host of profiling

Similar Questions

• VMWare ESXi host AutoDeploy profile questions 5.1

  All,

  Our Organization has just bought a UCS configuration, and we are working to build on the new system. I have scoured the internet looking for a potential solution, but have not found. We get the following operation:

  VM Auto deployment server

  ESXi PXE boot process

  Set of rules that applies the profile of home on the connection with the vCenter

  We are experiencing a problem where when a host is added to the vCenter, the location of the swap of our host profile file does not apply (the swap file is on a data store that is also configured in the profile of the host). In addition, the vNIC for our vSwitches configuration has two network adapters for standby on all 3 vSwitches. The configuration is the following: two vNIC by switch, the expected host profile configuration is set to active, active. Each vNIC for each vSwitch is on a separate side of the UCS fabric (a and b). Cards network to view DHCP addresses assigned in ranges appropriate for all configurations, but the vNIC is intelligence rather than active, active.

  If more information would help to understand this issue, I am happy to provide.

  Thanks in advance.

  Apparently, it's a known issue:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2055633

• PowerCLI and host of profile Configuration selections

  All,

  When you use the host profiles, we must be able to check and uncheck the settings.

  In this way, we can disable configurations to be applied or verified compliance.

  (in the Client vSphere, made a right click the hostprofile / toggle the profile Configuration)

  
  But now I want to do with PowerCLI

  Someone at - it ideas?

  Thank you and best regards,

  Harold

  https://Twitter.com/hharold

  I'm afraid that this currently not available through PowerCLI cmdlets.

  But if you look at the different sections in a hostprofile (see also your help with Host Profiles and necessary PowerCLI)

  you will notice that each of these components (authentication, Firewall,...) have an Enabled property.

  With this property and the UpdateHostProfile method you can enable/disable specific components.

  Let me know if you need a sample?

• host vCenter profiles 5

  environment mixed with ESX4.1 and 5.0 hosts.  vCenter was upgraded to 5.   Introduced 2 host ESXi5.  First host of ESXi5 used as model for the host profile used to check compliance on second ESXi5 host.   However, had the State of non-compliance of local disk-related errors.   Confused.  If someone has encountered this?

  It is a known issue with the difficulty of follow the below KB

  http://KB.VMware.com/kb/2002488

• Alarm to monitor the deviation from host profile

  So, I used the creation of Luc alarm script and massacred to create (hopefully) an alert when a host deviates from his profile.  However while I first thought I cracked, I clearly do not have.

  Can we see something glaring by the following:

  # Variables

  $vc = "vcsa.lab.mdb - Lab.com.

  $credential = get-Credential

  $mailto = " " [email protected] "" "

  # Connect to vCenter

  SE connect-VIServer $vc - credential $credential

  $alarmMgr = get-view AlarmManager

  $dc = "London".

  $entity = get-data center $dc | Get-View

  # Create the AlarmSpec object

  $alarm = new-Object VMware.Vim.AlarmSpec

  $alarm. Name = "Violation of the host profile.

  $alarm. Description = "home deviation of profile screens.

  $alarm. Enabled = $TRUE

  # Alarm action

  $alarm.action = new-Object VMware.Vim.GroupAlarmAction

  $trigger1 = new-Object VMware.Vim.AlarmTriggeringAction

  $trigger1.action = New-Object VMware.Vim.SendEmailAction

  $trigger1.action.ToList = $mailTo

  $trigger1.action.Subject = "not compatible with the host profile.

  $trigger1. Action.CcList = «»

  $trigger1. Action.Body = «»

  # 1A - yellow transition-> red

  $trans1a = new-Object VMware.Vim.AlarmTriggeringActionTransitionSpec

  $trans1a. StartState = "yellow".

  $trans1a. FinalState = "red".

  # Transitional 1 b - red-> yellow

  $trans1b = new-Object VMware.Vim.AlarmTriggeringActionTransitionSpec

  $trans1b. StartState = "red".

  $trans1b. FinalState = "yellow".

  $trigger1. TransitionSpecs += $trans1a

  $trigger1. TransitionSpecs += $trans1b

  $alarm.action.action += $trigger1

  # 1 compatible host expression: profile

  $expression1 = new-Object VMware.Vim.EventAlarmExpression

  $expression1. EventType = $null

  $expression1.eventTypeId = "Host" compatible with the profile

  $expression1.objectType = 'HostSystem.

