello.

  I can't go in the internet because it says that I need to check my current configuration of the proxy server.
  How do I do that?

  Thank you.

  I put t know what that has to do with Toshiba or Toshiba laptop.

  If you have a modem or router Wlan then you must configure this device first.
  You must put all the data from the ISP.
  Then everything should go automatically, you must connect the LAN cable to the router/modem and would automatically receive the IP address.

• Error message: the application has failed to start because its side-by-side configuration is incorrect and can not enter in the email and save records

  I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.   I used this link to email for 2 years and NOW I can't in my email and all my saved folders.

  Hi KathyHendges,

  1. What mail client do you use?

  Step 1:

  You can try clicking with the right button on the link and select run as administrator and check.

  Step 2:

  This error code can occur due to corrupted Microsoft Visual c++ installation.

  To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• Can not enter into the BIOS of Toshiba Satellite Pro S500-15W

  I am trying to enter a Toshiba satellite pro S500-15W bios. I tried the key F2 and FN + F2 keys don't set fixed no joy. Then downloaded the latest version (2013) the update of the bios for this series and windows 7, 32 bit. When I try to run the update I get the message "this computer is not supported". If anyone can help.

  Try to hold down the F12 key during the restart of the unit. You will see several options on the page that appears. You'll want to install at the bottom. I have the case of the warning you will are you aure you have win 7?

  Most of the time you get this error, or you have a different version, in this case 64 bit? or another OS 8.1 or 10? Take a look at your computer, control panel settings of IE - settings then you can ook at what OS you have and the 32-bit version of or64.

• Can not enter in the parameters of origin on Satellite L350

  I have a real problem with that.
  L350-170, Windows Vista.
  The machine started giving problems, and my son (he did the right thing of thought) used the recovery cd. Only problem is, this machine has never had a recovery cd - he used his machine of Toshiba Equium mothers. Now, the drivers are all wrong. Is it possible that I can enter the original settings?
  Thank you.
  Allan.

  Unfortunately, now is too late for the original settings. It's a big mistake to use the recovery disk designed for another model of laptop.
  You're right, laptop was delivered without reinstall but drive in s user guides document is clearlu describes why and what needs to be done about it.
  This laptop came with the option to create recovery discs.

  Now, if you want to have the original disc again, you must order it under https://backupmedia.toshiba.eu/landing.aspx but it is not free.

  Good bye

• Can not enter in the Apple support community

  I'm using Firefox right now. If I tried to do this in Safari, it wouldn't work. I have not encountered any problems anywhere else. My Macbook Pro withdraws as good to go.

  Can you explain more about this problem?  The CSA is the only site on which you experience this problem you get any kinds of messages or the computer performs any type of sound when you try to type?  What did you do to try to fix?

  Go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.

• Can not enter in the command prompt

  I recently needed to go in my command prompt to check something, but when I tried it, I couldn't find it. I tried to go through a few things, but I have not yet get what anyone. I have a Windows 7 Pavilion g7, if that helps. Thanks in advance!

  Luke,

  Have you tried to open it in administrator mode?

  Click the link to see what I mean

  http://www.mydigitallife.info/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  Or

  http://TechNet.Microsoft.com/en-us/library/cc947813 (v = WS.10) .aspx

• BlackBerry smartphones can not enter in the application of the texts (Curve 8520)

  Hello. When I use the trackball to highlight text icon and press it to open the application, all that happens is that the ball stops working until I press the red button "hang up." In any case, I can't in my texts. Any ideas?

  Hello and welcome to the community!

  Each time a random strange behavior or slowness comes, the first thing to try is a proper reboot:

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.

  See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Good luck!

• Can not enter in the drive on my Mac.

  When I try to open the drive into my Mac, I arrived at the place to enter my birthday and then it crashes.  What should I do?  Happened 5 times already.

  I would try to connect to https://exportpdf.acrobat.com/ - you should be able to enter any missing information profile from there.