Host of character is very slow and glitchy when using my own character design

Therefore, do not misunderstand with this post - animator of the character is such a fun and effective tool in my opinion, and it works oddly when you use the preset/pre-made characters that comes with it.

However, when I created my own character design in Illustrator from the shell that host character gives you, it seems to make the application run very slowly. I see still some movements with my character design, but a lot of times, it's whole body moves and the edges will become wobbly. I chose 'New puppet in Illustrator' and you just copy all the elements of my design in the layers that it already provided and maintained the same naming conventions. My character is not too advanced either (certainly not as detailed as the wendigo), and if I could get it works, it would save me an extreme amount of time in my animated film!

I am running the character animation (Preview) on an iMac (OS X 10.9.5).) I enclose below my character design.

Expert.jpg

Hi Shane. We currently have a behavior for illustration Illustrator which is called "earthquake." If your work HAVE a lot of paths, it will move each of them and which can really slow things down. You can disable the Wiggler behavior by selecting the track of puppet, then pressing the red button next to the behavior of Wiggler.

If it is a common problem, we will probably default this OFF. We also plan to eventually offer a similar look with Photoshop illustrations.

Tags: Character Animator

Similar Questions

  • My e-mail address is VERY slow and crashes when I click on a message - rpet Mozilla does not. How can I fix it?

    My account email is VERY slow, when I click it it says Mozilla does not.
    It takes anywhere from 30 seconds to several minutes to open a new message or other messages.

    My other account works fine. What can I do to Fix this?
    

    Start * Windows * safe mode with active network
    -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
    -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
    - Http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx XP

    Always in Windows safe mode, start thunderbird in safe mode
    - http://support.mozillamessaging.com/en-US/kb/safe-mode

    Problem disappear?
    Just reply to inform us of the results.

  • My IPod 5 is VERY SLOW and GLITCHY

    I had my iPod 5 for some time and has been a great device with fast response time and was great... But it seems that around the time iOS 9 hit my iPod has been terrible takes about 2 minutes to turn on (used to be 30 seconds) and once that happens it wont slide to unlock and then go to sleep and sometimes turns off the coast, but when it isn't you can't wake it with button / stop or the "home" button you have to wait about a minute before he wakes up so he usually slide to unlock but then u get enter your access code and it freezes 2 digits in your access code, and then finally u enter in iPod and takes a little until you can slide the screen and then it takes a while before you can open an app. I tried hard, factory reset back ups idk what else to do. Do you think the Apple Store will do anything.

    If you have restored successfully (went through all the steps without error) to factory settings / new iPod via iTunes (not via settings > general > reset > erase content and setting) and still have the problem that indicates a hardware problem.

    Make an appointment at an Apple store Genius Bar...

    Shop Apple Store - Genius Bar

    http://www.Apple.com/retail/Geniusbar/

  • DW CS6 very slow, hangs, lags when using startup code.

    Hey guys,.

    I used bootstrap for awhile and never had any problems. All the South I hurt myself when lag using bootstrap. All of my pages Web saved locally using the bootstrap information now take 10-20 seconds to open a page, switch between open pages (tabs) even in mode code without live view activated. I tried to delete cache, some random reg-Edition and seen disableing CSS and Java. Nothing seems to help. I suspect it has something to do with my router, I had network problems recently too. I have to redirect ports for DW? Other solutions, what is ' y'all may think?

    .. try passing DW to my SSD and put the site out there.

    That sounds like a good plan.

    I've been asking questions here and there on this forum for years and it's always you, Nancy O, which seems to respond to...

    Serendipity?  I'm not an employee of Adobe.  I am a freelance web developer and graphic designer. Adobe employees have a STAFF badge with their name. I'm just a product users here who spends far too much time in these forums.

    To encourage participation, Adobe Community MVP and Forum Moderators are compensated with a free subscription to creative cloud.

    Join the experts

    Nancy O.

  • 30/31 of Firefox is very slow and plant constantly?