  $expression1.status = "yellow".

  # 2 expression - Profile non-compliant host

  $expression2 = new-Object VMware.Vim.EventAlarmExpression

  $expression2. EventType = $null

  $expression2.eventTypeId = "not compatible with the host profile.

  $expression2.objectType = 'HostSystem.

  $expression2.status = "red".

  $alarm.expression = new-Object VMware.Vim.OrAlarmExpression

  $alarm.expression.expression += $expression1

  $alarm.expression.expression += $expression2

  $alarm.setting = new-Object VMware.Vim.AlarmSetting

  $alarm.setting.reportingFrequency = 0

  $alarm.setting.toleranceRange = 0

  # Create the alarm.

  $alarmMgr.CreateAlarm($entity.) MoRef, $alarm)

  # Disconnect the vcenter

  Disconnect-VIServer $vc - confirm: $false

  I tried first with a green status instead of yellow... but then the script will not yet create.  In its current form, I get a load of the SOAP faults page...

  Any help would be (as always) greatly appreciated.

  -Mark

  With the help of Oynx I have it fixed.  Here's what it is today:

  # Variables

  $vc = "vcsa.lab.mdb - Lab.com.

  $credential = get-Credential

  $mailto = "[email protected]".

  # Connect to vCenter

  SE connect-VIServer $vc - credential $credential

  # Get the data center

  $dc = "London".

  $entity = get-data center $dc | Get-View

  # Create the alarmspec object

  $spec = new-Object VMware.Vim.AlarmSpec

  $spec.name = 'Deviation from host profile.

  $spec.description = 'home deviation of profile screens.

  $spec.enabled = $true

  # 1 expression: profile host is non-compliant

  $spec.expression = new-Object VMware.Vim.OrAlarmExpression

  $spec.expression.expression = new-Object VMware.Vim.AlarmExpression [] (1)

  $spec.expression.expression [0] = new-Object VMware.Vim.EventAlarmExpression

  $spec.expression.expression [0] .eventType = "HostNonCompliantEvent".

  $spec.expression.expression [0] .objectType = "HostSystem.

  $spec.expression.expression [0] .status = "red".

  # Create the alarm action

  $spec.action = new-Object VMware.Vim.GroupAlarmAction

  $spec.action.action = new-Object VMware.Vim.AlarmAction [] (1)

  $spec.action.action [0] = new-Object VMware.Vim.AlarmTriggeringAction

  $spec.action.action [0] .Act = new-Object VMware.Vim.SendEmailAction

  $spec.action.action [0].action.toList = $mailto

  $spec.action.action [0].action.ccList = «»

  $spec.action.action [0].action.subject = "not compatible with the host profile.

  $spec.action.action [0].action.body = «»

  $spec.action.action [0] .transitionSpecs = new-Object VMware.Vim.AlarmTriggeringActionTransitionSpec [] (1)

  $spec.action.action [0] .transitionSpecs [0] = new-Object VMware.Vim.AlarmTriggeringActionTransitionSpec

  $spec.action.action [0] .transitionSpecs [0] .startState = "yellow".

  $spec.action.action [0] .transitionSpecs [0] .finalState = "red".

  $spec.action.action [0] .transitionSpecs [0] .repeats = $false

  $spec.action.action [0] .green2yellow = $false

  $spec.action.action [0] .yellow2red = $false

  $spec.action.action [0] .red2yellow = $false

  $spec.action.action [0] .yellow2green = $false

  $spec.setting = new-Object VMware.Vim.AlarmSetting

  $spec.setting.toleranceRange = 0

  $spec.setting.reportingFrequency = 0

  _this $ = get-view-Id "AlarmManager-AlarmManager.

  # Create alarm

  _this $. CreateAlarm($entity.) MoRef, $spec)

  # Disconnect the vcenter

  Disconnect-VIServer $vc - confirm: $false

  I am now writing a block to edit the task scheduled every hour.

  -Mark

• Profiles of the host

  If I install ESXi 5.1 on a new host. Can I ask my host profile that was created using ESX 4 Host.

  Please suggest...

  No you can't. If you went to a former host to the version 5.1 which do not have the host applied profile, you can create a new profile of the host of this host.

  Basically, the profile of the host's specific version for major versions 4.0, 4.1, 5.0, 5.1. Even if you manage to apply an older profile for a new host things might break everything.

  An example: how would host ESXi 5.1 know service console ports? He only knows vmkernel ports.

• DefaultPSP change by PowerCLI/Host profile does not stick...

  5.0u2 ESXi

  $vH = get-Cluster 'Test ' | Get-VMHost 'Test1 '.

  $vHcli = get-EsxCli - VMHost $vH

  $vHcli.storage.nmp.satp.list)

  $vHcli.storage.nmp.satp.set ($true, "VMW_PSP_RR", "VMW_SATP_DEFAULT_AA")

  $vHcli.storage.nmp.satp.set ($true, "VMW_PSP_RR", "VMW_SATP_ALUA")

  $vHcli.storage.nmp.satp.list)

  Shows that the DefaultPSP is changed correctly.

  However, after a reboot of the host, reset! If I SSH as ROOT and change the parameter it takes and rest!

  On a side note, the host NMP profile settings have the same behavior applies, it does not stick after reboot.

  Anyone know why this problem occurs, or how to fix so I can perform PSP checks and rehabilitation through PowerCLI instead of going to each host as Root to set adequate configs?

  -vFantastic

  Well, I found the default Round Robin ESXi 5.0U1 PSP, and it solved my problem. with the following...

  $vHs = get-VMHost

  {ForEach ($vH to $vHs)

  #Getting ESX CLI for each host

  $vHcli = get-EsxCli - VMHost $vH

  #Does it have the correct PSP for IBM SVC

  $SVC = $vHcli.storage.nmp.satp.list () | Where {$_.} Name - eq "VMW_SATP_SVC" - and $_. DefaultPSP - don't 'VMW_PSP_RR"} | Select @{N = 'Cluster'; E={$VH.parent.name}},@{N="vmhost '; E = {$VH. Name}}, DefaultPSP, Name

  If ($SVC. Name - eq "VMW_SATP_SVC" - and $SVC. DefaultPSP - don't 'VMW_PSP_RR') {}

  #Create a low-level object that points to the ATAS namespace:

  $LowLevel = $vHcli.TypeManager.CreateDynamicManagedObject ($vHcli.storage.nmp.satp.id)

  #Create a hashtable containing parameter values. Note that here we do not specify a value for the boot parameter:

  $Params = @{'DefaultPSP' = "VMW_PSP_RR"; ATAS = "VMW_SATP_SVC"}

  #Invoke set operation on the $LowLevel object:

  $LowLevel.InvokeOperation ("set", $Params)

  }

  #Does it have the correct PSP to default values

  $DAA = $vHcli.storage.nmp.satp.list () | Where {$_.} Name - eq "VMW_SATP_DEFAULT_AA" - and $_. DefaultPSP - don't 'VMW_PSP_RR"} | Select @{N = 'Cluster'; E={$VH.parent.name}},@{N="vmhost '; E = {$VH. Name}}, DefaultPSP, Name

  If ($DAA. Name - eq 'VMW_SATP_DEFAULT_AA' - and $DAA. DefaultPSP - don't 'VMW_PSP_RR') {}

  #Create a low-level object that points to the ATAS namespace:

  $LowLevel = $vHcli.TypeManager.CreateDynamicManagedObject ($vHcli.storage.nmp.satp.id)

  #Create a hashtable containing parameter values. Note that here we do not specify a value for the boot parameter:

  $Params = @{'DefaultPSP' = "VMW_PSP_RR"; ATAS = "VMW_SATP_DEFAULT_AA"}

  #Invoke set operation on the $LowLevel object:

  $LowLevel.InvokeOperation ("set", $Params)

  }

  }

• Help with Host Profiles and necessary PowerCLI

  Hello

  I have 2 questions about using PowerCLI for edit vSphere Host Profiles:

  (1) how can I clone a host profile, using PowerCLI?

  (2) how can I change the host profiles, using PowerCLI, update these settings?
  (a) name of host - DNS configuration - configuration networking
  (b) setting up authentication - setup of Active Directory - domain name

  
  Thank you!

  Kind regards
  Harold

  (1) there, in the current version no cmldets to clone a hostprofile.