    Hello.
    Since I updated to 30 FF, I find it VERY slow and it blocks many times a day. I was happy when version 31 is out because I thought it would work better, but it doesn't.
    The pages take forever to is to load, most of the time they will not and I have to recharge myself and then maybe they are responsible.
    Also, it crashes all the time. I noticed it's on down each time that it kind of "freeze" or when it is something big, which is not at all big load. I've never had this problem before, but have been dealing with this for months now and I'm tired instead.

    I think I have almost tried everything. Even uninstalled. I'd appreciate any help, as I would like to continue using it. Thank you.

    So far, your look of reports of accidents like these;

    Signature OOM OutOfMemory

    Signature coreclr.dll

    Signature gfxContext

    Total virtual memory 2147352576

    Available virtual memory 243638272

    System Memory Percentage use 89

    Available swap file 2438729728

    Available physical memory 346771456

    OOM 2064385 Allocation size

  • Since this morning my Thunderbird is not - responding whenever I try to open or send an email it is not responding and is very slow and I have to close it. Difficulty?

    Since this morning my Thunderbird is not - responding whenever I try to open or send an email it is not responding and is very slow and I have to close it. I tried to delete the global-messages - db.sqlite but it does nothing. Any ideas?

    Check if this happens in safe mode:

    Did you try to compact your email?

    And the record of repair?

    • Click with the right button of the mouse on Inbox > > Properties > > File Repair
  • Since Firefox 13.0.1 my scrolling speed is very slow and lazy. Disabled all the plugins still don't work. Any difficulty? I HATE IT!

    As soon as Firefox when through it's automatic 'upgrade' the scrolling action became very slow and lazy. I tried all this suggested (disable plug-ins, re-installing Firefox, restart the computer, etc.), but I still can't get back to the way it was. Is there a fix, or how can I re - install the older version that worked so well? I HATE THIS!

    Hello mjg263, firefox 13 introduced a scroll smoothly by default - it might not work well on older hardware.

    Please, try to update your video driver or if this does not improve the case you can disable scrolling smoothly in firefox/tools > options > advanced > general.

  • Firefox is very slow to respond when you open and almost always no longer meets the total even refusing to respond to the Task Manager "end program command @.» The ' does not not @ error also happens during navigation online.»

    Firefox is very slow to respond when you open and almost always unresponsive altogether, refusing even to respond to Manager task "End program" command. The "not responding" error message is also over browsing online. Several attempts must be made to get online. A loss of stability seems to be endemic at the present time.

    Try to follow the instructions here: Firefox crashes or does not - how to fix

  • iPad 2 running very slow and freezing

    My iPad2 worked very slow and freezing.  It is quite frustrating and I hope someone has a tip or a solution for my problem.  I've updated my ios and right now I'm in ios 9.3

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Satellite Pro M10 suddenly ran very slow and freezes

    Two weeks ago, that my SP M10 is suddenly very slow and freeze. After a reset, it began to check the HARD drive, which lasted about 8 hours, and several repair lost clusters to files. But the student pilot did not run faster. I reformatted the HDD to FAT32 (NTFS has not worked) and reinstalled Windows XP. First, it seemed to work very well, but a few hours later, it freezes again.

    After 10-20 min, I got access. This has not changed so far. CHKDSK another also lasted several hours and again showed some lost clusters. I think that my HARD drive is damaged, but how can I see if there a lot of bad sectors? Can I fix it? Can I possibly replace my 40 GB HARD drive with a larger HARD drive capacity?

    Are there restrictions or can I use any brand?

    Hello

    I had the same problem with my Satellite 1900. The result was the HARD drive damaged (bad sectors). I tried to fix it with different tools, but without success. The best solution is to swap the HARD drive.

    Good bye

  • Satellite Pro L500 - wireless connection is very slow and unstable

    Hello

    I bought a Satellite Pro L500 a couple of weeks (Windows 7 and Realtek 8191SE). I have no problem connecting to public networks, but I can't use it at my place, where I have a broadband cable connection.
    The strange thing is that, in the same room, I have no problem with my old A105 Satellite (Windows XP).