  But you can use the API. Something like that

  $hostProfileName = "MyProfile" $prof = Get-VMHostProfile -Name $hostProfileName 
  
  $profMgr = Get-View HostProfileManager
  $spec = New-Object VMware.Vim.HostProfileCompleteConfigSpec $spec.Annotation = $prof.ExtensionData.Config.Annotation$spec.ApplyProfile = $prof.ExtensionData.Config.ApplyProfile$spec.CustomComplyProfile = $prof.ExtensionData.Config.CustomComplyProfile$spec.DisabledExpressionList = $prof.ExtensionData.Config.DisabledExpressionList$spec.Enabled = $prof.ExtensionData.Config.Enabled$spec.Name = $prof.ExtensionData.Config.Name + " - COPY"
  $profMgr.CreateProfile($spec)
  

  (2) changing the settings in hostprofiles can be done, but the ILO requires a thorough knowledge of the workings of

  See for example my change of the root password in host and profiles of the host .

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• Update the profile of UCS after adding vNIC?

  I've got profiles service and blades running off this service profile. Each blade has two vNIC and I must add two vNIC more their. I want to add the additional vNIC to the models and let the service profiles "updated" with the new vNIC. This happens automatically if the models are "updated", but all my models are currently "initial" so they wont push the new config vNIC on the blades.

  To get the blades to recognize the new vNIC should I re - link models with the new vNIC to the profile service, or is it a 'push' that I can trigger model somewhere that I'm missing?

  The blades are running ESX and I don't want an unplanned restart.

  Thank you!!!

  GAK

  Greetings Ganesh,

  When you use static models (Initial report), the only way to apply your changes would be to untie/re-bind the SP with the updated model.  As it is an "original" model, you can make changes without them "pushed" immediately.

  As a great value, the best option for you would be to:

  1. remove your SP to the SP model

  2. Add the new vNIC to the SP Model (currently has nothing attached/linked to it)

  3. place your first ESX host in maintenance mode & close.

  4 link again this ESX host service profile to the model (this will cause a re-association event)

  5. turn on your ESX host & check for changes

  6. Repeat steps 3 to 5 for your remaining ESX hosts.

  Let me know if you have any other questions.

  Kind regards

  Robert

  * Note: I much prefer original models for the reason that they don't PUSH configuration changes that can potentially cause a reboot.  Updated models are good if you make profile changes that do not require a reboot to apply - IE. Add or remove a VLAN.  Apart from that, your Initial model will keep your changes "locked" without risking any config accidental push/reboots.

• With the help of ASA as a tool for deployment of profile Anyconnect

  I have a requirement to use a router ASR as a head of network clients Anyconnect IKEv2.  I want to use the ASA firewall to allow users (multiple operating systems - Win/Mac/Linux) for ease of deployment, download their respective Anyconnect customers as well as the required profile to connect to the ASR.  Note that the ASA is used only for AC and AC downloads profile, he participates in any VPN termination.  Users will just point their browser to the ASA firewall web page and download the client from HQ and the profile, then they will launch the AC and connect to the router ASR.

  My question is, is it possible?

  Thank you!

  I guess it should work even if I haven't tried it personally.

  Note that above ' ASA shows a screen connection in the browser window, and if the user meets the logon and authentication. So you have an SSL connection without client on the ASA FRONT to take the step "downloads the client...". ».

  You should be able, from here, download the client and profile and have the host of profile configuration to point to the address of the router ASR.

• Disappear the hostname when SSH on ESXi host

  Hello experts,

  I just installed costs the ESXi host but 5.5u3 when ssh to that host is strange, its disappear before host name ~ order as an attachment.

  

  One has had this problem?

  Thanks in advance.

  Sorry it was Linux settings.

  Below is entered in my esxi host /etc/profile.local

  Export PS1 = "[$(echo ${VI_USERNAME//'\'/'\\'}) @\h:\w].

  It should work, if not paste your profile.local output file.

  Thank you

  Hentzien

• Checklist for add hosts in a cluster 5.1 existing?

  We have a cluster 5.1 existing and add in some extra guests.  Someone at - it tests, you would normally before making a new host a cluster of production existing?  Did not know if people sometimes double check switches or disable initially DRS and vMotion VM test on new hosts to test connections, etc.  The new hosts match with existing hosts, VCA is not a matter of concern.