    It is also very strange the fact that, even if the signal is good, sometimes excellent, the connection is very slow and unstable (it disconnects when I try to browse the Internet).

    I have already tried:

    -Update the Realtek drivers.
    -Disconnect the firewall;
    -Modification of the properties of the Realtek card.

    Maybe it's a problem with the software or, on the contrary, with the material?

    Thank you!
    Poncet

    Hi Patrick,

    If you can connect to public networks correctly, I think that this problem is related to your router at home. So I would recommend updating the firmware on your router. You can get it on the page of manufactured goods.

    Also try to disable WLAN encryption and MAC address filtering.

    By the way: you can access the Internet at home via a cable connection?

  • Satellite A40-151 started very slow and have hours to transfer a single file

    Hello.

    I've had my A40-151 more than two years now, and up to last month, I got no problems at all. However, last month, it began to be very slow and took hours to initialize. I'm worried that I would lose all the data that I didn't back up, and so I bought an external drive to transfer data.

    As I was doing this, my laptop started making grinding noises, and it took up to 12 hours to transfer a single file. I got to the place, I bought it, and they said it had crashed and that it was not something they could do other than get it back - and so I lost all my data.

    When I came back, it was OK for a few hours and then started grinding again! And I think it might be something to do with the CD/DVD drive. I uninstalled the drive, and the squeaking seems to have stopped as long as the "drawer" player is open! Help, please!

    How can I get the drive replaced? My laptop is no longer under warranty. No I lost everything this that data for nothing?

    Anyone have any ideas?

    Hello

    No, the squeaking is probably from the reader of CD/DVD being dry, while optical rides on squeak track passing. But the long loading is certainly a hard drive problem. Looks like a head crash. The head is more or less what locates and reads/writes data from the HARD drive. When this plant it is unable to read/write/or locate the data on the surface taking more and more to save the data, transfer data and load the operating system. Two problems independent of each other. If your ASP cannot repair the cd that squeaks, then they can replace it one that works normally. I hope this has helped you.

  • The machine is very very slow and constantly beach balls, System wiped 3 times by Apple store

    I have a 27 June 2015 iMac 5 k, 3rd two precedents as a failing. I upgraded to 24 GB of RAM and use PS CC, Lightroom with two plug-ins software nick Imagenomics.

    the machine is very very slow and beac balls constantly...

    Sometimes, I visited pirate bay re music but all f my software is legitimate...

    I have taken e machine to my local application, e store twice, claiming the material is good, but the software is obviously not correct that they admit that it's very slow, so they wipe the machine and system restore...

    sound she's like going round a roundabout...

    Help

    So, what operating system Mac are you on? You are not running an iMac on iOS.

    The Apple store actually erase your entire hard drive or they just install the OS on top of what you have?

    If you downloaded from any type of torrent/pirate bay Web site, there are some that will include a few unwanted songs (like bloatware/adware/malware) with their free software, especially if this software costs money elsewhere - for example, you might have installed something that will not be fixed by installation of operating system unless all of the hard disk will be deleted first. You can view the results after you run this small diagnostic tool of one of our employees of Developer:

    http://www.etresoft.com/etrecheck

  • Halo 2:When I use my mouse on the line, the cursor movement is very slow and jerky.

    original title: halo 2

    Hello... Just installed Halo 2 on my Windows 7, 64-bit desktop.  I have all the latest drivers. All other games work fine.

    When I use my mouse on the line, the cursor movement is very slow and jerky. Unplayable.

    I was looking for a patch for the game or suggestion on how to correct adjust them.  I tried the option in game of adjustment of moving the mouse, but it did not help.

    Suggestions please...

    ----------------

  • computer running very very slow and takes place in Not responding mode

    My computer is very slow and when I finally get in line and try to do something or go to another web site, it goes into Not responding mode

    The malware scanner

Maybe you are looking for