  Thank you

  Danny

  Here are a few things I check

  (1) make sure that the BIOS settings are the same on all hosts

  (2) physical switch ports are correctly configured with the required VLANs, truck MTU, etc...

  (3) If you use vSS make sure you that the vSwitches and the relevant port group are created

  (4) required LUN is mapped to the host

  (5) If you host the profile in place that apply and check for any issue of non-compliance

  (6) the test HA, vMotion, Storage vMotion with the test VM and make sure the virtual machine is able to network when the new host

• Home profiles - odd request

  Hello

  I have a starnge query, it's not achiveable. I have a host in a cluster and host atachehed profile for them. one day, I noticed that the application of profile control happened (don't know how-i belive this is due to the nworks in our environment, we have installed) and the army in this group is out of compliance. And now I see on the summary page of each host "Configuration problems - host is not in accordance with the profile of the attached host. My question is how to get rid of this warning message on the esx host Summary tab. I know a way to get rid of this message is to correct the problems and re-run checks of compliance - easy, all guests in line again.  But if I want to run the verification of comnplaince and that he wanted to get rid of this message. I know it sounds strange but I'm right about this - I don't want to set any profile on these hosts. Please advice.

  Thanks in advance.

  See you soon

  If you just want to remove the profiles of the host (and not use them longer):

  1 note which host profile is attached to the cluster & guests. Click the cluster, and then click on the tab 'profile of compliance '. The upper area contains information indicating "host profile: ABC" where "ABC" is the name of the profile.

  2. click on home and then choose "Host Profiles" under the administration section to see a list of all profiles of vCenter. Right-click on the 'ABC' profile found in step 1 and choose attach/Cluster host"." You will then see a window of all hosts and clusters with the attached profile. Select the cluster in the right panel 'Attached entities' and click the 'Remove' button to remove. You will be asked to remove all related hosts.

  This will effectively remove profiles of the host of your hosts.

• Oracle B2B Channel Clarification

  CHANNELS
  Inbound:
  1. What is the purpose of distance Trading Channel Partner (PSTN)? When the files are only consumed listening channel. Channel partner used only for outbound scenarios, out of B2B?
  2. the notion of internal control (feature film) in channel host configuration and setup of tuned strings.
  A. when a listening channel is unchecked to do as well as external, in accordance with the oracle documentation the channel can be used by remote Trading Partners.
  How can this be achieved? What are the possible scenarios?
  B. when a Trading Partner Channel host is disabled to make it as external, according to the documents, that it could be used by the channel remote Trading Partner.
  In fact this configuration, able to see the chain Home Trading partner agreement setting in the drop-down list of the remote Trading partner
  channel selection.
  
  Outbound:
  1. What does Channel listening an outgoing Transaction mean?
  Confused with the documentation, please help understand...
  
  Thank you

  http://Anuj-Dwivedi.blogspot.in/2010/10/listening-channel-vs-host-TP-channel-in.html

  1. What is the purpose of distance Trading Channel Partner (PSTN)? When the files are only consumed listening channel. Channel partner used only for outbound scenarios, out of B2B?

  Remote TP channel is used to send messages to this TP (outbound scenario, TP B2B/host remote TP message sending). Channel listen serves two purposes.

  1. to receive the documents of middleware (when internal box is checked) for outbound scenario
  2. to receive remote TP documents (where the inner box is unchecked) for inbound scenario

  2. the notion of internal check (feature film) channel host configuration and setup of tuned strings.

  If a string created under host TP profile is marked as internal, then it can be used to move incoming transactions of TP remotely to middleware to place desired (if you do not use the default AQ./JMS queue). If the channel created under host THAT TP is not marked as an intern and then, it can be used as a channel shared remote TP, which means by creating once in one place, you can use the same remote channel TP channel for n number of TP remotely

  That means listening Channel an outbound Transaction mean?

  B2B is a gateway component, it receives the message from the back and sends it to the remote TP scheduled for outgoing cases. Now to receive the messages of lats, it uses channels to listen (if you do not use default AQ./JMS) that are marked as "internal".

  Similarly for incoming cases, if the partners want to send the file by non-HTTP channel, then you must create a channel (not marked as internal) look for her. For HTTP scenarios, B2B uses default HTTP receivers.

  Through the blog above to understand in detail.

  Kind regards
  Anuj